Parts for Frigidaire FPBS2777RFK: Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Removes contaminants for clean, fresh-tasting water and ice. Replace every 6 months for optimal filtration. Confirm fit with your model number.

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

Replace your refrigerator's cracked, broken, or missing shelf. This shelf installs inside the fresh food compartment to organize and support food items.

Spill-safe shelf for bottom-mount refrigerators. Replaces cracked, broken, or worn shelves that no longer contain spills. Installs inside fridge.

Replace a cracked, chipped, or broken spill-safe glass shelf in your refrigerator. Features raised lip to contain spills and restore usable storage space.

This is the crisper drawer cover assembly that sits on top of the crisper drawers in the refrigerator compartment, featuring a glass insert within a plastic frame. It acts as a shelf while also helping maintain humidity levels in the crisper bins below. Replace this cover if the glass is cracked or shattered, if the frame is broken, or if it no longer sits level on the drawer supports.

Replacement cover panel for bottom-mount refrigerators. Installs to conceal internal components or provide finished appearance. Order if cracked or missing.

Clear plastic crisper drawer that holds produce in your refrigerator's fresh food compartment. Replace if cracked, warped, broken, or missing.

Right side rail that guides and supports the crisper drawer cover in your refrigerator. Replace if cracked, broken, or missing to restore proper function.

Left-hand rail for refrigerator crisper cover. Supports and guides the drawer for smooth sliding. Replace if cracked, broken, or missing roller mount area.

Metal or plastic channel that mounts and aligns refrigerator shelves or door bins. Replace if cracked, broken, or no longer securing shelves properly.

Secures and supports refrigerator shelves at the edge. Replace if yours is bent, cracked, broken, or missing to restore proper shelf alignment and stability.

Replacement mounting rail that supports and secures refrigerator shelves. Install when your shelf channel is cracked, bent, or allows shelves to slide out.

Secures the shelf channel to the refrigerator cabinet to keep shelves level and stable. Replaces broken or worn mounting brackets for proper alignment.

Drawer slide rail for bottom-mount refrigerators. Mounts inside the refrigerator cabinet to support and guide drawers. Replace if cracked or broken.

The crisper drawer is the sliding bin that sits in the lower section of the refrigerator and is designed to maintain slightly higher humidity levels to keep fruits and vegetables fresh longer. Its sealed environment slows moisture loss in your produce. Replace this drawer when it is cracked, the bottom has split, the slides are broken, or it no longer seals properly and your produce is drying out faster than it should.

Carries fresh water between the valve, reservoir, dispenser, and ice maker. Replace if cracked, kinked, or leaking to restore proper water flow.

Replaces broken or missing can dispenser for refrigerator door or shelf. Holds and organizes canned beverages. Snaps or hooks into place for neat storage.

Removes contaminants for clean, fresh-tasting water and ice. Replace every 6 months for optimal filtration. Confirm fit with your model number.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

Connects water filter to refrigerator system for clean water and ice. Replace if leaking, water flow is slow, or filter won't seal properly.

Support bracket for bottom-mount refrigerators. Secures internal components in place. Replace if cracked, broken, or missing to restore proper support.

Replace your refrigerator's ice and water filter housing when you notice leaks, cracks, or improper filter seating. Confirm fit with your model number.

Fix intermittent power loss or component failure with this electrical plug connector. Restores secure wiring harness connections in your refrigerator.

Replacement roller for refrigerator crisper drawer tracks. Installs in drawer glide assembly. Replace when cracked, broken, or worn to restore smooth drawer operation.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Small retainer clip that secures components, panels, tubes, or wires in place inside your refrigerator. Replace when worn, broken, or missing to restore fit.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head