Parts for Kitchenaid KRFF300ESS03: Shelf Parts

Restore stable, level storage with this full-width refrigerator glass shelf. It replaces a cracked, missing, or unstable shelf so you can safely organize food and help keep messes contained within the shelf area.

• Spans the compartment to provide a sturdy, level surface for food and containers
• Helps contain small spills to limit messes reaching lower shelves or drawers
• Replace if the glass is cracked/chipped, the shelf sags, or it no longer seats securely
• Restores the intended fit and usable storage space for the designated shelf position

• Clear the area and remove the old shelf
• Angle the shelf as needed; insert the rear into the side-wall supports, then lower the front until fully seated
• Handle glass by the edges and wear cut-resistant gloves
• Do not force; ensure the shelf is aligned with the correct support slots

This is a refrigerator cantilever shelf with a flip-up front section. It provides adjustable storage and lets you temporarily raise the front portion to fit tall items without removing the shelf.

• Supports food and containers on the fresh food shelf rails
• Front section flips up to create extra vertical clearance
• Helps restore proper organization if the original shelf is cracked or missing
• Common symptoms: broken frame, missing or loose shelf, reduced storage flexibility

• Unplug the refrigerator before servicing
• Remove food items; lift the shelf slightly and pull forward to disengage from the side rails
• Align replacement on the rails and slide fully into place
• Handle glass components carefully to avoid injury or damage

This center rail track supports and guides a sliding assembly inside your appliance, keeping the rack or drawer aligned and moving smoothly. Replace a cracked or bent center track to restore easy, stable operation and reduce binding. What it does:

• Provides the middle guide surface for a slide system
• Maintains level alignment with the mating rails
• Allows smooth in-and-out travel of the rack/drawer
• Typical symptoms: sticking or rough movement, derailment, tilting, or visible cracks/warping

• 1 center rail track

• Unplug or disconnect power before servicing; shut off gas if applicable
• Remove the rack/drawer and note the rail's orientation for reassembly
• Reuse existing fasteners and transfer any clips/brackets from the old track
• Test for smooth travel before returning to service

Restore safe, usable storage space with this 2/3-width refrigerator glass shelf. It provides a strong, easy-to-clean surface in the designated flip-style shelf position when the original shelf is cracked, missing, or won't seat securely.

• Provides a level, durable surface in the 2/3-width shelf location
• Works with the flip-style position to help accommodate taller items when configured
• Restores lost storage area and proper support for everyday items
• Typical symptoms: cracked/chipped glass, broken frame tabs, shelf won't stay in place, missing shelf

• Handle tempered glass carefully; wear cut-resistant gloves
• Allow shelf to reach room temperature before washing to avoid thermal shock; clean with mild soap
• Engage rear hooks/tabs in the cabinet slots, then lower the front into the supports; confirm both sides are fully seated
• Transfer any trim from the original shelf if applicable

The Refrigerator Track is an OEM part for Whirlpool refrigerators. It supports and guides the movement of refrigerator drawers or shelves, ensuring they slide in and out smoothly. The track measures approximately 11 inches in length.

Causes of a bad track can include wear and tear from frequent use, damage from overloading the drawers or shelves, or breakage due to accidental impact. Over time, the track can become misaligned, cracked, or lose its ability to support the drawer properly.

Symptoms of a bad track include:

• Drawers or shelves that do not slide smoothly or get stuck
• Uneven or tilted drawers
• Noise when opening or closing the drawers
• The track appears damaged or broken

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Refrigerator Drawer Track is an OEM part for Whirlpool refrigerators. It provides a stable guide for the refrigerator drawers, ensuring they slide in and out smoothly for easy access to stored items.

Causes of a bad drawer track can include normal wear and tear from frequent use, buildup of dirt and debris, or physical damage from overloading the drawers or accidental impact. When the track becomes worn or damaged, it can impede the drawer's functionality.

Symptoms of a bad drawer track include:

• Difficulty opening or closing the refrigerator drawers
• Drawers getting stuck or not sliding smoothly
• Misalignment or falling off the tracks
• Unusual noises when operating the drawers

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace a cracked or missing produce bin with this crisper pan. It fits in the refrigerator's fresh-food compartment beneath the crisper cover, restoring a smooth-sliding drawer to keep fruits and vegetables organized and contained. What it does:

• Holds and organizes produce in the fresh-food section
• Slides on the crisper rails beneath the crisper cover
• Helps contain minor spills within the drawer
• Typical symptoms: cracked/broken bin, missing tabs, or a drawer that won't slide properly

• 1 crisper pan

• Disconnect power to the refrigerator and clear the crisper area
• Pull the old pan out and tilt to release; remove the crisper cover/shelf if needed for clearance
• Transfer any reusable parts from the old pan
• Align the new pan with the rails and slide fully into place; restore power

This 8" crisper pan is the replacement drawer insert that captures moisture and keeps fresh produce organized in the refrigerator. It restores proper storage and helps maintain humidity for fruits and vegetables. What it does:

• Serves as the removable bottom for the crisper drawer, holding produce and loose items
• Collects drips and small spills to protect the refrigerator interior
• Helps preserve produce by maintaining a stable environment in the crisper area
• Replaces cracked, chipped, warped, or missing crisper pans that can catch water or cause items to tilt

• One crisper pan

• Unplug the refrigerator or disconnect power before starting if you will be moving heavy components
• Empty and remove the crisper drawer, then lift out the old pan
• Seat the new pan fully in the drawer frame and ensure smooth drawer operation before returning contents
• Handle carefully to avoid chips or cracks; do not force or pry into place

The Pantry Cover Glass Tempered is an OEM part for Whirlpool refrigerators. This tempered glass cover fits over the pantry or deli drawer, providing a durable and transparent barrier that allows visibility of the drawer's contents while maintaining an organized storage space.

Causes of a bad pantry cover glass can include accidental impact or dropping, which can lead to cracks or shattering.  

Symptoms of a bad pantry cover glass include:

• Cracks or chips in the glass
• Shattered or broken glass pieces
• Difficulty in fitting the cover securely over the drawer
• Visible wear that affects the appearance and functionality

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This pantry deli pan assembly replaces the removable pan in the refrigerator pantry/deli drawer so you can store deli meats, cheeses and other small food items neatly and securely. Restores the pantry drawer's storage surface and containment. What it does:

• Provides a shallow removable pan for the pantry/deli drawer to hold and contain deli items and small packages
• Restores a clean, even surface for storing foods that might otherwise leak or scatter
• Helps contain spills and makes routine cleaning easier by removing and rinsing the pan
• Fits into the pantry/deli drawer support system to maintain proper drawer function

• Remove power to the appliance before doing any disassembly of interior parts
• Typically installs by sliding into the pantry/deli drawer track or snapping into the drawer frame—handle gently to avoid damage
• Inspect mounting points and drawer supports for damage before installation; replace any broken supports for proper fit
• Clean part with mild detergent and warm water before first use; avoid abrasive cleaners

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This support is a replacement mounting support that helps secure internal components and keeps assemblies aligned for reliable operation. Replaces a worn or damaged support to reduce noise and prevent misalignment. What it does:

• Provides structural support for the appliance's internal assembly to maintain correct alignment
• Helps stop rubbing, rattling, or vibration caused by a loose or broken support
• Restores proper spacing so connected parts operate smoothly
• Useful when visible cracks, deformation, or mounting failures are present

• One mounting support as shown

• Disconnect power (and water, if applicable) before starting any repair
• Inspect surrounding fasteners and gaskets; replace any damaged hardware
• Use basic hand tools; follow OEM diagram for proper orientation and torque

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wire lower freezer basket provides organized storage and easy access for frozen foods, restoring stable shelving and preventing items from shifting or falling in the freezer compartment. What it does:

• Replaces a cracked, bent, or missing lower freezer basket to restore proper storage
• Supports frozen items and keeps smaller packages contained and accessible
• Helps prevent items from shifting during door use or when pulling out the basket
• Matches original mounting style for a secure fit and stable support

• Disconnect power to the appliance before performing service
• Remove food and any obstructing shelves or drawers before installing
• Slide or clip the basket into the original support brackets; handle wire parts carefully to avoid bending
• If mounting hardware is damaged or missing, replace with the exact OEM fasteners for a secure fit

This replacement shaft secures and supports the dryer drum, restoring smooth rotation and stable drum alignment. It's a direct-fit OEM-design shaft used where a worn or damaged shaft causes rubbing, squealing, or drum wobble. What it does

• Provides a stable pivot for the dryer drum so it rotates evenly.
• Prevents metal-to-metal contact that can cause grinding or squealing noises.
• Restores proper drum alignment to reduce wear on bearings and seals.
• Helps eliminate wobbling or uneven drum movement during operation.

• One replacement shaft

• Disconnect power before beginning any disassembly; follow the dryer's service manual.
• Installation typically requires removing the dryer front or rear panel and the drum for access.
• Inspect adjacent parts (bearings, seals, rollers) and replace if worn to prevent repeat failure.
• Use proper tools and torque.

The Freezer Drawer Gear Clip is an OEM part for Whirlpool refrigerators. It is designed to secure the gear mechanism that allows the freezer drawer to slide in and out smoothly. This clip ensures that the drawer operates efficiently, providing easy access to the freezer compartment.

Causes of a bad gear clip can include wear and tear from regular use, damage due to overloading the drawer, or breakage from accidental impact. A faulty gear clip can impair the drawer’s movement and make it difficult to open or close properly.

Symptoms of a bad refrigerator freezer drawer gear clip include:

• The freezer drawer not sliding smoothly
• Difficulty in opening or closing the drawer
• The drawer coming off its track
•  Unusual noises during the drawer’s operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: Right Hand Slide

Note: Left Hand Slide

This flip-down shelf assembly replaces a damaged or worn refrigerator door shelf to restore secure, usable storage and smooth folding action. It fits 30" shelf openings and provides a stable platform for jars and bottles. What it does:

• Replaces a broken or cracked flip-down door shelf to prevent items from falling.
• Restores smooth hinge action when opening and closing the shelf.
• Eliminates wobble or sag caused by worn mounting points.
• Helps keep frequently used items organized and easy to access.

• Remove food and other items from the door before starting.
• Disconnect power to the appliance or follow manufacturer safety guidance for door work.
• Typically installs with screws or snap-in fasteners; keep original hardware if reusing.
• If mounting points are damaged, inspect the door for additional repair before installing.