Parts for Frigidaire FPHI2188PF0: 07 - Shelves Parts

This is a plastic cover that attaches to the left-side hanger bracket of a wire freezer basket. It conceals and protects the basket hanger mechanism inside the freezer compartment. Replace this cover if it is cracked, broken, or missing, which can cause the freezer basket to sit unevenly or become difficult to slide.

Replacement shelf frame for your refrigerator. Installs inside the fresh food compartment to support shelving. Needed when original is cracked or broken.

Uneven cooling or warm spots in your fridge? This top air diffuser directs cold airflow to maintain consistent temperatures. Simple DIY repair.

Warm spots in lower fridge? This bottom air diffuser directs cold air to maintain even temperatures. Simple snap-in installation restores airflow.

Refrigerator interior light won't turn on or stays on? This door light switch controls your fridge lighting. Quick DIY fix with basic tools.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Refrigerator light not working? This interior light socket restores bulb connection when cracked or loose. Quick 5-minute DIY fix for dark compartments.

Houses and protects electronic controls and wiring in your refrigerator. Replace if cracked, broken, or drain tube connection damaged causing water leaks.

Replace a cracked, broken, or missing temperature control knob on your refrigerator. Installs on the control shaft to restore accurate temperature selection.

Refrigerator not cooling or freezing? A faulty temperature control thermostat causes inadequate cooling. DIY repair in 5-10 minutes with basic tools.

This is a 31-inch plastic tube that serves as a protective sleeve for the temperature sensor inside the refrigerator compartment. It houses and shields the sensor probe, helping ensure accurate temperature readings. Replace this tube if it is cracked, broken, or damaged, which can lead to inaccurate temperature regulation and inconsistent cooling.

Excessive ice buildup in freezer or warm fridge? This defrost timer controls the defrost cycle. DIY-friendly repair with basic tools in under 30 minutes.

Replacement glass shelf for refrigerator interior. Restores cracked, broken, or missing shelving. Provides sturdy, easy-to-clean surface for food storage.

Replace a cracked, broken, or missing glass shelf in your refrigerator. Features raised edges to contain spills and prevent drips to lower compartments.

Structural rail that supports refrigerator shelves and pantry drawer assemblies. Replace if cracked, broken, or missing to restore level support.

Secures the crisper cover slide for smooth, aligned operation. Replace if broken or missing to restore proper drawer function. Confirm fit with your model.

This model-specific refrigerator cover encloses and protects a designated interior area or component. Replacing a cracked, loose, or missing cover restores proper fit and finish and helps maintain intended airflow and safe operation inside the cabinet. What it does

• Shields and encloses the specified compartment to protect internal components from debris and damage
• Helps maintain designed airflow and temperature by properly closing the opening
• Restores a clean, finished look and prevents items from snagging or falling into moving parts
• Common symptoms: cracked or broken cover, loose fit or rattling, visible gaps, or the cover will not stay attached

• 1 cover

• Disconnect power and remove items, shelves, or bins as needed to access the area
• Note fastener type and locations; retain and reuse original hardware
• Align tabs/guides, seat the cover fully, then secure without overtightening
• Restore power and confirm the cover is secure and clear of any fan or moving parts

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. It serves as the shelf that sits above the crisper drawers and supports various items while providing a lid to help maintain the humidity levels necessary to keep fruits and vegetables fresh longer. This cover typically is only the frame and does not include the glass.

Symptoms of a bad Crisper Pan Cover include:

• Cracks or damage to the cover that can compromise its structural integrity
• Warping or bending that affects the fit and function
• Difficulty sliding or fitting the cover properly over the crisper drawers

Causes of a bad crisper pan cover can include overloading the shelf with too much weight, impacts from dropping heavy items, or thermal stress from fluctuations in refrigerator temperatures.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replaces a cracked, broken, or missing drawer pan in your refrigerator's fresh food compartment. Restores organized storage for produce and snacks.

Replacement slide rail for refrigerator drawers and bins. Installs on cabinet side to guide smooth drawer movement. Replace if cracked, worn, or broken.

A replacement shelf trim that restores the front retainer and appearance of a refrigerator door shelf. Replaces cracked, broken, or missing trim to help keep items secure and improve the fridge's look. What it does:

• Secures items on the door shelf by forming the front retainer edge.
• Restores a finished appearance when the original trim is cracked, chipped, or faded.
• Helps prevent small items from sliding forward and falling off the shelf.
• Matches OEM fit and snaps into the existing shelf rail for a clean replacement.

• Empty and remove the door shelf or move items off the shelf before replacing the trim.
• Trim typically snaps into place; gently pry out the old trim and snap the new trim onto the shelf rail.
• No special tools are usually required; use a plastic trim tool to avoid scratching.

Replacement deli-style meat pan tray for refrigerator storage compartment. Restores proper organization when original is cracked, broken, or missing.

Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.

Missing or cracked ice bin? This ice bucket stores ice from your refrigerator's ice maker. Simple pull-out replacement installs in seconds.

Glass insert that sits above crisper drawers in your refrigerator. Replace if cracked, shattered, or broken. Slides directly into the frame holder.

Sliding basket for refrigerator storage compartments. Replaces cracked, broken, or missing baskets. Mounts on drawer tracks for organization.

This is a translucent plastic shield that covers the interior light bulb inside a refrigerator compartment. It diffuses the light evenly and protects the bulb from contact with food items or moisture. Replace this lens cover if it is cracked, yellowed, broken, or missing, which can leave the bulb exposed and reduce interior lighting quality.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Molded plastic mounting bracket that secures and stabilizes refrigerator components. Replaces broken, cracked, or missing brackets to keep parts aligned.

Replaces broken or missing can dispenser for refrigerator door or shelf. Holds and organizes canned beverages. Snaps or hooks into place for neat storage.

Seals the evaporator coil cover to prevent air bypass and direct cold air over coils. Replace if worn or damaged to restore airflow and reduce frost.

This is a replacement mounting screw used to secure the defrost timer assembly to the refrigerator control housing, restoring proper fastening and preventing the timer from shifting or vibrating during operation. What it does:

• Secures the defrost timer to the control housing so the timer stays in position.
• Prevents vibration or movement that can cause intermittent contact or noisy operation.
• Helps maintain reliable defrost cycle timing by keeping the timer properly aligned.
• Addresses symptoms such as a loose or missing fastener, rattling behind the control panel, or a timer that shifts when the door is opened.

• Unplug the appliance before starting work to prevent electrical shock.
• Access the control housing or timer bracket per your model's service instructions.
• Use the correct screwdriver or driver bit; do not overtighten—stop when snug to avoid stripping.
• Retain removed hardware for reference and compare screw length/threads before installing.

Replacement shelf spacer that attaches to wire shelves in your refrigerator or freezer to hold them securely in place. Needed when original is lost or damaged.

Control box wiring harness assembly for refrigerators. Connects control board to components. Replace if wires are damaged, connector is cracked, or harness is worn.