Parts for Electrolux E23BC68JPS6: 09 - Shelves Parts

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

This wiring harness routes power and control signals between the appliance control board and its components so the unit can operate reliably. It replaces a damaged or faulty harness to restore proper electrical connections. What it does:

• Carries power and control signals to motors, valves, sensors and other components
• Provides factory-style connectors for secure, vibration-resistant connections
• Helps prevent intermittent operation caused by frayed wires or loose terminals
• Can resolve no-start conditions, random shutdowns, or communication error symptoms

• One complete wiring harness with factory-style connectors

• Disconnect power to the appliance before beginning any work
• Inspect connectors and wire routing; match connector shapes and pin counts before installing
• Secure harness away from hot surfaces, sharp edges and moving parts to prevent wear

This crisper cover frame supports the glass shelf above the refrigerator's crisper drawers and forms the tracks the drawers slide on. Replace a cracked or warped frame to restore stable shelving and smooth drawer operation.

• Supports the glass insert and food load above the crisper drawers
• Forms the top of the crisper compartment and the channels for drawer movement
• Helps keep drawers aligned and closing properly
• Typical failure symptoms: cracks, broken corners, sagging center, drawers binding or not closing

• Unplug the refrigerator and remove food from the crisper area
• Remove the crisper drawers and carefully lift out the glass insert before handling the frame
• Transfer any reusable trim or hardware from the old frame to the new one, if applicable
• Ensure the frame is fully seated on its supports before reinstalling the glass and drawers

This glass crisper frame supports and secures the refrigerator crisper glass, keeping produce drawers stable for everyday use. It restores proper fit and helps prevent the glass from shifting or flexing during normal use. What it does:

• Holds the crisper glass securely in place inside the fresh food compartment
• Keeps the front edge of the crisper glass aligned with the drawer opening
• Helps prevent the glass from sliding, tipping, or contacting items when drawers are opened
• Commonly replaced when frame is cracked, warped, or no longer holds the glass firmly

• One glass crisper frame

• Designed for drop-in or snap-fit installation; verify orientation before seating the glass
• Remove food and slide out crisper drawer to access frame; handle glass carefully to avoid breakage
• Use gloves and eye protection when removing or installing damaged glass or plastic parts
• Replace glass and frame together to ensure secure fit

This slide crisper cover is the glass shelf that sits above the refrigerator crisper drawer, giving a smooth sliding surface and supporting produce while keeping the crisper compartment sealed from the rest of the fridge. What it does

• Provides a durable glass surface that lets you slide the crisper drawer in and out smoothly.
• Supports fruits and vegetables while maintaining separation between the crisper and main compartment.
• Replaces cracked, chipped, or broken covers that can catch or spill food.
• Helps restore proper airflow and closure over the crisper area when damaged.

• One slide crisper cover (glass shelf) as shown.

• Remove all food from the shelf and crisper drawer before replacing the cover.
• Slide the drawer out partway, lift to disengage, then remove the old cover; reverse to install the new one.
• Handle glass carefully and wear gloves to avoid cuts from sharp edges.
• No electrical disconnection is typically required, but follow your appliance manual for safety specifics.

This genuine replacement screw secures panels and small components on select appliances, restoring fit and reducing rattles or loose parts. It's a direct-fit fastener where the original #8-18 x 3/8 screw is missing or worn. What it does:

• Fastens trim, panels or brackets to appliance frames and components
• Restores secure fit to stop rattling or misaligned parts
• Replaces stripped, rusted or missing screws that prevent proper assembly
• Matches original thread size and length for correct engagement

• Use the correct driver and engage threads straight to avoid stripping
• Do not overtighten; stop when the part is snug and secure
• Replace any damaged mating hardware for best fit
• Unplug the appliance or shut off power when accessing internal fasteners

A genuine replacement deli pan designed to fit the deli/drawer area in compatible refrigerators. Restores a stable, easy-to-clean surface for storing cold cuts, cheeses and other deli items. What it does

• Replaces a cracked, warped or missing deli pan so the deli/drawer area holds items securely
• Provides a flat containment surface to keep small items from catching on drawer tracks
• Helps keep spills and crumbs contained for easier cleanup
• Restores proper seating and alignment of the deli drawer when pan is damaged

• One deli pan

• Remove deli drawer per the refrigerator manual before replacing the pan
• Slide the pan into the drawer compartment or onto its support rails until seated
• Clean with mild soap and water; avoid abrasive pads or harsh chemicals

This support is a molded mounting bracket designed to secure and stabilize appliance components, helping keep parts properly aligned and preventing sagging or movement during use. Durable plastic construction for reliable long-term positioning. What it does:

• Secures panels, assemblies, or internal components to the cabinet or frame
• Keeps parts aligned to prevent binding, rubbing, or uneven wear
• Supports weight to reduce stress on fasteners and adjacent parts
• Helps restore original fit and function after breakage or loss

• One support mounting bracket

• Disconnect power and, if applicable, water before beginning any repair
• Confirm correct orientation and seating before fastening; use factory screw locations
• Use appropriate, non-stripping fasteners and do not overtighten
• If the original part is damaged, remove all debris before installing new support

This filter release button is the push-button used to release and remove the refrigerator water filter housing. It restores simple, one-handed filter removal so you can replace your water filter cleanly and quickly. What it does:

• Replaces a damaged or worn filter-release push button that no longer unlatches the filter housing
• Allows the filter cartridge to be released from the housing for regular replacement
• Helps resolve symptoms like a stuck, loose, or non-responsive filter release mechanism
• Fits into the filter housing assembly and engages the release latch when pressed

• Disconnect power and shut off the water supply before servicing the filter area
• Remove any trim or access panels per your refrigerator manual to access the button
• Snap or fasten the new button into the housing until it engages; avoid forcing parts

The Refrigerator Water Filter Base is an OEM part for Frigidaire refrigerators. It holds the water filter in place and provides a secure connection to the water supply, ensuring clean and filtered water flows through the refrigerator.

Causes of a bad water filter base can include wear and tear over time, damage from improper filter installation, or issues with the water connections leading to leaks. Additionally, mineral buildup from hard water can affect the performance and integrity of the base.

Symptoms of a bad water filter base include:

• Water leaks around the filter area
• Poor water flow or reduced water pressure
• Filter not fitting securely or falling out
• Unusual tastes or odors in the filtered water

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This deli air control cover protects and directs cooled air to the deli drawer, helping maintain proper airflow and temperature inside the compartment. It replaces a cracked, broken, or missing deli vent cover. What it does:

• Covers and shields the deli air control/vent assembly from debris and damage
• Directs chilled air flow into the deli/deli drawer area for consistent cooling
• Prevents rattling or vibration caused by a loose or broken cover
• Common symptom: deli drawer feels warmer than the rest of the refrigerator
• Common symptom: visible crack, missing piece, or loose vent cover

• One deli air control cover

• Disconnect power before beginning any repair
• Remove deli drawer and any obstructing shelves to access the vent cover
• Typically snaps or screws into place; align tabs and press or fasten without forcing
• If clips are damaged, replace them to ensure a secure fit and proper airflow

This genuine replacement screw secures appliance components and restores proper fit and stability. Use it to replace a missing or damaged fastener and stop panels, trim, or parts from shifting or rattling during normal use. What it does:

• Fastens and holds panels, brackets, or small components in place
• Restores secure attachment when an original screw is missing, damaged, or stripped
• Helps eliminate vibration, rattling, or loose-fitting parts
• Matches the OEM fit and function for reliable reassembly

• Use correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and remove food or contents from appliance areas as needed before servicing
• If fastener threads are damaged, replace with the exact OEM screw rather than forcing installation

This crisper cover trim restores the finished edge around the refrigerator crisper cover for a clean, factory appearance and proper seating. It replaces damaged or missing trim to help the crisper cover sit securely. What it does:

• Replaces the trim piece that finishes and protects the crisper cover edge.
• Helps the crisper cover seat correctly and reduces gaps where debris can collect.
• Restores cosmetic appearance when the original trim is cracked, worn, or missing.
• Prevents minor rattling or shifting of the crisper cover caused by damaged trim.

• Remove food from the crisper area and slide out the cover to access the trim.
• Align trim with the cover edge and press until clips or tabs engage; do not force.
• Inspect mounting clips—if they are broken the clips must be replaced for a secure fit.
• Handle glass or plastic covers carefully to avoid breakage.

This deli drawer cover (frame) replaces the clear/trim cover that protects the deli/meat compartment and helps keep contents contained and visible. Restores a secure cover and improves food containment in the drawer area. What it does:

• Replaces a cracked, chipped or missing deli drawer cover so food stays contained and visible
• Helps keep deli items separated from other refrigerator areas and reduces direct exposure
• Provides the clear viewing surface for the deli compartment so you can check contents without removing the cover
• Snaps into place on the deli drawer frame for a finished appearance

• One deli drawer cover (frame) — exact, OEM-design replacement

• Remove all food from the deli drawer before replacing the cover
• Typically snaps into the deli drawer frame; no special tools usually required
• Inspect mounting tabs for damage and align clips before pressing into place
• If tabs are broken, replacement of the mounting frame or clips may be required

This is the refrigerator crisper cover frame. It supports the pantry/crisper glass and forms the top of the humidity drawers, restoring a sturdy surface for food storage.

• Holds the crisper shelf glass and supports drawer operation
• Can crack or warp from heavy loads or impact
• Symptoms include sagging or broken shelf over crisper drawers and drawers that bind
• Restores proper fit and stability for the produce area

• Unplug the refrigerator and remove food from the shelf area
• Carefully lift out the glass before removing the damaged frame
• Transfer any trim or gaskets from the old frame if applicable
• Reinstall the frame and set the glass back into place without forcing it

This beam-style crisper cover is the glass shelf that sits above the crisper drawer, providing a flat support surface and helping contain spills while keeping produce organized. It restores the shelf surface and proper crisper function. What it does:

• Replaces a broken or missing crisper cover to restore a stable shelf over the crisper drawer
• Helps contain spills and prevents items from falling into the crisper
• Supports produce and other refrigerated items above the drawer area
• Works with the refrigerator's crisper beam/track system to maintain proper clearance and operation

• One crisper cover (beam-style) as shown

• Always unplug the refrigerator or shut off power before servicing interior components
• Remove food and any items from the shelf area before installation
• Handle the glass carefully; lift straight up/out from the tracks or supports and slide the replacement into position
• If the cover uses plastic clips or rails, inspect and replace damaged hardware to ensure a secure fit

This electronic control board regulates refrigerator functions like temperature, defrost cycles and display/status signaling to keep cooling and user controls operating properly. Replace a failed control board to restore normal electronic control and diagnostics. What it does

• Receives sensor inputs and directs compressor, fans and defrost components
• Manages temperature setpoints and cycles based on thermostat signals
• Controls user interface indicators and electronic readouts
• Can stop operations or cause error codes when the board fails

• 1 control board (main electronic control)

• Disconnect power before service to avoid electrical shock or damage
• Handle circuit board by edges and avoid touching components or connector pins
• Verify connectors and mounting are secure; match connectors before reapplying power

This genuine replacement spring provides the tension for the refrigerator water/filter release rod so the filter stays secured and releases correctly. Restores proper filter engagement for smooth insert and removal. What it does:

• Applies tension to the filter release rod so the filter locks and ejects reliably
• Helps prevent the filter from slipping or failing to latch
• Reduces binding or sticking when inserting or removing the filter
• Works with the filter housing release mechanism to maintain normal operation

• One filter release rod spring

• Disconnect power to the appliance before servicing; shut off water if accessing the water/filter area
• Remove the filter housing cover per your model's service instructions to access the spring
• Springs can be under tension—wear eye protection and handle carefully