Parts for Husqvarna 917502140: Steering Parts

This steering wheel is an authentic OEM replacement part sourced directly from the manufacturer for use on lawnmowers and lawn tractors. The steering wheel is used to control the direction of the lawnmower or lawn tractor when it is being operated. When the steering wheel is turned, the steering assembly works to move the wheels in the corresponding direction. If the steering wheel is damaged due to normal wear and tear or the elements, it should be removed and replaced with a new one. Take the key out of the ignition and remove the spark plug from the mower. Use a flat head screwdriver to pop the center insert out of the steering wheel. Loosen the locking washer with a wrench. Remove the locking washer and the flat washer underneath it, set those aside. Lift the steering wheel off the steering boot. Place the new steering wheel on the steering boot. Place the large flat washer over the extension shaft and then the locking washer. Tighten the washer and pop the center insert back into place. This steering wheel is made of durable black molded plastic and is sold as an individual unit. This steering wheel is designed for use on lawn mowers and lawn tractors manufactured by Husqvarna and Jonsered.

This is a left-hand weldment spindle that is intended for use with lawn tractors. This part attaches the front wheel to the axle. If this part is damaged, it could cause a range of problems for the tractor. The wheel might stick and not move, which would render the tractor useless. It might also mean that the wheel is unstable or that it wobbles. This could make the tractor inefficient at best and dangerous at worst. If there is damage, replace the weldment right away.The weldment is made from durable metal. It is built to last. However, it may still need to be replaced at some point. If it is bent due to an accident, or if parts of it begin to corrode, replace it.This left-hand weldment spindle replacement will work for certain models of lawn tractors from Husqvarna and Craftsman. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This replacement part is a tractor spindle and is intended for use in a variety of lawn equipment, including tractors. This is a genuine replacement part made by Husqvarna. Spindles are important to many different types of machinery and are responsible for allowing things inside the machine to turn or spin properly. A new spindle might be needed if the user can hear a buzzing or vibrating noise coming from the inside of the machine. This means that the spindle may be damaged and not working properly. It is common that spindles become stripped overtime due to normal wear and tear as they are used very frequently inside the machine. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This metal crownlock nut is found in a range of different types of lawn and garden equipment. The nut is often used to help connect and secure the link on the suspension arm. However, it could be used for different purposes depending on the machine. The crownlock nut may need to be replaced for any number of reasons. In some cases, it could have become corroded and no longer provides a secure connection. It could have also become lost. Regardless, users need to have a replacement to ensure their machine is running properly and that running the machine is safe. This is a genuine OEM replacement crownlock nut and it is sold individually. The nut is commonly used with lawn tractors, lawn mowers, and tillers. Compatible brands include Husqvarna and Craftsman. Buyers should note that there are often many different types of nuts in these machines. They need to be sure they are choosing the right one for their needs and their make and model.

This steering shaft is a genuine Husqvarna replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a steering shaft is to connect the steering wheel to the steering gearbox. This allows the wheels of the small engine appliance to turn smoothly.A steering shaft might have to be replaced in the event that it suffers damage over time; this could be a result of regularly steering through uneven and irregular terrain or of turning the steering wheel too far in either direction too often, which can be overwhelming to the gears. Additionally, a steering shaft might have to be replaced if there is material deterioration over time. If this occurs, a replacement steering shaft part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This steer plate is a genuine Husqvarna part, sold individually. This steer plate can be used as a replacement part in a lawn mower. The purpose of the steer plate in a lawn mower is to affix to the steering rods so that the plate can have free range of motion when the operator steers the lawn mower in various directions.The steer plate in a lawn mower might have to be completely replaced if the steer plate suffers irreparable damage. This damage can take the form of puncturing, scraping, denting, cracking, chipping, warping, or eroding, and if this damage occurs to the point that the steer plate can no longer serve its typical function, the steer plate should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This steer plate is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This steering shaft adapter is a genuine Husqvarna replacement part for lawn mowers and lawn tractors. The function of a steering shaft adapter is to affix the steering shaft to the steering wheel.Steering shaft adapters can suffer damage from general overuse, exposure, or age, which is likely within the lifespan of a tractor or mower; they can also be damaged in the process of trying to reach surrounding parts for maintenance, such as changing the bushings. Damage to the steering shaft adapter might result in the inability of the front wheels to turn properly. If the front wheels are not turning and other simpler remedies are not solving the issue, the steering shaft adapter should be replaced immediately. The lawn tractor or lawn mower should not be used until the adapter is replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft adapter is compatible with the following lawn mower and lawn tractor brands: Husqvarna and Poulan. This part sold individually.

This part is a replacement steering shaft bearing kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current steering shaft bearings are broken, faulty, or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The steering shaft bearing kit provides support for the steering shaft and the steer plate. The bearings may become corroded or worn over time, necessitating replacement. Proper tools such as a socket and wrench set are required to install this part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this steering shaft bearing kit, the appropriate owner's manual and equipment diagrams should be referred to. This bearing kit is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

The gear sector will be a replacement for certain lawn tractor models and riding mowers. The gear sector attaches to the steer plate using a bolt and a washer. The purpose of the gear sector is to help pivot the wheels in different directions. If there is a problem with the part, it can be more difficult to turn and operate the machine properly. Replace the part as soon as possible to ensure the efficiency of the machine.Over time the teeth on the gear sector might start to wear down, which will require a replacement. There is also the chance of the item being bent, corroded, or otherwise damaged. Replacement for the piece is not too difficult. A wrench is needed to complete the install. Ensure the mower or tractor is on a flat surface, powered down and completely cool before starting any work.This gear sector will work as a replacement for some tractor models and riding mowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The part is sold individually and has been sourced from the manufacturer as a genuine OEM replacement part.

This genuine OEM replacement washer is a specially hardened washer to provide more support for a wide range of different lawn appliances. Washers are usually used in conjunction with a nut and a bolt and act as a barrier between those two parts. Washers help to redistribute pressure to prevent the bolt from giving out over time, as well as to provide a stronger grip. Washers can begin to corrode over time, and when this happens, the washer can fuse together with the bolt or nut. This would make the connection difficult to disengage in the case of a bigger repair. It is good practice, then, to replace washers anytime the nut or bolt is also replaced. This way, all parts age at the same rate and will not have to be individually changed out. Use a wrench to unthread the nut and change out a washer. This part is a top of the line replacement washer for a Husqvarna, Weed Eater, Ryobi, Jonsered, or Poulan engine. It comes sourced from the original manufacturer and does not include any other hardware.

This replacement part is a flange nut. This is a genuine replacement part made by Husqvarna. This part is small but important in many types of machinery and appliances. Flange nuts work with other small parts to keep things secure and in place during use. A new flange nut might be needed if the current one is missing or damaged in any way. It is possible that the nut becomes stripped or worn down over time and should be replaced. Be sure the engine is completely powered down before replacing any part. This should be a simple repair and only require common household tools such as a screwdriver or pliers. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure a proper fit and long-lasting use.

This drag link is part of the drive mechanism. It connects the spindle and the sector gear, helping to steer the mower in the appropriate direction when the steering controls are engaged. Over time, this part is subject to constant friction, vibration and repetitive motion, which can cause wear and damage. A replacement may be needed if the part becomes too damaged to function or breaks entirely. This genuine OEM drag link is manufactured by Husqvarna and made to exact standards. It is compatible with select lawn mowers from Craftsman and Husqvarna. It is made of durable metal and requires a wrench to replace. This drag link is sold as an individual unit. Hardware and other parts of the steering assembly are not included and will require a separate purchase. Always wear gloves when performing repairs on lawn equipment. Allow the engine to cool completely before doing any work.

This drag link is a genuine Husqvarna replacement part for lawn mowers, though drag links are found in most small engine operated appliances with steering features, such as lawn tractors, snowblowers, and chipper shredders. The function of a drag link is to link the steering gearbox to the tie rod ends.A drag link might have to be replaced in the event that it suffers damage over time. Symptoms of an overused or damaged drag link could include drifting steering requiring the lawn mower or other small engine appliance to be constantly steered and supervised, a loose steering wheel or abnormal shimmy from the wheel, or inordinate and uneven stress that is visually noticeable on the tires. If any of these symptoms occur, a replacement drag link part should be ordered and secured to the small engine appliance immediately to mitigate any possible further damage to the appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This drag link is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

A hex screw can be used on a variety of different types of lawn and garden equipment. On small machines, it can be used to hold the housing together while on larger machines, it might be used to mount on the gas tank. It's versatile with the ability to secure items including wood, plastic, metal, and brick together. The screw is made of high-quality metal and measures 5/16-18 x ¾ inches. Sometimes these screws can become stripped, get damaged, or even break and will need to be replaced.Inspect the screw for any damage, looseness, or debris that might be causing issues. If the damage is major or the screw is stripped, it will need to be replaced. In most cases, the screw can be removed using nothing more than a screwdriver before inserting the replacement screw. For stripped screws, pliers may be needed to get the original screw out of the equipment.This hex screw is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The screw is compatible with lawnmowers, string trimmers, snowblowers, and tillers by Craftsman, Ariens, Husqvarna, Poulan Pro, Weed Eater, and Poulan.

This replacement part is a bushing. This is a genuine replacement part made by Husqvarna. Bushings are small but important to the overall workings of many appliances. This part adds space between certain parts and reduces noise and friction while the engine is running. A new bushing might be needed if the current one is visibly missing or damaged. If the user is noticing unusual noises coming from inside the machine, it is possible that a bushing is out of place. This can be due to normal wear and tear over time and should be replaced if this is the case. Work gloves are recommended during this simple repair. A screwdriver and possibly a plier will be needed to replace any bushing. This bushing is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This washer is used in the steering column of lawn mowers and lawn tractors. It is silver with smooth edges, and it fits bolt shoulders crafted by Husqvarna. Washers are flat pieces of steel used to prevent stripping of bolts and screws.This part is intended to be used in conjunction with a bolt shoulder and bracket deck suspension. Place the washer against the bracket deck suspension and screw the bolt shoulder through the hole in the washer. This keeps the washer in place and creates a buffer between the bolt and the bracket. Failure to use a washer will prevent the bolts from tightening appropriately and negatively impact load suspension. These washers are expertly crafted. Still, washers may need to be replaced due to rusting or corrosion. These issues, combined with regular wear and tear, can cause the washers to fail or break over time.This washer is compatible with numerous mower models and personal use tractors, including Husqvarna, Poulan, Ariens, and Craftsman. This piece fits any model produced by Husqvarna that requires part #532199162. Sold individually. This part is guaranteed, genuine Husqvarna. This is an OEM replacement part sourced directly from the manufacturer.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower. The purpose of the screw in a lawn mower is to serve as a small fastening component within the internal mechanisms of the appliance, holding components together and in place.The screw in a lawn mower is a small component that can be easily misplaced, lost, or stripped away during the typical lifespan of the appliance. The screw can be stripped away due to general wear and tear from long-term use or as the result of collision with a hard object so as a curb, a rock, or a landscaping block. If this occurs, the screw should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement tie rod. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or defective tie rod on lawn tractors. The tie rod is an essential component of the lawn tractor and enables it to maneuver properly by keeping the front wheels aligned. If this part is dented, broken, or defective in any way, the user may struggle to drive the lawn tractor. Wear work gloves to protect the hands when installing this tie rod. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this tie rod, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This tie rod can be used with a variety of different lawn tractor models manufactured by Husqvarna and Poulan.

This is a subasm pivot that's used for tractors. The part is used to connect the tie rods to the spindle, which will turn the wheel. If the subasm pivot is damaged, it can mean that it will be more difficult to properly turn the lawn tractor. This will make it more difficult to operate the machine efficiently and safely. Replace the part if it has any issues.This piece is made from metal and it is highly durable. Although it is built to last, there is a chance that it might need to be replaced. It could be damaged and bent or broken when the tractor is in use. There is also the possibility that it could rust or wear down over time, which would require a replacement.The subasm pivot will work with certain lawn tractor models from Craftsman and Husqvarna. This piece is sold individually. It is a genuine OEM replacement part that has been sourced right from the manufacturer.

This replacement part is a gear cap. This is a genuine replacement part made by Husqvarna. This part is small but used to keep different gears within the lawnmower safe and secure during use. This part is made of durable plastic and meant to be a strong protector for many gears. A new gear cap might be needed if the current one is missing or damaged in any way. This can include being dented, bent, cracked, or chipped. If the gear cap is not able to stay in place, it might be time to replace it. Be sure to wear work gloves during this repair. It is also recommended that the user refers to the appropriate user manual before replacing this part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.