Parts for Kenmore 253.58682891 (25358682891, 253 58682891): Shelves Parts

This basket trim is the replacement edge trim that snaps onto the dishwasher rack to protect dishes and prevent wear along the rack perimeter. It restores a smooth edge and helps keep items from catching or chipping. What it does:

• Covers and protects the exposed metal edge of the dishwasher basket/rack.
• Helps prevent dishes and glassware from chipping or snagging on a rough rack edge.
• Restores a finished appearance to a damaged or missing rack trim.
• Reduces contact noise and wear where dishes meet the rack perimeter.

• Disconnect power to the appliance before beginning any repair work.
• This part typically snaps onto the rack edge; remove the rack for easier access.
• Replace any broken clips or adjacent trim sections to ensure a secure fit.
• If plastic is brittle or rack is heavily corroded, consider replacing adjacent components rather than forcing installation.

Refrigerator pizza shelf that installs inside the fresh food compartment. Replace yours if cracked, broken, or damaged to restore proper storage space.

Complete sliding spill-safe shelf for refrigerator. Replace cracked, broken, or damaged shelves to restore storage and prevent spills from spreading.

Complete sliding spill-safe shelf for refrigerator. Replace cracked, broken, or damaged shelves to restore storage and prevent spills from spreading.

Complete sliding spill-safe shelf for refrigerator. Replace cracked, broken, or damaged shelves to restore storage and prevent spills from spreading.

Sliding damper control for refrigerator crisper drawer. Adjusts airflow and humidity to preserve fruits and vegetables. Replace if broken or missing.

Replace your cracked or broken refrigerator upper crisper pan. This clear produce storage drawer installs on slidable tracks in the fresh food section.

Lower storage pan for refrigerators. Installs in the bottom section to hold produce and perishables. Replace if cracked, broken, or rails damaged.

This is a trim piece that fits along the edge of a freezer shelf inside the refrigerator. It holds the shelf glass or liner securely in place and provides a finished edge to prevent items from sliding off. Replace this trim if it is cracked, broken, or missing, which can cause the shelf to be unstable or allow items to fall through.

Left hand side. For right hand side use 215002401

Right hand side. For left hand side use 215002301

Replacement front panel for refrigerator storage drawer. Restores appearance when original is cracked, chipped, or broken. Snaps into place on bin.

Replacement front panel for refrigerator storage drawer. Restores appearance when original is cracked, chipped, or broken. Snaps into place on bin.

Size: Approx. 15 inches X 16 1/4 inches. This is clear glass

Size: Approx. 15 inches X 16 1/4 inches. This is clear glass

This part has been discontinued and is no longer available.

Right hand side

Left-hand freezer basket track guide rail for refrigerators. Replace broken, cracked, or missing basket hangers to restore proper basket support.

Refrigerator door bin versashelf that mounts inside the door to hold condiments, bottles, or eggs. Replace if cracked, broken, or missing from your unit.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Tank itself is not included in this kit. Kit includes tubing,screws & two John Guess fittings & instructions.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.

• Fastens the designated component to the appliance cabinet or assembly
• Helps reduce looseness, vibration, and rattling
• Replaces missing, corroded, or stripped screws
• Supports proper alignment of panels, trim, and brackets

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to the original location; retain any reusable clips or washers
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten into plastic or thin metal

Left hand side. For the right hand side order 241674402

Right hand side. For the left hand side order 241674401

Replace a loose or missing extension lock washer causing rattling noises or unstable component mounting. Simple DIY fix in under 15 minutes.

Replacement owners manual for your refrigerator. Provides operating instructions, maintenance guidelines, and troubleshooting information for your model.

Size: Approximate 2.5 inches thick, 33 inches wide and 70 inches long.

Hex head screw for securing panels and components in freezers, refrigerators, washers, and dryers. Replace if missing, stripped, or corroded.

Secures cantilever shelves to prevent shifting or slipping. Replace if cracked, broken, or missing to restore stable shelf support. Confirm fit with model.

#10 OD, steel

Size: 60 inches x 1 1/4 inch x 1/32 inch. Used to hold the ice and water dispenser cover in place.

This filter wrench is a ring-style tool used to loosen or tighten a refrigerator's water filter housing or canister. It provides extra leverage to free a stuck filter cup and helps ensure an even, secure reinstallation.

• Provides leverage to loosen a stuck water filter housing/cup
• Assists with secure, even tightening during reinstallation
• Useful when the housing is difficult to turn by hand
• Helpful in tight spaces where hand access is limited

• Turn off the water supply and dispense water to relieve pressure
• Position the wrench around the filter housing/cup; turn counterclockwise to loosen
• After replacing the filter, tighten the housing until snug—do not overtighten
• Restore water supply and check for leaks