Parts for Poulan PRGT2046B: Steering Assembly Parts

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

This split lock 3/8 washer can be used in a variety of lawn and garden tools. It functions as a component that prevents nuts and bolts from loosening due to vibration when a tool is in use. It’s a split ring with a helical shape, and when fastened together, it exerts a force on the fastener for resistance to motion and increased friction. Typically, this washer is attached on the nut side of a fastener. Over time, the split lock 3/8 washer can start to wear, degrade, or fall apart. This leads to a need for replacement in order to keep the other tool components in the best shape. A flathead screwdriver can be used to pry the washer loose from the bottom or from the split in the washer. Tools needed might include ratchets, wrenches, and a screwdriver. This is a genuine OEM washer known as a 3/8 lock or 3/8 split lock washer and comes as an individual item. It’s gold in color and made out of metal. It can be used for lawnmowers, snowblowers, string trimmers, tillers, wood chippers, and edgers by Husqvarna, Craftsman, Ryobi, Poulan, Weed Eater, Ariens, Murray, and Dixon.

This drive shaft assembly is a replacement part intended for use with lawn tractors. The shaft is made from metal and its purpose is to connect the steering wheel to the machine. If the shaft is damaged or not working properly, owners may find it difficult to turn the tractor properly. This could make using the tractor difficult or even impossible. Whether bent, corroded, or otherwise broken, if this part is damaged, it should be replaced as soon as possible. The replacement is not complicated, and it will require a wrench to complete.This lawn tractor shaft assembly will work with many models of lawn tractors from Husqvarna and Craftsman. The assembly is a high-quality, genuine OEM replacement part that has been sourced directly from the manufacturer. The assembly is sold individually.

This is a brand new steering column flanged bushing for use with different outdoor power equipment. This bearing can be found on the front axle and contributes to the function of the steering system. It is made from plastic and is 25/32 in height with a flange outside diameter of 1 1/8in. A worn bushing can contribute to the excessive wear on the steering gears. Sloppy steering is one of the signs of a worn bushing. Use a wrench to remove or attach this part. This OEM part is sourced from the manufacturer and is sold individually. It works on certain ride mowers from many brands, including Craftsman, Husqvarna, Poulan, and Weed Eater.

This is a genuine replacement flange bearing intended for use on lawnmowers and lawn tractors. The flange bearing is a part located between the rim and tire. Its main function is to secure moving parts while still allowing rotation and guiding movement in the correct direction. The flange bearing is a very high wear part, so it is likely to need replacement. As it wears, the bearing can break, which causes the wheel to wobble and eventually fall off the machine, making it impossible to use. If left untreated, a broken or excessively worn flange bearing can damage multiple parts around it.Replacing the flange bearing is relatively simple. Start by supporting the machine and propping the wheel off the ground. Remove the dust cap and retaining ring. Then remove the tire from the axle, and be sure to notice where the washers are located. Knock the flange bearings free from the rim with a hammer. Then reverse these steps to install the new bearings. Lastly, lubricate the newly installed parts with some grease.This genuine OEM replacement Flange Bearing is sold individually. It is designed to work with several Craftsman and Husqvarna lawn tractors and lawnmowers.

This hex bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is used in multiple applications in outdoor power equipment to connect components, such as attaching the fuel tank to the body of a lawnmower. The hex bolt has a six-sided head that is removed or installed using a hex wrench. Hex bolts can become loosened due to vibration during use and will need to be tightened during regular maintenance. If the bolts are rusted or have fallen out and are lost, replacements can be installed. Always wear gloves when working with equipment. Make sure the equipment has had time to cool down to prevent burns. Locate the part that has a missing or damaged hex bolt. If necessary, remove components that are in the way. Use a hex wrench or box wrench to loosen the bolt that needs to be replaced. Once loosened, the bolt can be manually removed by hand; gripping the sides of the head and turning will unscrew the bolt. Pull the bolt out and insert the one. Screw as far down as possible by hand. Finish tightening using a hex wrench. Do not overtighten.This hex bolt is made of heavy-duty metal and is sold as an individual unit. It is compatible with lawnmowers, lawn tractors, and other machinery manufactured by Husqvarna, Bluebird, Poulan, and Craftsman.