Parts for Kitchenaid KFIV29PCMS00: 04 - Refrigerator Door Parts

Replacement 8-18 thread screw for securing panels and components in bottom-mount refrigerators. Replaces missing, stripped, or corroded screws.

Replace your refrigerator's ice compartment door to restore proper sealing and access. Fixes cracked or warped doors affecting ice dispensing. Confirm fit.

Replace your refrigerator door closer if it's cracked, broken, or missing. This part helps the door close smoothly and securely on your bottom-mount unit.

This door closer secures the appliance door and helps it close smoothly so the unit seals correctly. It restores proper door engagement and reduces gaps that can cause leaks or operation errors. What it does:

• Acts as the door latch/closer to hold the door shut during operation
• Helps the door close smoothly and stay aligned for a tight seal
• Commonly replaces worn or broken closers that prevent the door from latching
• Can resolve symptoms like a door that won't stay closed, won't latch, or closes unevenly

• Disconnect power and any fuel source before beginning work
• Remove the door or access panel per your model's instructions to reach the closer
• Inspect mounting points and strike before installing; align the latch for smooth operation
• Test the door several times after installation to ensure proper engagement and sealing

Replacement mullion rail for refrigerators. This rail forms part of the center divider between compartments. Order a new one if yours is cracked or broken.

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

Replacement door handle for refrigerators. Installs on the exterior door. Needed when original handle is cracked, broken, or worn from use.

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

• Fastens covers, trims, brackets, and internal parts to the cabinet/frame
• Used wherever a #8-18 x 5/8 screw is specified
• Replace if the original is missing, corroded, stripped, or will not tighten
• Symptoms: loose or rattling panels, gaps, or hardware that backs out

• Disconnect power; shut off gas/water before servicing
• Match thread and length; start by hand to avoid cross-threading
• Use the correct driver bit and tighten snugly—do not overtighten
• Inspect and replace damaged clips or tabs before securing

Cushions refrigerator door against frame to prevent metal contact. Replace worn or missing bumper to restore smooth closing and protect surfaces from chips.

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This metal rack holds food at the proper distance from the broiler element during broiling, positioned in the upper portion of the oven cavity. Replace when the trivet is warped, has broken wires, or no longer sits level in the oven.

Replacement outer trim frame that secures your refrigerator door bin in place. Needed when original frame is cracked, warped, or broken causing bins to wobble or fall.

6 - 19 x .250

Seals the refrigerator door to maintain consistent temperature and improve energy efficiency. Replace if worn, torn, or compressed. Verify fit with your model.

Secure refrigerator components with this mounting clip. Replace if broken, cracked, or loose to prevent rattling and ensure proper part alignment.

This refrigerator ice level control board monitors ice production and storage levels in your automatic ice maker. It signals when to stop making ice when the bin is full and resume production when ice is needed. Replace this control board when your ice maker overproduces ice, fails to stop when full, or doesn't restart ice production when the bin empties.

Replacement cover panel for bottom-mount refrigerators. Installs on exterior or interior surfaces. Order if original is cracked, broken, or missing.

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

• Fastens panels, brackets, and internal components in the appliance cabinet
• Helps maintain proper alignment and reduce vibration or rattling noises
• Restores a tight fit where original hardware is missing, damaged, or stripped
• Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened

• Disconnect power; for gas models, also shut off the gas supply
• Replace one fastener at a time to preserve alignment and match to the original hardware
• Use the correct driver; start threads by hand to avoid cross-threading
• Do not overtighten into sheet metal

Replacement cover panel for bottom-mount refrigerators. Installs on interior or exterior surfaces. Order when original is cracked, damaged, or missing.

Ice maker stopped making ice or won't turn off? This ice level control board monitors bin levels to control ice production. Simple DIY repair.

Plastic storage bin that mounts on the refrigerator door to hold condiments and small items. Replace when cracked, broken, or missing to restore door storage.

This is a gray rubber door gasket designed to seal the French door on a refrigerator. It attaches along the perimeter of the door to create an airtight seal that keeps cold air inside the compartment. Replace this gasket if you notice condensation forming around the door edges, frost buildup inside the refrigerator, or if the seal appears cracked, torn, or no longer holds firmly against the cabinet.

Fix ice clumping and frost buildup in your dispenser chute. This flipper spring returns the ice door to closed position, keeping warm air out. Easy DIY fix.

This replacement water tube restores the appliance's internal water pathway so the dispenser and ice system can receive water. It replaces a cracked or clogged line to stop leaks and restore reliable water flow. What it does:

• Routes water from the inlet to internal components such as the dispenser and ice system
• Prevents leaks when replacing cracked or brittle tubing
• Helps restore water flow when the tube is kinked, clogged, or damaged
• Supports proper ice production and dispenser operation when functioning correctly

• Shut off the water supply and unplug the appliance before starting
• Handle tubing gently to avoid kinks; inspect and replace any worn fittings or seals
• Tighten connections to manufacturer torque recommendations and check for leaks after turning water back on