Parts for Electrolux EI28BS80KS2: 03 - Freezer Drawer, Baskets Parts

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

NOTE - Due to manufacturer changes gasket is only available in light grey and may differ from the photo shown.

Replacement storage drawer for your refrigerator. Installs in fresh food or freezer compartment. Needed when original drawer is cracked or broken.

Replace your broken or cracked refrigerator door handle. This exterior handle installs on the door to provide a grip for opening and closing your unit.

Mounting screw for refrigerator interior or exterior components. Replace if missing, stripped, or corroded to secure panels, brackets, or parts.

Replacement mounting screw secures trim, brackets, and panels inside your refrigerator. Restores proper fit when original screws are missing or stripped.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Wire freezer basket for bottom-mount refrigerators. Organizes frozen foods in a removable bin. Replace if your basket is cracked, broken, or missing.

This lower basket kit replaces a damaged lower dish rack to support plates, bowls and cookware in the dishwasher and restore proper loading and cleaning. It provides a stable, organized lower rack for everyday dishwashing. What it does

• Holds and separates dishes, bowls and cookware in the dishwasher's lower cavity for thorough washing.
• Restores proper rack alignment and stability when tines are bent or sections are damaged.
• Replaces worn or missing lower rack components that cause noisy rolling or improper drainage.
• Helps prevent dishes from contacting the spray arm or each other during wash cycles.

• One lower basket kit.

• Remove power and empty the dishwasher before replacing the rack.
• Slide out the old lower rack and set the new kit into the lower track; wheels/tines typically snap into place.
• Inspect for sharp edges or rust; replace the kit if structural corrosion is present.

Replacement clip secures refrigerator storage baskets in place. Needed when the original clip is cracked, broken, or missing, causing baskets to shift.

Restores smooth drawer movement in your refrigerator. Replace worn, cracked, or broken slide assembly when drawer sticks, sags, or loses alignment.

Supports and guides refrigerator shelves and drawers for smooth sliding. Replace when drawers stick, wobble, or won't glide properly. Verify fit with model.

Mounting clip that secures internal panels and trim in your refrigerator. Replaces broken, cracked, or missing retainers that cause loose or rattling parts.

Replacement drive gear for bottom-mount refrigerators. Restores smooth motion transfer between internal components. Order when original is cracked or worn.

Secures items on your refrigerator door shelf, preventing bottles and containers from sliding out. Replace when cracked, broken, or missing.

Drawer slide assembly for refrigerators. Installs on drawer or shelf to enable smooth gliding motion. Replace if cracked, broken, or causing drawers to stick.

Shelf divider that separates and organizes items inside your refrigerator. Installs on shelves or in drawers. Replace if cracked, warped, or missing.

Plastic shelf divider that organizes items in your refrigerator compartment. Replace if cracked, broken, or missing to restore proper food separation.

Interior divider that separates and organizes items on refrigerator shelves or inside drawers. Replaces cracked, broken, or missing dividers.

Structural cabinet brace that stabilizes your refrigerator's interior frame. Replace if cracked, bent, or broken to restore proper alignment of doors.

Structural rail that supports refrigerator shelves and pantry drawer assemblies. Replace if cracked, broken, or missing to restore level support.

Replacement door handle bar for your refrigerator. Installs on the door to provide a sturdy grip. Needed when original is loose, cracked, or damaged.

Tilt-out door rack for refrigerator that holds small items with forward-tilting access. Replace if cracked, broken, or no longer secures items properly.

Secures and supports the freezer drawer in your refrigerator, keeping it aligned and stable. Replace this bracket if yours is broken, cracked, or worn.

Support bar for refrigerator freezer drawer assembly. Installs between roller tracks to stabilize drawer and prevent shifting. Replace if broken or missing.

Plastic end cap that covers the end of refrigerator shelf support bars. Replace if cracked, broken, or missing to restore a finished look.

Door rack end cap for refrigerators. Installs on the end of door storage racks to secure and finish the assembly. Replace if cracked, broken, or missing.

Internal lever that connects the dispenser paddle to the switch mechanism in your refrigerator door. Replace if broken, cracked, or missing for firm paddle.

Replaces a cracked, broken, or missing water dispenser paddle actuator on your refrigerator door. Installs in the dispenser housing control area.

Controls airflow between refrigerator compartments by operating the air damper door. Replace if damper is stuck, broken, or fails to regulate temperature.

Replaces worn, cracked, or missing basket trim on refrigerator baskets. Restores the finished edge and secure fit to prevent rubbing and damage.

3/32" blade screwdriver for accessing and adjusting small screws on appliance control panels and trim. Essential for maintenance and repairs.

Lock pin that secures refrigerator drawers and shelves in place. Replace if the pin is broken, missing, or won't hold drawer components securely anymore.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances

Mounting screw for refrigerator panels, handles, and internal components. Replace stripped, corroded, or missing screws to secure assemblies properly.

Rubber door bumper cushions refrigerator door closure to reduce noise and protect cabinet finish. Replace if cracked, missing, or worn from repeated use.

Replace a stripped, missing, or damaged set screw that secures refrigerator or freezer door handles. Requires 3/32" allen wrench for installation.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.