Parts for Frigidaire FFSS26D8RS0: 05 - Shelves Parts

This Frigidaire Refrigerator Water Filter is an OEM replacement part for select Frigidaire brand refrigerators with a slide-out cartridge in the front compartment. Your refrigerator water filter reduces the chorine taste and odor from your water. It also effectively helps filter out sediment, including dirt, sand, and rust,

The filter is easy to install without the need for special tools and should be changed every 6 months. With an operating temperature range of 33-100°F and a pressure range of 30-100 PSI, this OEM part offers reliable performance. The filter measures approximately 6-3/4" x 5-1/4" x 2-1/4" and features a high-grade coconut carbon filter media. 

For filter bypass order 242227702.

This pizza shelf is a direct-replacement oven shelf designed to support pizzas and other flat bakeware for stable, even cooking. Restores a missing or damaged shelf so trays and pans sit level during use. What it does:

• Provides a flat, stable surface for baking pizzas, sheet pans, and similar items
• Replaces a warped, bent or missing pizza shelf that prevents level cooking
• Helps keep cookware centered and supported to reduce sliding or tipping
• Durable finish resists everyday oven use and helps maintain even heat exposure

• Slide shelf onto existing oven rack supports until it sits securely; no tools typically required
• Allow oven to cool before removing or installing the shelf to avoid burns
• Clean with non-abrasive cleaners; avoid harsh scrubbing that can damage the finish
• Follow your oven manufacturer's instructions for safe use and placement

The Glass Shelf is an OEM part for Frigidaire refrigerators. This component provides a stable and durable surface for storing food items within the refrigerator, helping to organize the storage space efficiently. The glass measures approximately 16” by 11.25”.

Over time, the glass shelf can become damaged due to heavy items being placed on it, accidental impacts, or thermal stress from temperature changes. Replacing a damaged shelf ensures safe and effective storage inside the refrigerator.

Symptoms of a bad glass shelf include:

• Cracks or breaks in the glass
• The shelf not fitting securely or wobbling
• Difficulty in cleaning due to damage
• Potential for food items to fall due to an unstable surface

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Lower-position freezer glass shelf that restores a flat, sturdy surface for organizing frozen foods. Ideal replacement when the original shelf is cracked, broken, or missing, helping contain small spills and maintain usable storage space.

• Provides the lower freezer storage surface and supports containers evenly
• Helps contain drips to keep the compartment cleaner
• Replaces cracked, chipped, or shattered glass to eliminate unsafe edges
• Restores lost storage capacity and improves organization

• Unplug the refrigerator and clear the area before handling glass
• Allow the part to reach room temperature to avoid sudden temperature changes
• Wear gloves and handle edges carefully
• Install into the lower shelf supports per your model; do not force

Lower-position freezer glass shelf that restores a flat, sturdy surface for organizing frozen foods. Ideal replacement when the original shelf is cracked, broken, or missing, helping contain small spills and maintain usable storage space.

• Provides the lower freezer storage surface and supports containers evenly
• Helps contain drips to keep the compartment cleaner
• Replaces cracked, chipped, or shattered glass to eliminate unsafe edges
• Restores lost storage capacity and improves organization

• Unplug the refrigerator and clear the area before handling glass
• Allow the part to reach room temperature to avoid sudden temperature changes
• Wear gloves and handle edges carefully
• Install into the lower shelf supports per your model; do not force

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator, making it easier to see and access food items.

Causes of a bad LED light bulb can include burnout from prolonged use, electrical surges, or damage from physical impact. Additionally, issues with the bulb's connection or internal circuitry can result in malfunction.

Symptoms of a bad LED light bulb include:

• The refrigerator interior remaining dark when the door is opened
• Flickering or dim light
• Intermittent lighting
• Complete failure to light up

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Replacement refrigerator interior light socket that secures the interior lamp and connects it to the cabinet wiring, restoring reliable interior illumination. Use this when the light fails to come on, flickers, or the bulb sits loosely. What it does:

• Holds the interior lamp and provides the electrical connection for lighting
• Restores consistent contact to prevent flicker or intermittent operation
• Common repair for a light that won't turn on or a bulb that won't stay seated
• Fits into the interior housing to maintain proper lamp alignment

• Disconnect power to the appliance before inspecting or replacing the socket
• Remove the bulb before swapping the socket to avoid breakage or shock
• Inspect wiring and connectors for damage; replace if wiring is frayed
• Avoid getting the socket wet and use only the correct bulb type and wattage specified by the appliance

The Light Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding the light bulb in place and providing the electrical connection needed to illuminate the refrigerator's interior. This ensures visibility inside the refrigerator, helping you easily find and access your stored food items.

Causes of a bad light socket can include electrical malfunctions, wear and tear over time, or damage due to bulb replacements or impact.

Symptoms of a bad light socket include:

• The refrigerator light not turning on
• Flickering or dim light
• Visible damage to the socket
• Electrical sparking or unusual noises when the light is on

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is a refrigerator shelf that provides a sturdy, flat storage surface. Replacing a cracked or missing shelf restores usable space and helps keep items organized and properly supported.

• Supports food items and containers in the freezer compartment
• Helps maintain organized storage and clear airflow
• Replaces damaged, cracked, or missing shelf to restore capacity
• Common symptoms: broken glass, sagging or missing shelf, unstable items

• Unplug the appliance and wear cut-resistant gloves
• Allow the glass to reach room temperature before handling
• Remove any retaining trim/rails, slide out the old shelf, and seat the new panel fully
• Confirm the shelf is level and locked into its supports before loading

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. It serves as a lid or shelf above the crisper drawers, where fruits and vegetables are stored. This cover helps maintain humidity levels in the crisper compartments, preserving the freshness and extending the life of perishable items. It also provides additional shelving space for other items, enhancing the refrigerator's storage efficiency. The cover measures approximately 19-5/8" x 16-3/8". 

Symptoms of a bad Crisper Pan Cover include:

• Cracks or damage that can impair structural integrity or aesthetics,
• Warping that affects fit and function within the refrigerator,
• Difficulty in sliding or removing the cover, which could indicate size changes due to temperature fluctuations or damage.

Causes of crisper pan cover failure often include physical impact from storing or removing items, environmental stress from cold temperatures, or material fatigue over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

*GLASS NOT INCLUDED, GLASS IS PART # 240350603 / AP2115927*

The Frigidaire Crisper Drawer Cover is an OEM replacement part for Frigidaire model fridges. It measures approximately 17" x 17” and is located covering the bottom crisper drawer.

Causes of needing a new crisper drawer cover can include normal wear and tear over time, accidental damage, or the need to replace an outdated or discolored cover for aesthetic purposes.

Symptoms of a faulty or missing crisper drawer cover include:

• Difficulty maintaining the desired humidity levels in the crisper drawers
• Produce drying out or wilting faster than expected
• Visible signs of cracking, warping, or damage on the existing cover

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Frigidaire Crisper Pan is an OEM replacement part for Frigidaire brand appliances. The crisper pan is used for holding fruits and vegetables in the refrigerator. It is designed to slide in and out for easy access.

Causes of needing to replace the crisper pan include cracking or damage from mishandling, discoloration or staining over time, or issues with the humidity control mechanism.

Symptoms of a faulty crisper pan include:

• Inability to maintain proper humidity levels
• Excessive dryness or wilting of produce
• Cracking, warping, or other physical damage

Color: clear. Note: Due to a factory revision, the new pan does not have the humidity control slide.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This humidity control is the adjustable slider in the crisper drawer cover that opens and closes the vent to regulate moisture around fruits and vegetables. Replace a cracked or missing control to restore smooth adjustment and consistent crisper conditions.

• Mounts to the crisper cover and links to the vent/damper door
• Slides between settings to increase or reduce airflow for proper crisper humidity
• Typical symptoms: broken or missing lever, slider stuck or loose, vent doesn't move as you adjust, excess condensation or wilting produce

• Disconnect power; remove food, crisper pan, and cover/glass as needed—handle glass carefully
• Release the old control from its slot/retainer and note the vent linkage orientation
• Seat the new control and engage the linkage; confirm full travel and proper vent action
• Reassemble the cover and drawer, then restore power

The Crisper Pan is an OEM part for Frigidaire refrigerators. This pan is designed to store fruits and vegetables at an optimal humidity level, helping to keep them fresh for longer periods. It slides easily in and out of the refrigerator compartment, allowing for convenient access and organization of produce. The drawer measures approximately 15 inches in width and extends about 16 inches from front to back. Please note that due to a factory revision, the new version of this crisper drawer does not feature a humidity control slide. 

You should replace the crisper pan if it becomes cracked, broken, or difficult to slide. Causes of a bad crisper pan can include overloading, dropping, or general wear and tear over time. Damage to the crisper pan can lead to reduced functionality and improper storage conditions for your produce.

Symptoms of a bad crisper pan include:

• Cracks or breaks in the plastic
• Difficulty in sliding the pan in or out
•  Reduced storage capacity due to damage
• Food not staying fresh as long

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This front shelf trim replaces a damaged or missing front edge on your refrigerator shelf. It restores a secure, finished lip that supports the shelf and helps keep items and small spills from sliding out.

• Attaches to the front edge of the shelf to provide a finished lip and added support
• Helps contain minor spills and prevents items from sliding off the shelf
• Resolves issues like cracked, warped, or missing trim and a loose or unstable shelf edge
• Common symptoms: broken or chipped trim, loose/missing front edge, shelf not seating or holding properly

• Remove food, lift out the shelf, and place it on a flat work surface
• Release the old trim by disengaging tabs and sliding/pulling it off
• Align the new trim with the front edge and press firmly until fully seated
• Handle shelf components carefully; wear protective gloves and disconnect power if working near internal electrical parts

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. This part provides a stable and flat surface above the crisper drawers while also contributing to the overall organization and functionality of the refrigerator's interior. 

Causes of a bad Crisper Pan Cover can range from accidental damage, such as dropping heavy items on the cover, to normal wear and tear over time. 

Symptoms of a bad Crisper Pan Cover include:

• Cracks or breaks in the glass or plastic panel, which can compromise the structural integrity and appearance of the refrigerator.
• Warping or damage to the frame, making it difficult to fit the cover properly in place or affecting its ability to support weight.
• Difficulty sliding or removing the crisper drawers beneath the cover, possibly due to misalignment or damage to the cover.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Crisper Glass Insert is an OEM part for Frigidaire refrigerators, designed to fit over the crisper drawers. This glass insert provides a sturdy and flat surface for storing fruits, vegetables, and other items in the refrigerator's crisper section, helping to maintain optimal humidity levels and keep produce fresh longer. The glass measures approximately 17.12 inches X 15.40 inches.

Symptoms of a failing Crisper Glass Insert include:

• Cracks or chips in the glass
• Difficulty fitting the glass properly due to damage
• Excessive scratching that obscures visibility

Causes of a bad Crisper Glass Insert can range from accidental damage, such as dropping heavy items on the glass, to normal wear and tear over time. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Right side.

The Freezer Basket Hanger is an OEM part for Frigidaire freezers. This component is designed to support the freezer basket, ensuring it stays securely in place, allowing for organized storage and easy access to frozen items.

You should replace the freezer basket hanger if it becomes damaged or fails to hold the basket properly. Causes of a bad freezer basket hanger can include regular wear and tear from frequent use, accidental impacts, or exposure to heavy loads that exceed its design specifications.

Symptoms of a bad freezer basket hanger include:

• The freezer basket not staying in place
• Difficulty in sliding the basket in and out
• Visible cracks or breaks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Left side.

The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.

Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.

Symptoms of a bad freezer basket hanger include:

• Freezer basket not staying in place
• Difficulty sliding the basket in and out
• Freezer basket sagging or tilting
• Visible damage or cracks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This is a factory replacement screw fastener used to secure components in your appliance. It restores a tight, rattle-free fit for panels, brackets, and trim when an original screw is missing, stripped, or corroded.

• Secures panels, brackets, and trim to the appliance cabinet or liner
• Replaces a missing, stripped, or rusty screw
• Helps eliminate looseness, vibration, or rattling components
• Maintains proper alignment and a clean, factory fit

• Unplug the appliance before servicing; if near water lines, shut off the supply
• Match to the original and install in the same location/orientation
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Keep and reuse any original washers or spacers if present

This ice cream shelf is the replacement shelf used in the freezer compartment to restore a stable surface for storing ice cream and similar containers. It helps keep frozen foods organized and prevents items from falling or tipping. What it does:

• Replaces a cracked, warped or missing ice cream shelf to restore usable storage space.
• Provides a flat, stable surface for tubs, cartons and other frozen items.
• Prevents containers from sliding or tipping between freezer compartments.
• Restores original shelf alignment so adjacent shelves and drawers fit properly.

• Remove all contents from the shelf area before installing to avoid spills or injury.
• Slide the shelf into the existing support grooves or brackets until fully seated; no special tools typically required.
• Inspect support rails or clips for damage and replace if worn to ensure a secure fit.
• If the shelf is glass, handle with care and wear gloves to prevent cuts.

This ice cream shelf rail guides and secures the freezer's ice cream shelf so tubs stay level and accessible. It restores proper shelf alignment and prevents sliding or rattling of the ice cream compartment shelf. What it does:

• Holds the ice cream shelf in place so frozen goods stay stable during door movement
• Guides shelf slides to keep the shelf aligned and prevent binding
• Reduces shelf rattling and noise from the ice cream compartment
• Helps restore proper shelf seating after a broken or worn rail

• High-level replacement; remove shelf and slide to access rail mounting points
• Use common hand tools; support shelf while loosening or tightening fasteners
• Disconnect power only if working near electrical components; exercise caution with sharp edges
• If screws or clips are missing or damaged, replace them before final reassembly

This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.

• Fastens the designated component to the appliance cabinet or assembly
• Helps reduce looseness, vibration, and rattling
• Replaces missing, corroded, or stripped screws
• Supports proper alignment of panels, trim, and brackets

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to the original location; retain any reusable clips or washers
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten into plastic or thin metal

Right hand side. For the left hand side order 241674401

Left hand side. For the right hand side order 241674402

This small clip secures the crisper cover's slide so it stays aligned and operates smoothly. Replacing a broken or missing clip restores proper slide action and helps keep your crisper cover assembly functioning as designed.

• Holds the crisper cover slide in place and aligned with its track
• Helps the slide move smoothly without popping off or binding
• Common symptoms: slide is loose or falls out, won't stay in place, cracked/missing clip
• Visual damage or loss can leave the crisper drawer cover slide inoperable

• Disconnect power and remove food items for safe access
• Remove the crisper drawer and lift out the crisper cover assembly
• Release the damaged clip and snap the new clip into the cover/slide as oriented
• Reassemble and verify the slide moves freely end to end

This clip mounts to the refrigerator liner and secures the crisper cover/slide rail so the drawer stays supported and glides properly. Replace a broken or missing clip to restore alignment and smooth operation of the crisper.

• Holds the crisper cover/slide rail firmly against the cabinet liner
• Supports the crisper drawer to prevent sagging or tilt
• Helps restore smooth opening and closing of the crisper drawer
• Common symptoms of failure: loose rail, drawer off-track, difficulty sliding, or a cracked/missing clip

• Unplug the refrigerator or disconnect power before servicing
• Remove the crisper drawer and cover/glass to access the clip
• Release the old clip (snap tabs or screw), align and secure the new clip; reuse the original fastener if your model uses one
• Reinstall the cover and drawer; the drawer slides freely