Parts for Frigidaire DGHS2644KF2: 09 - Shelves Parts

The Water Filter is an OEM replacement part for Frigidaire refrigerators. This PureSource Ultra Ultrawf Refrigerator Water Filter is designed to provide superior filtration, ensuring that your water and ice are clean and refreshing.

With the Frigidaire Refrigerator Water Filter, you can enjoy up to six months of crystal-clear water and ice. For the filter bypass, order part number 242294402. Get the most out of your Frigidaire appliance with a new OEM water filter, and enjoy clean, refreshing water and ice every time!

Causes of a bad part:

• Overused or expired
• Clogged by excessive impurities

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Lower Freezer Shelf is an OEM replacement part for Frigidaire refrigerators. It provides storage space for frozen items in the lower section of the freezer. The shelf is engineered with reinforced edges and a non-slip surface to securely hold items without bending or cracking under weight. This shelf measures approximately 11.75" X 14.25 inches.

Causes of a bad lower freezer shelf can include wear and tear from regular use, heavy loads causing the shelf to bend or break, or accidental damage from mishandling or impact.

Symptoms of a bad lower freezer shelf include:

• The shelf sagging or not supporting weight properly
• Visible cracks or breaks in the shelf
• Difficulty fitting the shelf securely in place
• Reduced storage capacity due to damage

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models

The Upper Freezer Shelf is an OEM part for Frigidaire refrigerators. It provides additional storage space within the freezer compartment, allowing for better organization and more efficient use of the available space. This shelf fits securely in the upper section of the freezer, helping to separate and support various frozen items.

Common causes of a bad freezer shelf include heavy loads that cause cracking or breaking, warping from prolonged exposure to cold temperatures, or accidental impact.

Symptoms of a bad upper freezer shelf include:

• Visible cracks or breaks in the shelf
• The shelf not fitting securely in its designated slots
• Difficulty organizing or storing items due to an unstable shelf
• The shelf sagging under weight

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator, making it easier to see and access food items.

Causes of a bad LED light bulb can include burnout from prolonged use, electrical surges, or damage from physical impact. Additionally, issues with the bulb's connection or internal circuitry can result in malfunction.

Symptoms of a bad LED light bulb include:

• The refrigerator interior remaining dark when the door is opened
• Flickering or dim light
• Intermittent lighting
• Complete failure to light up

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This receptacle is the mating socket for a plug-in refrigerator component, providing a secure connection for reliable operation. Replacing a worn or heat-damaged socket restores solid contact and helps prevent intermittent performance.

• Serves as the socket/interface for a plug-in component inside the appliance
• Maintains tight contact for consistent operation and safe connectivity
• Replaces loose, burned, or broken sockets that can cause heat or arcing
• Common symptoms: connected part won't run or is intermittent; loose fit; visible discoloration or melting at the socket

• Disconnect power to the appliance before servicing
• Access the socket location and note/photograph wire orientation
• Transfer wires/terminals one at a time to the new receptacle; ensure full seating
• Inspect the mating plug/harness for heat damage and replace if necessary

This is a refrigerator shelf that provides a sturdy, flat storage surface. Replacing a cracked or missing shelf restores usable space and helps keep items organized and properly supported.

• Supports food items and containers in the freezer compartment
• Helps maintain organized storage and clear airflow
• Replaces damaged, cracked, or missing shelf to restore capacity
• Common symptoms: broken glass, sagging or missing shelf, unstable items

• Unplug the appliance and wear cut-resistant gloves
• Allow the glass to reach room temperature before handling
• Remove any retaining trim/rails, slide out the old shelf, and seat the new panel fully
• Confirm the shelf is level and locked into its supports before loading

The Refrigerator Shelf is an OEM replacement part for Frigidaire side-by-side refrigerators. It is a durable glass surface that provides adjustable storage for various food items within the refrigerator compartment. 

Symptoms of a bad shelf include:  

• Cracks or chips in the glass that can collect bacteria
• Sagging or inability to properly support weight
• Broken mounting clips that cause the shelf to become loose

Causes of a bad shelf are typically normal wear and tear over time from repeated loading/unloading of items. Impact damage or overloading beyond weight limits can also cause failure.

Compatible with some Electrolux, Roper, and KitchenAid models as well, it ensures shelves support refrigerated goods as intended. 

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. It serves as a lid or shelf above the crisper drawers, where fruits and vegetables are stored. This cover helps maintain humidity levels in the crisper compartments, preserving the freshness and extending the life of perishable items. It also provides additional shelving space for other items, enhancing the refrigerator's storage efficiency. The cover measures approximately 19-5/8" x 16-3/8". 

Symptoms of a bad Crisper Pan Cover include:

• Cracks or damage that can impair structural integrity or aesthetics,
• Warping that affects fit and function within the refrigerator,
• Difficulty in sliding or removing the cover, which could indicate size changes due to temperature fluctuations or damage.

Causes of crisper pan cover failure often include physical impact from storing or removing items, environmental stress from cold temperatures, or material fatigue over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

*GLASS NOT INCLUDED, GLASS IS PART # 240350603 / AP2115927*

The Frigidaire Crisper Drawer Cover is an OEM replacement part for Frigidaire model fridges. It measures approximately 17" x 17” and is located covering the bottom crisper drawer.

Causes of needing a new crisper drawer cover can include normal wear and tear over time, accidental damage, or the need to replace an outdated or discolored cover for aesthetic purposes.

Symptoms of a faulty or missing crisper drawer cover include:

• Difficulty maintaining the desired humidity levels in the crisper drawers
• Produce drying out or wilting faster than expected
• Visible signs of cracking, warping, or damage on the existing cover

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

This humidity control is the adjustable slider in the crisper drawer cover that opens and closes the vent to regulate moisture around fruits and vegetables. Replace a cracked or missing control to restore smooth adjustment and consistent crisper conditions.

• Mounts to the crisper cover and links to the vent/damper door
• Slides between settings to increase or reduce airflow for proper crisper humidity
• Typical symptoms: broken or missing lever, slider stuck or loose, vent doesn't move as you adjust, excess condensation or wilting produce

• Disconnect power; remove food, crisper pan, and cover/glass as needed—handle glass carefully
• Release the old control from its slot/retainer and note the vent linkage orientation
• Seat the new control and engage the linkage; confirm full travel and proper vent action
• Reassemble the cover and drawer, then restore power

The Frigidaire Crisper Pan is an OEM replacement part for Frigidaire brand appliances. The crisper pan is used for holding fruits and vegetables in the refrigerator. It is designed to slide in and out for easy access.

Causes of needing to replace the crisper pan include cracking or damage from mishandling, discoloration or staining over time, or issues with the humidity control mechanism.

Symptoms of a faulty crisper pan include:

• Inability to maintain proper humidity levels
• Excessive dryness or wilting of produce
• Cracking, warping, or other physical damage

Color: clear. Note: Due to a factory revision, the new pan does not have the humidity control slide.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lower Crisper Pan is an OEM part for Frigidaire refrigerators. It is designed to store fruits and vegetables at an optimal humidity level, keeping them fresh for a longer period. This pan fits into the lower section of the refrigerator and provides a dedicated space for produce, helping to organize and maximize the storage capacity of your fridge. The pan measures approximately 16.5" x 16.2" x 8". 

You should replace the lower crisper pan if it becomes cracked, broken, or warped. Causes of a bad crisper pan can include regular wear and tear from frequent use, overloading with heavy items, or accidental damage from dropping or mishandling the pan.

Symptoms of a bad lower crisper pan include:

• Cracks or visible damage to the pan
• Difficulty sliding the pan in and out of its compartment
• Reduced ability to maintain proper humidity levels, leading to faster spoilage of produce

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Meat Pan Hanger is an OEM part for Frigidaire refrigerators. It supports the meat pan, allowing it to slide in and out smoothly for easy access to stored items. This hanger ensures the proper positioning and stability of the meat pan within the refrigerator.

Causes of a bad meat pan hanger can include wear and tear from frequent use, accidental impacts, or damage due to overloading the meat pan. A faulty hanger can lead to difficulties in sliding the pan and may affect the organization of the refrigerator.

Symptoms of a bad refrigerator meat pan hanger include:

• The meat pan not sliding smoothly or getting stuck
• Visible cracks or breaks in the hanger
• The meat pan tilting or becoming misaligned
• Difficulty in maintaining the position of the meat pan

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Meat Pan Hanger, Right Side is an OEM part for Frigidaire refrigerators. It is specifically designed to support the meat pan on the right side, ensuring it hangs securely and slides smoothly when accessed. This component is crucial for maintaining the structural integrity of the refrigerator's internal organization, allowing for efficient storage and easy access to meats and other perishables.

Symptoms of a bad Refrigerator Meat Pan Hanger include:

• The meat pan drooping or not holding in place,
• Difficulty in sliding the pan in or out,
• Visible damage or breakage of the hanger.

Causes of meat pan hanger failure typically involve excessive weight in the pan, frequent and forceful use, or physical impacts that could weaken or break the hanger.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. This part provides a stable and flat surface above the crisper drawers while also contributing to the overall organization and functionality of the refrigerator's interior. 

Causes of a bad Crisper Pan Cover can range from accidental damage, such as dropping heavy items on the cover, to normal wear and tear over time. 

Symptoms of a bad Crisper Pan Cover include:

• Cracks or breaks in the glass or plastic panel, which can compromise the structural integrity and appearance of the refrigerator.
• Warping or damage to the frame, making it difficult to fit the cover properly in place or affecting its ability to support weight.
• Difficulty sliding or removing the crisper drawers beneath the cover, possibly due to misalignment or damage to the cover.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Crisper Glass Insert is an OEM part for Frigidaire refrigerators, designed to fit over the crisper drawers. This glass insert provides a sturdy and flat surface for storing fruits, vegetables, and other items in the refrigerator's crisper section, helping to maintain optimal humidity levels and keep produce fresh longer. The glass measures approximately 17.12 inches X 15.40 inches.

Symptoms of a failing Crisper Glass Insert include:

• Cracks or chips in the glass
• Difficulty fitting the glass properly due to damage
• Excessive scratching that obscures visibility

Causes of a bad Crisper Glass Insert can range from accidental damage, such as dropping heavy items on the glass, to normal wear and tear over time. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lower Freezer Basket is an OEM part for Frigidaire refrigerators. It is designed to provide organized storage space within the freezer compartment, allowing you to efficiently separate and access frozen goods. This basket fits at the lower section of the freezer, maximizing storage capacity and ease of use.

Causes of a bad lower freezer basket can include wear and tear over time, damage from heavy or sharp items, or warping due to temperature fluctuations. 

Symptoms of a bad lower freezer basket include:

• Difficulty sliding the basket in and out
• Cracks or breaks in the basket
• Warped or misshapen basket
• Items falling through or getting stuck in damaged sections

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Hanger is an OEM part for Frigidaire freezers. This component is designed to support the freezer basket, ensuring it stays securely in place, allowing for organized storage and easy access to frozen items.

You should replace the freezer basket hanger if it becomes damaged or fails to hold the basket properly. Causes of a bad freezer basket hanger can include regular wear and tear from frequent use, accidental impacts, or exposure to heavy loads that exceed its design specifications.

Symptoms of a bad freezer basket hanger include:

• The freezer basket not staying in place
• Difficulty in sliding the basket in and out
• Visible cracks or breaks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.

Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.

Symptoms of a bad freezer basket hanger include:

• Freezer basket not staying in place
• Difficulty sliding the basket in and out
• Freezer basket sagging or tilting
• Visible damage or cracks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Meat Pan is an OEM part for Frigidaire refrigerators, designed to offer a specialized storage solution within the fridge for meats and other perishables. This drawer helps to keep meats at the appropriate temperature, reducing the risk of spoilage and maintaining freshness longer. 

Causes of a bad Meat Pan can include overloading it with too much weight, accidental damage from dropping or harsh handling, and the natural wear and tear that comes from regular use. 

Symptoms of a bad Meat Pan include:

• Cracks or damage to the pan, which can lead to leaks or difficulties in keeping the contents properly chilled.
• Difficulty in sliding the pan in and out, possibly due to damage or warping.
• A noticeable decrease in the freshness of stored meats, which could be a sign that the pan is not maintaining the correct environment.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This refrigerator water tank (reservoir) stores and chills drinking water inside the fresh food compartment, helping deliver a steady, reliable stream to the dispenser. Replace a cracked or leaking tank to stop interior leaks and restore dispenser performance.

• Stores a small volume of drinking water so it's cooled before dispensing
• Helps maintain consistent dispenser flow by buffering line pressure
• A cracked tank can leak water inside the fresh food section, often under the crisper drawers
• A restricted or frozen tank can cause little or no water, or sputtering, from the dispenser

• Unplug the refrigerator and shut off the household water supply; depressurize by dispensing water
• Access the tank, typically behind the lower crisper drawers in the fresh food section; place towels to catch residual water
• Reconnect existing water lines using push-to-connect fittings; cut tubing square and fully seat it
• Restore water and power, check for leaks at all connections, and flush the water system thoroughly

This is a factory replacement screw fastener used to secure components in your appliance. It restores a tight, rattle-free fit for panels, brackets, and trim when an original screw is missing, stripped, or corroded.

• Secures panels, brackets, and trim to the appliance cabinet or liner
• Replaces a missing, stripped, or rusty screw
• Helps eliminate looseness, vibration, or rattling components
• Maintains proper alignment and a clean, factory fit

• Unplug the appliance before servicing; if near water lines, shut off the supply
• Match to the original and install in the same location/orientation
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Keep and reuse any original washers or spacers if present

This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.

• Fastens the designated component to the appliance cabinet or assembly
• Helps reduce looseness, vibration, and rattling
• Replaces missing, corroded, or stripped screws
• Supports proper alignment of panels, trim, and brackets

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to the original location; retain any reusable clips or washers
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten into plastic or thin metal

Right hand side. For the left hand side order 241674401

Left hand side. For the right hand side order 241674402

This small clip secures the crisper cover's slide so it stays aligned and operates smoothly. Replacing a broken or missing clip restores proper slide action and helps keep your crisper cover assembly functioning as designed.

• Holds the crisper cover slide in place and aligned with its track
• Helps the slide move smoothly without popping off or binding
• Common symptoms: slide is loose or falls out, won't stay in place, cracked/missing clip
• Visual damage or loss can leave the crisper drawer cover slide inoperable

• Disconnect power and remove food items for safe access
• Remove the crisper drawer and lift out the crisper cover assembly
• Release the damaged clip and snap the new clip into the cover/slide as oriented
• Reassemble and verify the slide moves freely end to end

This clip mounts to the refrigerator liner and secures the crisper cover/slide rail so the drawer stays supported and glides properly. Replace a broken or missing clip to restore alignment and smooth operation of the crisper.

• Holds the crisper cover/slide rail firmly against the cabinet liner
• Supports the crisper drawer to prevent sagging or tilt
• Helps restore smooth opening and closing of the crisper drawer
• Common symptoms of failure: loose rail, drawer off-track, difficulty sliding, or a cracked/missing clip

• Unplug the refrigerator or disconnect power before servicing
• Remove the crisper drawer and cover/glass to access the clip
• Release the old clip (snap tabs or screw), align and secure the new clip; reuse the original fastener if your model uses one
• Reinstall the cover and drawer; the drawer slides freely