Parts for Kitchenaid KRMF606ESS01: 08 - Shelf Parts

This glass shelf replaces a damaged or missing refrigerator shelf to restore usable storage space and an even load surface. It provides a flat, easy-to-clean surface for food storage and organization. What it does:

• Replaces a broken, cracked or missing refrigerator shelf so you can safely store items.
• Provides a stable, level surface for food containers, deli items and produce.
• Helps maintain organized shelving and prevents items from shifting or tipping.
• Easy-to-clean glass surface resists stains and odors compared with porous shelving.

• Remove all items from the refrigerator compartment and support adjacent shelves before removing the old shelf.
• Slide the shelf out carefully to avoid chipping; lift straight up when reinstalling to seat into shelf supports.
• Handle the glass with care and wear cut-resistant gloves if broken glass is present.
• No electrical disconnection is typically required, but follow your appliance owner's manual for any model-specific instructions.

This refrigerator crisper pan replaces a damaged or missing produce drawer, restoring smooth operation and organized produce storage. It fits the factory rails beneath the crisper cover to keep fruits and vegetables contained and easy to access. What it does:

• Holds and organizes produce in the fresh food compartment
• Slides on the existing drawer rails under the crisper cover
• Restores function when the original pan is cracked, warped, or missing
• Common symptoms: broken corners, difficulty sliding, or the drawer coming off its tracks

• Empty the old drawer; pull straight out and lift to clear the stops
• Align the new pan with the slides and push in evenly—do not force
• If your model uses reusable trim/inserts on this drawer, transfer them from the original
• Handle any glass shelves and cold plastic carefully to avoid damage

This replacement console housing cover restores the finished exterior of the appliance's control area and protects internal switches and wiring from dust and damage. It returns a clean, secure look and helps keep controls accessible. What it does:

• Covers and protects the console/control area and underlying components
• Keeps dust, debris, and moisture away from switches and wiring
• Restores the appliance's exterior appearance after damage or wear
• Helps prevent accidental contact with control parts during operation

• One console housing cover as shown

• Recommended for technicians or experienced DIYers; disconnect power before starting
• Handle carefully to avoid scratching the finish or breaking plastic tabs
• Replace any damaged clips or fasteners with manufacturer-recommended hardware

This crisper cover is the flat shelf that sits above the refrigerator's crisper drawer, providing a stable surface for food storage and helping keep produce contained. It restores proper shelf function and organization. What it does:

• Replaces a cracked, chipped or missing crisper cover so items no longer fall into the drawer below
• Restores a level shelf surface for storing leftovers, produce and containers
• Helps maintain normal drawer operation and prevents obstruction when opening/closing
• Matches OEM fit to ensure proper alignment with adjacent shelves and drawers

• One crisper cover (shelf) assembly

• Handle carefully if the part is glass; wear gloves to avoid cuts
• Remove food and the crisper drawer before installing to access the shelf area
• Align the shelf with mounting supports and lower into place; do not force

This tempered glass shelf replaces a cracked, broken or missing refrigerator shelf and restores a stable, easy-to-clean storage surface. It supports food and containers while keeping cold air circulation consistent. What it does:

• Provides a sturdy, flat surface for storing food, containers and deli items
• Replaces chipped, cracked or shattered glass that can cause leaks or instability
• Helps maintain even airflow and organization inside the refrigerator compartment
• Fits into existing shelf supports or rails to restore normal shelf function

• Remove all items from the shelf area before installation
• Wear cut-resistant gloves and handle glass carefully to avoid injury
• Slide into the existing shelf supports/rails; do not force or flex the glass
• If shelf supports are damaged or loose, replace or secure them before use

This drum support roller replaces a worn or noisy dryer roller that helps the drum turn smoothly. Restores quiet, even drum rotation for improved drying performance and reduced wear on the drive system. What it does:

• Supports the dryer drum so it spins evenly during operation
• Reduces vibration and noise caused by worn or seized rollers
• Helps prevent premature wear on the belt and drive components
• Common symptom: loud rumbling, squeaking, or visible drum wobble during spin

• Disconnect power to the appliance before any service
• Replace worn or damaged rollers in matched pairs when recommended by the OEM
• Inspect the shaft, bearing surface, and belt for wear and replace if needed

This door shelf bin cantilever replaces a cracked or worn refrigerator door bin assembly to restore secure storage on the fridge door. It provides a sturdy shelf edge and latch support so door bins stay in place and hold items safely. What it does

• Secures and supports a refrigerator door shelf, preventing the bin from dropping or slipping
• Restores proper bin alignment and latching when original cantilever or shelf edge is broken
• Helps eliminate rattling or misalignment of stored bottles and containers
• Useful when the door bin no longer stays seated or has visible damage

• One door shelf bin cantilever assembly as shown

• High-level replacement; access the door interior by removing items and, if needed, the full door bin per your model's service instructions
• Use basic hand tools; avoid overtightening fasteners to prevent cracking nearby plastic
• Disconnect power only if service requires removing electrical components; otherwise unplugging is not typically necessary for bin swaps
• If damaged mounting clips or screws are present, replace them to ensure a secure fit

Note: This part is one screw, order quantity needed.

This small mounting retainer clip secures panels, hoses, or wiring to appliance chassis to prevent vibration and movement. It helps restore proper routing and reduces rattles or chafing from loose components. What it does

• Holds trim, panels, hoses, or wiring in place to prevent rubbing and noise
• Restores correct component alignment after repair or maintenance
• Helps reduce vibration-related rattling and wear
• Simple replacement for a broken, bent, or missing clip

• One mounting retainer clip

• Turn off and unplug the appliance before inspecting or replacing clips
• Remove only the minimal surrounding parts needed for safe access
• Clip may require gentle pressure to seat; avoid forcing or prying on nearby plastic
• Replace all matching fasteners for secure fit

This replacement divider restores simple organization inside the refrigerator by separating items on a shelf or bin to reduce shifting and spills. It replaces a cracked, broken or missing factory divider and helps keep stored items upright. What it does:

• Creates separate zones on a shelf or bin to keep bottles, jars and small items from sliding together
• Helps prevent items from tipping or falling when the door or drawers are moved
• Replaces worn, broken or missing dividers to restore proper fit and stability
• Works with the fridge's existing slots or tracks for a secure hold

• Typically installs by snapping into existing slots or sliding into the shelf/bin track; no special tools are usually required
• Remove food and the affected shelf or drawer for easier access and to avoid mess
• Do not force the part into place; inspect mounting clips or tracks and replace any damaged hardware
• If working near electrical components or lights, unplug the appliance or switch power off before starting

This replacement floor is the cabinet base panel that supports internal components and helps seal the bottom of the appliance. Restores proper fit and airflow management at the unit's base for safer, quieter operation. What it does

• Replaces a damaged, corroded, or bent cabinet base that can allow debris or moisture into the appliance
• Helps maintain correct mounting and alignment for internal components located at the bottom
• Reduces rattles and vibration caused by a loose or misshapen base panel
• Helps preserve enclosure integrity to support proper airflow and prevent small-object entry

• One cabinet base panel

• Recommended for technicians or experienced DIYers; appliance should be unplugged or power/fuel disconnected before starting
• Inspect adjacent seals, brackets, and fasteners; replace any worn hardware for best fit
• Use appropriate tools and protective gloves; sharp edges may be present on metal panels
• Verify part fit and orientation against your unit's exploded view diagram before final assembly

The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly. 

Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.

Symptoms of a bad door switch include: 

• The refrigerator fails to resume cooling after closing the door
• The inside light fails to turn on when the door is opened
• Abnormal energy usage due to improper door monitoring

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Thermistor is an OEM part for Whirlpool refrigerators. As a temperature-sensitive sensor, it tracks compartment climates to maintain fresh food safety.

Causes of a bad thermistor involve cracking of its insulated body allowing moisture, as well as typical wear disrupting conductivity after years of use. 

Symptoms include: 

• Fluctuating temperatures conducive to bacterial growth  
• Constant compressor operation without reaching targets
• Error codes or inability to adjust temperature settings

This OEM Whirlpool part is also compatible with some Kenmore, Maytag, and KitchenAid models.

The Glass Shelf is an OEM part for Whirlpool refrigerators. This shelf provides a stable and durable surface for storing food items within the refrigerator, helping to keep the interior organized and allowing easy access to stored items.

Causes of a bad glass shelf can include accidental impacts, overloading with heavy items, or thermal stress from placing hot containers directly on the glass.

Symptoms of a bad glass shelf include:

• Visible cracks or chips in the glass
• The shelf not fitting securely in place
• Difficulty in removing or adjusting the shelf
• Items not being properly supported, leading to instability

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Bin is an OEM component for Whirlpool refrigerators. Providing flexible storage and organization, it fits seamlessly onto shelf tracks in the refrigerator and freezer doors. 

Durable plastic construction secures items without spills or shifting even during opening and closing cycles. Airflow vents allow rapid cooling and freezing of stored goods without obstruction.

Causes of damage to bins can include mineral leaching over time weakening plastic or stress cracks from accidental drops when overfilled.  

Symptoms of a bad bin include:

• Warped walls no longer fit runners smoothly   
• Visible cracks or breaks compromising seals  
• Missing vent slots blocking efficient air circulation
• Bins dislodging accidentally from runners on opening

Replace yours today with this genuine Whirlpool bin to restore utility for the leftover organization. Compatible with Kenmore Elite, Maytag, and Jenn-Air French door refrigerators as well.

This replacement door handle restores a secure grip and smooth opening for your refrigerator door. It installs where the factory handle has broken, cracked, or come loose, making the door easier and safer to open. What it does:

• Replaces a damaged or worn refrigerator door handle to restore normal operation and grip
• Helps prevent cuts or slips from cracked or broken plastic on the original handle
• Fits the door area and connects to existing mounting points to allow normal door opening/closing
• Commonly used when the handle is loose, chipped, or structurally failed

• Remove power to the appliance or open door fully and support it before starting work
• Use basic hand tools; handle typically fastens with screws or hidden clips—retain all hardware during disassembly
• Align handle over mounting points and tighten hardware until snug; avoid over-tightening plastic threads
• If hardware or retainer clips are damaged, replace them for a secure fit

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Pantry Drawer Wiring Harness is an OEM part for Whirlpool refrigerators. This wiring harness connects the electrical components of the pantry drawer, ensuring proper functionality and temperature control within the drawer. It helps maintain the correct temperature settings and allows for the smooth operation of the pantry drawer features.

Causes of a bad wiring harness can include wear and tear from regular use, damage from accidental pinching or pulling, or electrical faults that disrupt the connection.

Symptoms of a bad pantry drawer wiring harness include:

• Pantry drawer not maintaining the correct temperature
• Inconsistent or fluctuating temperatures within the drawer
• Pantry drawer features not working
• Error codes related to the pantry drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Stainless

The Door Switch Assembly is an OEM replacement part for Whirlpool refrigerators. It is responsible for turning the light on when you open the refrigerator door and turning it off when the door is closed. It ensures that the light functions properly, allowing you to easily locate and retrieve items from your refrigerator.

Symptoms of a faulty door light switch include:

• Interior light not turning on when the door is opened
• Interior light staying on even when the door is closed

A bad door light switch can occur due to regular use, wear and tear, or accidental damage. If you notice issues such as the interior light not turning on or off when you open or close the door, it may be time to replace the door light switch.

This Whirlpool replacement part is also compatible with Sears/Kenmore models.