Parts for Kitchenaid KFIV29PCMS03: 07 - Shelf Parts

This refrigerator door handle provides a sturdy, user-facing grip so you can open and fridge door easily and safely. Designed to match the original mounting points for a direct-fit replacement. What it does

• Restores a secure handhold when the original handle is cracked, broken or missing
• Re-establishes proper grip for opening and closing the refrigerator door
• Prevents use-related damage to the door edge and finish from improvised handles
• Fits original mounting locations to align with existing hardware

• Disconnect power or follow manufacturer safety recommendations before servicing near sealed compartments
• Remove any trim or fasteners covering mounting screws; retain screws if they are reused
• Support the door while removing or reinstalling the handle to avoid stress on the door or hinges

This center plate slide guides and supports the plate assembly, restoring smooth sliding and stable alignment for the plate mechanism. Replaces a cracked, worn, or missing center slide to reduce binding and noise. What it does:

• Centers and guides the plate or sliding tray so it moves evenly along its track
• Prevents the plate from tipping or shifting during use
• Reduces binding, scraping, or noisy operation caused by a damaged slide
• Restores proper alignment for reliable plate travel

• One center plate slide

• Disconnect power (or unplug) and follow the appliance service manual before starting any repair
• Typically installs by snapping or fastening into the existing bracket or track—verify fastener type for your model
• Inspect surrounding guides and rollers; replace damaged components to ensure smooth operation
• Use basic hand tools;

The Heater is an OEM part for Whirlpool refrigerators. It is an essential temperature control component located inside the refrigerator compartment. The heater works to maintain consistent cool temperatures by heating evaporator coils and circulating airflow inside the fridge. 

Causes of a bad heater include failures in the heating element over time, moisture damage to electrical components, or loose connections to the power supply.  

Symptoms of a bad heater are:

• Fluctuating and unstable interior temperatures  
• Frost or ice buildup inside the refrigerator
• The refrigerator failing to consistently cool food properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement crisper pan for refrigerators that provides a flat, removable surface to hold fruits and vegetables and helps contain spills for easier cleaning and storage. What it does

• Holds produce and other refrigerated items securely in the crisper compartment.
• Contains spills and drips to protect the compartment below.
• Helps restore usable storage when the original pan is cracked, broken, or missing.
• Reduces mess and makes drawer cleaning faster.

• Remove all food from the crisper drawer before replacing the pan.
• Slide the old pan out, wipe the compartment clean, then position and slide the new pan into place.
• Most replacements are straightforward and require no tools; if the pan does not seat properly, check the refrigerator's parts diagram.

A replacement crisper drawer front panel that restores the appearance and proper closure of the refrigerator crisper compartment. Replaces a cracked, chipped, or damaged front to help the drawer sit and seal correctly. What it does:

• Replaces the damaged or worn front panel on the crisper drawer to restore fit and finish.
• Supports the crisper bin and helps the drawer slide and seat correctly in the cabinet.
• Helps reduce drafts and keeps produce contained when the original front is cracked or warped.
• Restores the refrigerator's interior appearance and eliminates cosmetic damage.

• Always unplug or switch off the refrigerator before beginning any repair.
• Remove food and the crisper drawer before installation; support shelves or components as needed.
• Basic hand tools (screwdriver) may be required; reuse existing screws/clips unless replacement hardware is specified.

The Snack Pan is an OEM part for Whirlpool refrigerators. This pan provides a designated storage area for snacks and small food items, helping to keep the refrigerator organized and maximizing storage efficiency. It slides in and out for easy access, making it convenient to reach stored items.

Causes of a bad snack pan can include cracking or breaking due to mishandling, wear and tear over time, or damage from heavy items being placed inside. 

Symptoms of a bad snack pan include:

• Cracks or breaks in the plastic
• Difficulty sliding the pan in and out
• The pan not fitting securely in its designated spot
• Visible wear that compromises its integrity

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This glass shelf assembly replaces a cracked, broken or missing refrigerator shelf to restore stable storage and easy-to-clean shelving. The durable shelf provides a flat surface for storing food and containers and helps contain spills. What it does:

• Provides a stable, level surface for refrigerated items
• Helps contain minor spills and makes cleanup easier
• Replaces cracked, chipped or missing glass shelving
• Restores proper shelf spacing and organization inside the fridge

• Disconnect power to the appliance before servicing to avoid electrical hazards.
• Handle glass carefully; support edges to prevent cracking during removal/installation.
• Remove adjacent bins/drawers or shelving as needed for access, then slide shelf into position on existing supports.
• Use only the matching shelf location and hardware from your unit's diagram; do not force into incompatible slots.

This replacement plastic divider fits into a refrigerator drawer to separate and organize stored food, keeping items from shifting and making contents easier to access. Designed to restore proper drawer organization and functionality. What it does:

• Separates compartments inside a refrigerator drawer to keep foods organized and prevent shifting
• Replaces cracked, broken, or missing dividers that allow items to mix or slide
• Restores intended drawer layout for proper storage and easier access
• Simple, passive part — no electrical function

• High-level, do-it-yourself friendly: typically snaps or slides into the drawer track
• Remove food and drawer before installing to avoid damage or spills
• Inspect mating tracks or clips for damage; replace damaged hardware if divider won't secure

This tempered glass crisper shelf provides a stable, easy-to-clean surface for the refrigerator crisper compartment so fruits and vegetables sit level and stay organized. Restores proper support and visibility in the crisper area. What it does:

• Replaces a cracked, chipped or missing crisper shelf to restore a flat surface for produce
• Supports the crisper drawer and helps keep items from falling into lower compartments
• Provides a smooth, easy-to-wipe surface that resists stains and spills
• Fits into the crisper compartment shelving supports for secure placement

• One (1) tempered glass crisper shelf

• Remove food and drawers from the crisper area before installing
• Handle with care and wear gloves; glass edges can be sharp if damaged
• Set the shelf into the existing shelf supports; do not force or flex the glass
• If the shelf is cracked or broken, discard damaged pieces safely before installing replacement

This 29" crisper cover is the refrigerator shelf that sits over the crisper drawer, providing a stable surface and helping contain spills. It restores a flat shelf surface and supports proper storage above the produce drawer. What it does:

• Replaces a cracked, chipped or broken crisper cover so food and containers rest evenly above the crisper
• Helps contain spills and makes cleanup easier by providing a removable shelf surface
• Supports items stored on top of the crisper drawer to prevent sagging or tipping
• Restores the original fit and appearance of the refrigerator's produce area

• One 29" crisper cover

• Remove items from the cover and crisper drawer before replacing
• Lift out the old cover per your refrigerator's service instructions and set the new cover into the same guides or supports
• Handle the cover carefully—glass covers can chip or break if dropped

This rear crisper drawer support secures and aligns the refrigerator crisper, keeping the drawer stable and allowing smooth sliding. Replace a worn or broken rear support to restore proper drawer fit and prevent sagging or misalignment. What it does:

• Holds the rear of the crisper drawer on its track so the drawer stays level during use
• Guides and stabilizes drawer movement to prevent sticking or uneven travel
• Prevents the crisper from tilting, falling, or binding when opening and closing
• Works with the existing front support and drawer components to maintain fit

• One rear crisper drawer support (quantity: 1)

• Remove food and the crisper drawer before replacing the support
• Most repairs are simple and require only basic hand tools; handle plastic parts gently to avoid damage
• Disconnect power to the appliance before servicing if you need to move or access electrical components

This replacement plate restores the appliance's original mounting/trim surface, helping secure nearby components and cover openings for a finished look. It's a direct-fit part used when the original plate is cracked, bent, or missing. What it does:

• Provides a stable mounting/cover surface for adjacent parts and hardware
• Protects internal components from debris and exposure
• Stops rattling or movement caused by a damaged or loose plate
• Restores proper fit and appearance where the original plate was compromised

• One replacement plate

• Designed for direct replacement of the original plate; minimal disassembly may be required
• Use appropriate tools to avoid stripping fasteners or damaging surrounding trim
• Disconnect power to the appliance (and gas if applicable) before starting work

The Drawer Slide Rail is an OEM part for Whirlpool refrigerators. It is designed to allow freezer or refrigerator drawers to glide smoothly in and out. 

Causes of a bad refrigerator slide rail can be wear and tear over long-term use. Accidental damage from overloading a drawer or rough handling can also prematurely wear out slide rails.

Symptoms of a bad slide rail include:

• A drawer that is stiff, sticks, or binds during operation
• Visible damage or bent parts along the slide rail 
• A drawer that no longer fully extends from the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This slide is the replacement drawer rail that supports and guides a range/oven storage drawer for smooth opening and closing. Restores proper alignment so the drawer rides evenly and stays securely in place. What it does:

• Provides a guided track for the appliance's storage/drawer assembly to slide in and out
• Replaces worn, bent, or broken rails that cause sticking, grinding, or misaligned drawers
• Helps prevent the drawer from slipping off its track or falling when opened
• Restores stable, consistent drawer movement and proper closure

• One replacement slide

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Remove the drawer and any obstructions; install the slide in the same orientation as the original
• Basic hand tools are typically required; keep fasteners and mounting positions consistent

This decorative trim piece restores the appliance's finished appearance and covers the edge between panels. It replaces damaged, dented, or scratched trim to keep the unit looking clean and factory-finished. What it does

• Covers and protects the exposed edge of the appliance panel for a finished look
• Replaces bent, cracked, or cosmetically damaged trim
• Helps maintain proper panel alignment and prevents gaps where dirt can collect
• Visible wear or loose fit are common indicators it needs replacement

• One decorative trim piece

• High-level: remove power and follow appliance-specific service manual before starting
• Use appropriate trim/door fasteners and avoid overtightening to prevent cracking
• Support the door during removal to avoid damage

This slide is a direct-fit replacement guide that restores smooth, stable movement for a refrigerator drawer or shelf. It helps the drawer track correctly and prevents binding or uneven operation. What it does:

• Guides and supports a refrigerator drawer or shelf for smooth, controlled opening and closing
• Replaces worn, damaged or missing slide hardware that causes sticking or uneven movement
• Helps maintain correct alignment so the drawer loads and unloads without jamming
• Commonly used when a drawer drops, tilts, or does not track properly

• One replacement slide

• High-level installation: remove the drawer or shelf, unfasten the old slide, and install the new slide using existing mounting holes and hardware
• Inspect mating tracks and mounting points for damage; clean debris before installing
• Use proper tools and avoid overtightening fasteners to prevent cracking the slide or mounting bosses
• Disconnect power only if required by your appliance model; follow all manufacturer safety instructions

This replacement screw fastens trim, panels and small components to restore secure attachment and reduce rattling or movement. Use when a screw is missing, stripped, or damaged to keep parts aligned and operating quietly. What it does:

• Secures panels, brackets and trim to appliance assemblies
• Prevents vibration, rattling and misalignment caused by missing or damaged fasteners
• Replaces lost or stripped screws that can allow gaps or loose parts
• Helps maintain safe, stable operation by keeping components properly fastened

• Disconnect power (and water if applicable) before accessing interior panels
• Use the proper screwdriver or driver bit to avoid stripping the head
• Align parts before tightening and tighten until snug—do not overtighten
• Replace only with the correct OEM part to ensure proper fit and function

This front crisper drawer support secures the refrigerator's front crisper drawer for smooth sliding and correct alignment, reducing sagging and sticking so stored items stay accessible and the drawer operates reliably. What it does:

• Holds the front corner of the crisper drawer in place so the drawer slides and aligns properly.
• Prevents drawer sagging, catching, or uneven movement that can make the drawer hard to open or close.
• Helps maintain proper drawer positioning to protect stored produce and prevent rubbing on the cabinet.
• Works with the existing drawer track and rear support.

• Unplug the appliance or disconnect power before starting any service to reduce electrical risk.
• Empty and remove the crisper drawer before replacing the support; follow the refrigerator's parts diagram for correct orientation.
• Inspect the drawer track and rear support for wear; replace any damaged components to restore smooth operation.

This cover is an access panel that protects internal components and gives the appliance a finished appearance. Replacing a damaged or missing cover helps prevent dirt and moisture from entering and keeps wiring and parts enclosed. What it does

• Shields internal components from debris and accidental contact
• Restores a finished exterior where a panel was cracked, warped, or missing
• Helps maintain proper airflow pathways by covering openings
• Reduces risk of damage to wiring or small parts from bumps or spills

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Use basic hand tools; some models require removing adjacent trim or panels
• Handle carefully to avoid scratching the finish; wear gloves to protect hands

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

This replacement outer access cover protects internal components and closes an access opening on the appliance, restoring a finished appearance and helping keep dust and debris out of service areas. What it does

• Covers and protects internal components behind an access opening or panel
• Helps prevent dust, lint and debris from entering service areas
• Restores a secure, finished appearance after repair or maintenance
• Can reduce drafts or minor rattling caused by a missing or damaged cover

• Disconnect power before beginning any repair to avoid shock or injury
• Remove any fasteners or retaining clips holding the old cover; keep hardware if reusing
• Align cover tabs or screw holes, then fasten securely without over-tightening
• If the cover mates to a seal or gasket, inspect the seal and replace if worn to ensure a proper fit