Parts for Electrolux EI28BS80KS2: 09 - Shelves Parts

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

Supports and secures refrigerator shelves at the correct height. Replace if your bracket is cracked, broken, or missing to restore proper shelf alignment.

Glass shelf for refrigerator interior. Installs on shelf brackets to hold food items. Replace if cracked, chipped, or broken for safe food storage.

Wiring harness that connects electrical components inside your refrigerator. Replace if wires are damaged, connectors are broken, or insulation is worn.

This wiring harness routes power and control signals between the appliance control board and its components so the unit can operate reliably. It replaces a damaged or faulty harness to restore proper electrical connections. What it does:

• Carries power and control signals to motors, valves, sensors and other components
• Provides factory-style connectors for secure, vibration-resistant connections
• Helps prevent intermittent operation caused by frayed wires or loose terminals
• Can resolve no-start conditions, random shutdowns, or communication error symptoms

• One complete wiring harness with factory-style connectors

• Disconnect power to the appliance before beginning any work
• Inspect connectors and wire routing; match connector shapes and pin counts before installing
• Secure harness away from hot surfaces, sharp edges and moving parts to prevent wear

Replacement crisper pan drawer for your refrigerator. Installs in the fresh food compartment to hold vegetables and fruits. Needed when cracked or broken.

Replace your cracked or broken refrigerator crisper glass shelf. This clear glass panel covers the crisper drawer to protect produce and maintain freshness.

Metal or plastic channel that mounts and aligns refrigerator shelves or door bins. Replace if cracked, broken, or no longer securing shelves properly.

This shelf mounting channel is a replacement support rail that secures refrigerator shelves and helps keep glass or wire shelving aligned for stable storage. It restores proper shelf seating and prevents shelves from shifting or tilting. What it does

• Provides a stable mounting surface for a refrigerator shelf to sit on and lock into place
• Keeps shelves level so items don't slide or tip
• Replaces worn, bent, or broken shelf support channels that cause shelf misalignment
• Works with compatible shelf assemblies to restore intended shelf function

• One shelf mounting channel

• Remove power and empty shelf area before servicing to prevent injury or damage
• Typically snaps or screws into place on the refrigerator liner; reuse existing fasteners when possible
• Compare the new channel to the old part before installation

Shelf mounting channel for bottom-mount refrigerators. Secures and supports shelves inside the fresh food compartment. Replace if cracked or broken.

Replaces worn deli drawer slide to restore smooth, soft-close operation. Install when drawer sticks, drags, or slams shut. Confirm fit with your model.

Sliding cover for refrigerator crisper drawer. Replaces cracked, broken, or worn cover that no longer glides smoothly. Fits into crisper opening above drawer.

Secures panels, trim, and brackets inside your refrigerator. Replace this #8-18 x 3/8 screw if the original is missing, stripped, or worn.

Molded plastic mounting bracket that secures and stabilizes refrigerator components. Replaces broken, cracked, or missing brackets to keep parts aligned.

Seals water filter housing to prevent leaks in your refrigerator. Replace if filter leaks onto shelves or drips. Confirm fit with your model number.

Replaces a broken or worn filter release button on your refrigerator. Installs on the filter housing to restore one-handed filter removal and replacement.

Secures the water filter and connects it to the supply line. Replace if your filter leaks, pops out, or won't stay seated. Verify fit with your model number.

Refrigerator not cooling or display blank? This electronic control board regulates temperature and functions. Moderate DIY repair for side-by-side models.

Genuine mounting screw secures panels, brackets, and components inside your refrigerator. Replace missing, stripped, or damaged screws to stop rattling.

Restores the finished edge around your refrigerator crisper cover for a clean appearance and proper seating. Replaces damaged, cracked, or missing trim.

This beam-style crisper cover is the glass shelf that sits above the crisper drawer, providing a flat support surface and helping contain spills while keeping produce organized. It restores the shelf surface and proper crisper function. What it does:

• Replaces a broken or missing crisper cover to restore a stable shelf over the crisper drawer
• Helps contain spills and prevents items from falling into the crisper
• Supports produce and other refrigerated items above the drawer area
• Works with the refrigerator's crisper beam/track system to maintain proper clearance and operation

• One crisper cover (beam-style) as shown

• Always unplug the refrigerator or shut off power before servicing interior components
• Remove food and any items from the shelf area before installation
• Handle the glass carefully; lift straight up/out from the tracks or supports and slide the replacement into position
• If the cover uses plastic clips or rails, inspect and replace damaged hardware to ensure a secure fit

Refrigerator not cooling or display blank? This electronic control board regulates temperature, defrost cycles, and diagnostics to restore normal operation.

Replacement spring for refrigerator water filter release rod. Restores tension so filter stays secured and releases smoothly. Needed when broken or worn.