Parts for Kenmore 253.7041341D (2537041341D, 253 7041341D): Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Routes water from the valve to the dispenser and ice maker. Replace if cracked, kinked, or leaking to restore proper flow and prevent water damage.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

This is the crisper drawer cover assembly that sits on top of the crisper drawers in the refrigerator compartment, featuring a glass insert within a plastic frame. It acts as a shelf while also helping maintain humidity levels in the crisper bins below. Replace this cover if the glass is cracked or shattered, if the frame is broken, or if it no longer sits level on the drawer supports.

Replacement cover panel for bottom-mount refrigerators. Installs to conceal internal components or provide finished appearance. Order if cracked or missing.

This is a crisper drawer that slides into the bottom section of the refrigerator compartment to store fruits and vegetables at controlled humidity levels. It helps keep produce fresh by maintaining a separate environment from the rest of the fridge. Replace this drawer if it is cracked, warped, or if the slides are broken and it no longer opens and closes smoothly.

Right side rail that guides and supports the crisper drawer cover in your refrigerator. Replace if cracked, broken, or missing to restore proper function.

Left-hand rail for refrigerator crisper cover. Supports and guides the drawer for smooth sliding. Replace if cracked, broken, or missing roller mount area.

Metal or plastic channel that mounts and aligns refrigerator shelves or door bins. Replace if cracked, broken, or no longer securing shelves properly.

Replacement mounting rail that supports and secures refrigerator shelves. Install when your shelf channel is cracked, bent, or allows shelves to slide out.

Drawer slide rail for bottom-mount refrigerators. Mounts inside the refrigerator cabinet to support and guide drawers. Replace if cracked or broken.

Routes water from the valve to the dispenser and ice maker. Replace if cracked, kinked, or leaking to restore proper flow and prevent water damage.

The Water Filter is an OEM component specifically designed for Frigidaire refrigerators with built-in filtration systems. This filter removes contaminants and improves the taste of water distributed through the unit.  

Causes of a bad water filter include scale buildup over time reduced capacity, dried-out media failing to adsorb impurities, or torn casings leaking untreated water.

Symptoms of a bad water filter include:

• Diminished filter life unable to meet Gallon ratings  
• Tests indicating low flow or untreated bacteria/lead  
• Change filter reminders triggering prematurely
• Contaminants detected in ice or dispenser water

Replace yours today with this genuine OEM Frigidaire filter to restore freshness. Compatible with Gibson, Kenmore, and Electrolux models as well, proper filtration sustains appliance performance while satisfying health standards.

Secures the water filter cartridge and directs filtered water to dispenser and icemaker. Replace if the filter won't lock in place or leaks occur. Verify fit.

Support bracket for bottom-mount refrigerators. Secures internal components in place. Replace if cracked, broken, or missing to restore proper support.

Encloses the water filter housing in your refrigerator's fresh food compartment. Replace this cover if cracked, loose, or missing to restore a secure fit.

Holds and seals the water filter cartridge in your refrigerator. Replace if the filter won't stay seated or if damaged. Confirm fit with your model number.

Secures the water filter housing to your refrigerator liner for proper alignment and sealing. Replace if cracked, loose, or causing leaks. Verify fit.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

Replacement roller for refrigerator crisper drawer tracks. Installs in drawer glide assembly. Replace when cracked, broken, or worn to restore smooth drawer operation.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head