Parts for Kenmore 253.7041341A (2537041341A, 253 7041341A): Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

The Crisper Drawer is an OEM part for Frigidaire refrigerators. It provides customizable storage within the refrigerator in the form of removable drawers. The crisper drawers are designed to hold fresh fruits and vegetables in the optimum humidity conditions to maximize freshness and shelf life.

Causes of a bad crisper drawer include broken or missing rails, cracked or chipped drawer bottoms, drawer sides that are warped or misaligned making the drawer difficult to remove or insert smoothly.

Symptoms of a bad crisper drawer include:

• Difficulty opening or closing the drawer
• Drawer not sliding smoothly
• Drawer falling out of position when removing or closing
• Leaks or excess moisture inside the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Shelf Support is an OEM part for Frigidaire refrigerators. This part provides stability and support for refrigerator shelves, ensuring that they remain securely in place and can hold the weight of stored items.

Causes of a bad shelf support can include accidental impacts, overloading the shelves with heavy items, or wear and tear over time. 

Symptoms of a bad shelf support include:

• Shelves that do not stay securely in place
• Sagging or tilting shelves
• Cracks or visible damage on the supports
• Difficulty in adjusting or repositioning shelves

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Shelf Support is an OEM part for Frigidaire refrigerators. Installed at set positions along the side walls, shelf supports provide sturdy surfaces on which to rest adjustable shelves or glass shelves. 

Causes of bad shelf supports can include general wear from repeated loading and unloading of shelves over time, as well as damage from accidental impacts.

Symptoms of bad shelf supports include:

• Shelves that wobble or sag in positions
• Difficulty inserting or removing shelves
• Small dents or breaks in the support surfaces
• Supports that are loosened from wall positions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This inner oven door glass replaces a cracked or cloudy panel and restores a clear view into the oven while helping maintain heat inside the cavity. Fits models that use the original OEM inner door glass panel. What it does

• Replaces damaged or broken inner oven door glass to restore visibility and containment
• Reduces heat loss by restoring the proper door seal and insulation area
• Helps prevent contact with hot oven components when installed correctly
• Useful when glass is cracked, chipped, or severely scratched and affecting appearance or function

• Requires removal of the oven door; for safe disassembly steps
• Handle with care—wear gloves and eye protection to avoid cuts from broken glass
• Inspect door clips, seals, and screws and replace any damaged hardware before reassembly

This shelf channel is the metal/plastic support that secures and aligns a refrigerator shelf or door bin, helping keep stored items stable and properly positioned. It restores proper shelf fit and prevents sagging or misalignment. What it does:

• Provides a secure mounting track for a refrigerator shelf or door bin
• Supports shelf weight to prevent bowing, shifting, or falling
• Keeps the shelf aligned so items sit level and doors close smoothly
• Helps restore original shelf fit after damage or wear

• One shelf channel mounting piece

• High-level replacement; inspect adjacent clips and fasteners and replace if damaged
• Use proper hand tools; avoid overtightening to prevent cracking
• Disconnect power only if working near electrical components; otherwise power removal is not typically required

This shelf channel is the replacement mounting rail that supports and secures a refrigerator shelf, restoring stable shelf alignment and load support. Use it when a shelf slides out of position or the mounting rail is cracked or bent. What it does:

• Provides the mounting surface and guide for a refrigerator glass or wire shelf
• Restores proper shelf alignment and prevents sagging or uneven seating
• Replaces damaged, cracked or bent shelf rails that allow shelves to shift
• Helps maintain safe storage by keeping shelves locked in place during use

• Basic hand tools required; follow the refrigerator's service diagram for exact removal and replacement steps
• Support the shelf when removing the old channel to avoid dropping or damaging the shelf
• Disconnect power (or unplug) the appliance if working near electrical components or lighting
• Replace any fasteners, clips or adjacent trim that are damaged to ensure proper fit and secure mounting

The Water Filter is an OEM component specifically designed for Frigidaire refrigerators with built-in filtration systems. This filter removes contaminants and improves the taste of water distributed through the unit.  

Causes of a bad water filter include scale buildup over time reduced capacity, dried-out media failing to adsorb impurities, or torn casings leaking untreated water.

Symptoms of a bad water filter include:

• Diminished filter life unable to meet Gallon ratings  
• Tests indicating low flow or untreated bacteria/lead  
• Change filter reminders triggering prematurely
• Contaminants detected in ice or dispenser water

Replace yours today with this genuine OEM Frigidaire filter to restore freshness. Compatible with Gibson, Kenmore, and Electrolux models as well, proper filtration sustains appliance performance while satisfying health standards.

This water filter base secures the refrigerator's replaceable water filter cartridge and directs filtered water to the dispenser and icemaker. Replacing a damaged base restores a proper seal and helps prevent leaks and flow interruptions. What it does:

• Holds and seals the water filter cartridge so water passes through the filter media
• Directs filtered water to the dispenser and icemaker plumbing
• Prevents leaks caused by cracked or worn filter housing
• Can resolve low water flow, intermittent dispensing, or water taste issues when base is leaking or not sealing

• One water filter base assembly

• Turn off refrigerator and shut off the water supply before starting
• Relieve system pressure by dispensing water until flow stops, if applicable
• Remove the old housing carefully; inspect O-rings and replace if damaged
• Hand-tighten only; check connections and test for leaks after restoring water and power

This support is the replacement mounting bracket that secures internal components in place to restore proper fit and alignment. It helps stabilize assemblies to reduce noise and prevent sagging or misalignment. What it does:

• Provides a secure mounting point for the appliance component it supports
• Restores proper alignment when original support is cracked, bent, or missing
• Reduces vibration or rattling caused by loose or unsupported parts
• Helps maintain correct spacing to prevent interference with moving parts

• Disconnect power (and water if applicable) before attempting service
• Use appropriate hand tools; avoid excessive force that can damage adjacent parts
• If fasteners are corroded or damaged, replace them with OEM-specified hardware

This support is a factory-style replacement mounting bracket that helps secure internal components and restore proper alignment and stability. Designed to match original fit and function for a precise repair. What it does:

• Provides structural support for internal appliance components to reduce movement and noise
• Restores proper alignment of panels, shelves or assemblies that rely on the bracket
• Helps prevent binding or uneven wear caused by a failed or missing support
• Common symptom: rattling, sagging, misaligned panels or loose internal parts

• One support (mounting bracket) as shown

• Basic hand tools typically required; follow the appliance manufacturer's disassembly instructions
• Disconnect power and/or gas and shut off water (if applicable) before servicing
• Keep all fasteners and orientation of the old part for reference during reassembly

This water filter cover encloses the refrigerator's filter housing for a clean look and protection. Replace a cracked, loose, or missing cover to restore a secure, smooth-opening access door for routine filter changes.

• Covers and protects the water filter in the fresh food compartment
• Opens to provide access when replacing the filter
• Helps prevent items from catching on the filter or housing
• Replace if the cover is cracked, the hinge or latch is broken, it won't stay closed, or it's missing

• Disconnect power and shut off the water supply before servicing
• Open the filter area and release the retaining tabs or hinge pins to remove the old cover
• Transfer any screws or hinge pieces from the original part if required
• Align and snap or secure the new cover; verify smooth opening and closing

This beam-style crisper cover is the glass shelf that sits above the crisper drawer, providing a flat support surface and helping contain spills while keeping produce organized. It restores the shelf surface and proper crisper function. What it does:

• Replaces a broken or missing crisper cover to restore a stable shelf over the crisper drawer
• Helps contain spills and prevents items from falling into the crisper
• Supports produce and other refrigerated items above the drawer area
• Works with the refrigerator's crisper beam/track system to maintain proper clearance and operation

• One crisper cover (beam-style) as shown

• Always unplug the refrigerator or shut off power before servicing interior components
• Remove food and any items from the shelf area before installation
• Handle the glass carefully; lift straight up/out from the tracks or supports and slide the replacement into position
• If the cover uses plastic clips or rails, inspect and replace damaged hardware to ensure a secure fit

This water filter housing is the refrigerator-mounted enclosure that holds and seals the replaceable water filter cartridge, helping ensure proper water flow to the dispenser and icemaker. Fits factory filter systems and restores secure filter seating. What it does:

• Houses and secures the refrigerator water filter cartridge to maintain a sealed water path
• Directs filtered water to the dispenser and icemaker while preventing leaks when installed correctly
• Can help stop water bypass or weak flow caused by damaged or cracked housings
• Supports proper alignment for O-rings and filter locking/engagement

• One water filter housing designed for the factory filter location

• Turn off the refrigerator water supply and dispense any residual water before servicing
• Remove power to the appliance if required by your model and follow manufacturer safety guidance
• Inspect and replace associated O-rings or seals if worn; confirm proper seating to prevent leaks

This refrigerator water filter mount secures the filter head/housing to the liner so the cartridge seats squarely and seals. Replace a cracked or loose mount to restore a snug fit and help prevent leaks or vibration.

• Holds the water filter housing firmly in place
• Aligns the cartridge for proper engagement with the filter head
• Helps maintain a watertight seal at the filter connection
• Common symptoms: filter won't lock in or sits crooked, drips around the filter area, difficulty installing/removing the filter, or rattling from a loose housing

• Disconnect power and shut off the water supply; dispense water to relieve line pressure
• Remove the filter and any cover/trim to access the mount; retain existing screws for reuse
• Install the new mount and tighten screws gently to avoid cracking plastic
• Reinstall the filter, restore water and power, flush the dispenser, and check for leaks

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

This replacement roller restores smooth sliding motion for a refrigerator drawer or bin along its track. Replacing a cracked or worn wheel helps prevent sticking, noise, and uneven movement that can strain rails and bins. What it does:

• Provides the rolling surface for a drawer, bin, or shelf track
• Restores smooth, consistent glide when opening or closing
• Helps reduce grinding/squeaking noises and binding
• Addresses issues like wobbling, tilting, or a missing/cracked wheel

• 1 roller

• Disconnect power before servicing
• Remove the drawer/bin to access the rail and roller
• Note the roller's orientation; transfer any reusable clips or fasteners
• Ensure the wheel spins freely and the drawer glides smoothly before reloading

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This replacement screw secures appliance components to their mounting points so panels, brackets, and trim stay tight and aligned. Replace missing or stripped hardware to restore a solid, rattle-free fit and proper assembly integrity.

• Secures panels, brackets, and trim to prevent movement and maintain alignment
• Replaces missing, damaged, or stripped hardware that can compromise assembly
• Helps reduce rattling or vibration from loose components
• Restores proper fit after service or access panel removal

• Unplug the appliance before servicing; turn off water supply if working near dispenser/ice areas
• Compare the new screw to the original to ensure thread, head style, and length
• Start threading by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Retain and reuse any original washers, spacers, or clips as required

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head