Parts for Kenmore 253.7041341A (2537041341A, 253 7041341A): Freezer Drawer, Baskets Parts

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

NOTE - Due to manufacturer changes gasket is only available in light grey and may differ from the photo shown.

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

NOTE - Due to manufacturer changes gasket is only available in light grey and may differ from the photo shown.

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

NOTE - Due to manufacturer changes gasket is only available in light grey and may differ from the photo shown.

Replacement drawer handle for refrigerator lower drawers. Restores secure grip after original is cracked, broken, or missing. Direct fit installation.

Replace a broken, cracked, or missing refrigerator drawer handle. Restores secure grip and smooth access to your drawer. Direct replacement part.

The Door Handle is an OEM part for Frigidaire refrigerators. It is the surface component grasped and pulled open to access items stored in the bottom freezer.

Causes of a faulty handle can include cracks or breaks in the plastic material, worn friction pads diminishing grip, or damaged attachment components.

Symptoms of a bad freezer door handle include:

• Difficulty opening the freezer door
• Handle easily detaching when pulled
• Inability to keep freezer door securely closed

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Mounting screw for refrigerator interior or exterior components. Replace if missing, stripped, or corroded to secure panels, brackets, or parts.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Single mounting screw secures trim, panels, or brackets inside your refrigerator. Replace lost, stripped, or damaged screws to keep components firmly attached.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

This is a wire or plastic lower basket assembly that slides into the freezer compartment of a refrigerator, providing organized storage for frozen foods. It typically includes the basket frame and any associated mounting hardware. Replace this basket if it is cracked, bent, or has broken rails that prevent it from sliding smoothly in and out of the freezer.

Wire freezer basket for bottom-mount refrigerators. Organizes frozen foods in a removable bin. Replace if your basket is cracked, broken, or missing.

Mounting screw for refrigerator panels, handles, and internal components. Replace stripped, corroded, or missing screws to secure assemblies properly.

This right-hand wire basket slide supports and guides the basket as it opens and closes. Replace it if the basket binds, tilts, or no longer glides smoothly due to a worn, cracked, or broken slide.

• Provides the track for the basket to slide in and out on the right side
• Helps keep the basket aligned and stable within the compartment
• Common symptoms: sticking or uneven travel, basket tilts/drops on one side, visible cracks or damage
• Restores smooth operation and proper support for the wire basket

• Disconnect power and remove the basket and contents before starting
• Remove screws or clips securing the old slide; retain fasteners for reuse
• Align and secure the new slide in the same mounting locations
• Reinstall the basket and verify smooth operation before loading

Drawer slide assembly for refrigerator storage bins. Installs on drawer rails to provide smooth extension and retraction. Replace if cracked or worn.

Replaces worn drawer slide assembly to restore smooth, stable drawer gliding. Replace if drawers stick, misalign, or fall out. Verify fit by model number.

Mounting clip that secures internal panels and trim in your refrigerator. Replaces broken, cracked, or missing retainers that cause loose or rattling parts.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.

Shelf divider that separates and organizes items inside your refrigerator. Installs on shelves or in drawers. Replace if cracked, warped, or missing.

This replacement magnet is used in select refrigerator assemblies. It provides the magnetic hold or sensor trigger required so doors, flaps, or rails stay closed and so the controls can accurately detect when components are in position.

• Supplies magnetic retention in the specified assembly to keep parts closed and aligned
• Activates magnetic reed sensors in models that use them for door/position detection
• Weak or missing magnets can lead to door-ajar alerts, air leaks, or components not staying shut
• Visible damage or incorrect orientation can cause intermittent operation or improper sealing

• Disconnect power before servicing; turn off water if working near the dispenser
• Use your model's parts diagram to locate the magnet and note its orientation/polarity
• Press-fit into its holder carefully; do not chip or crack the magnet
• Verify proper closure/sensing operation before returning the appliance to service

Plastic shelf divider that organizes items in your refrigerator compartment. Replace if cracked, broken, or missing to restore proper food separation.

Shelf divider that separates and organizes items inside your refrigerator. Installs on shelves or in drawers. Replace if cracked, warped, or missing.

Structural cabinet brace that stabilizes your refrigerator's interior frame. Replace if cracked, bent, or broken to restore proper alignment of doors.

Structural rail that supports refrigerator shelves and pantry drawer assemblies. Replace if cracked, broken, or missing to restore level support.

This is a support bar that reinforces and stabilizes a drawer or door shelf inside the refrigerator. It helps keep the drawer properly aligned on its tracks and prevents sagging under the weight of stored items. Replace this part if the drawer tilts, slides unevenly, or if the original support bar is cracked or broken.

Secures and supports the freezer drawer in your refrigerator, keeping it aligned and stable. Replace this bracket if yours is broken, cracked, or worn.

This timing bar is a replacement mechanical link used in the appliance's timing assembly to transfer motion between timer components. It helps restore proper cycle advancement and reliable mechanical timing movement. What it does

• Transfers motion between timer gears and linked components to advance cycles
• Restores consistent mechanical timing action when a worn or broken bar prevents cycle changes
• Commonly replaced when the timer fails to engage or advance smoothly
• Works as a direct-fit replacement for the original timing linkage on compatible units

What's included

• One timing bar (1 count)

Install notes

• Disconnect power before servicing to avoid shock or unexpected motor operation
• Inspect surrounding cams, gears, and mounting hardware; replace any damaged parts for reliable operation
• Handle small components carefully to avoid bending the bar or misaligning timing engagement

Replaces worn, cracked, or missing basket trim on refrigerator baskets. Restores the finished edge and secure fit to prevent rubbing and damage.

Lock pin that secures refrigerator drawers and shelves in place. Replace if the pin is broken, missing, or won't hold drawer components securely anymore.

Mounting screw for refrigerator assembly. Secures components and panels inside your appliance. Replace if screw is stripped, missing, or damaged.

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head