Parts for Husqvarna YTH20K46-917240461: Steering Parts

This steering wheel is an authentic OEM replacement part sourced directly from the manufacturer for use on lawnmowers and lawn tractors. The steering wheel is used to control the direction of the lawnmower or lawn tractor when it is being operated. When the steering wheel is turned, the steering assembly works to move the wheels in the corresponding direction. If the steering wheel is damaged due to normal wear and tear or the elements, it should be removed and replaced with a new one. Take the key out of the ignition and remove the spark plug from the mower. Use a flat head screwdriver to pop the center insert out of the steering wheel. Loosen the locking washer with a wrench. Remove the locking washer and the flat washer underneath it, set those aside. Lift the steering wheel off the steering boot. Place the new steering wheel on the steering boot. Place the large flat washer over the extension shaft and then the locking washer. Tighten the washer and pop the center insert back into place. This steering wheel is made of durable black molded plastic and is sold as an individual unit. This steering wheel is designed for use on lawn mowers and lawn tractors manufactured by Husqvarna and Jonsered.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This part is a left-hand spindle assembly that is used on lawnmowers. A spindle assembly is a post to which the blade attaches and then spins when the machine is in action. This particular spindle assembly is for the left-hand side. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.A new left-handle spindle assembly may be needed if the original is found to be cracked, broken, bent, or damaged in any way upon visual inspection. The operator may notice that the blades are not cutting evenly or that the blades are not spinning at all. The machine may also make loud cracking noises.This left-hand spindle assembly is a genuine Husqvarna part. It is sold individually. This particular spindle assembly is compatible with the left-hand side of lawnmowers that are manufactured by the Husqvarna brand.

This part is a right-hand spindle assembly that is used on lawnmowers. A spindle assembly is a post that the blade attaches to. It spins when the machine is operating. This specific spindle assembly is for the right-hand side.A new right-handle spindle assembly will be needed if the original is cracked, broken, bent, or damaged in any way. The lawnmower operator may notice that the blades are not cutting evenly, are cutting in a disorganized fashion, or are not spinning at all. The machine may also make loud cracking noises. Remember to wear gloves when handling or performing care and maintenance on any outdoor power equipment machines.This right-hand spindle assembly is a genuine Husqvarna part. It is sold individually. This particular spindle assembly is compatible with the right-hand side of lawnmowers that are manufactured by the Husqvarna brand.

This metal crownlock nut is found in a range of different types of lawn and garden equipment. The nut is often used to help connect and secure the link on the suspension arm. However, it could be used for different purposes depending on the machine. The crownlock nut may need to be replaced for any number of reasons. In some cases, it could have become corroded and no longer provides a secure connection. It could have also become lost. Regardless, users need to have a replacement to ensure their machine is running properly and that running the machine is safe. This is a genuine OEM replacement crownlock nut and it is sold individually. The nut is commonly used with lawn tractors, lawn mowers, and tillers. Compatible brands include Husqvarna and Craftsman. Buyers should note that there are often many different types of nuts in these machines. They need to be sure they are choosing the right one for their needs and their make and model.

This steer plate is a genuine Husqvarna part, sold individually. This steer plate can be used as a replacement part in a lawn mower. The purpose of the steer plate in a lawn mower is to affix to the steering rods so that the plate can have free range of motion when the operator steers the lawn mower in various directions.The steer plate in a lawn mower might have to be completely replaced if the steer plate suffers irreparable damage. This damage can take the form of puncturing, scraping, denting, cracking, chipping, warping, or eroding, and if this damage occurs to the point that the steer plate can no longer serve its typical function, the steer plate should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This steer plate is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This steering shaft adapter is a genuine Husqvarna replacement part for lawn mowers and lawn tractors. The function of a steering shaft adapter is to affix the steering shaft to the steering wheel.Steering shaft adapters can suffer damage from general overuse, exposure, or age, which is likely within the lifespan of a tractor or mower; they can also be damaged in the process of trying to reach surrounding parts for maintenance, such as changing the bushings. Damage to the steering shaft adapter might result in the inability of the front wheels to turn properly. If the front wheels are not turning and other simpler remedies are not solving the issue, the steering shaft adapter should be replaced immediately. The lawn tractor or lawn mower should not be used until the adapter is replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft adapter is compatible with the following lawn mower and lawn tractor brands: Husqvarna and Poulan. This part sold individually.

This part is a replacement steering shaft bearing kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current steering shaft bearings are broken, faulty, or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The steering shaft bearing kit provides support for the steering shaft and the steer plate. The bearings may become corroded or worn over time, necessitating replacement. Proper tools such as a socket and wrench set are required to install this part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this steering shaft bearing kit, the appropriate owner's manual and equipment diagrams should be referred to. This bearing kit is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This sector gear plate is a genuine Husqvarna replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. A sector gear plate is affixed to the steer plate with a bolt and a washer, and its function is to assist in the turning of the wheels from left to right.A sector gear plate might have to be replaced in the event that it suffers damage over time, a common occurrence after long-term usage. The most prevalent form of damage to a sector gear plate is breaking or chipping away at its teeth, which prevents the sector gear plate from turning the wheels in a tight and controlled manner. If several teeth break off of the sector gear plate, a replacement sector gear plate part should be ordered and installed immediately to mitigate any possible further damage to the appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This sector gear plate is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This genuine OEM replacement washer is a specially hardened washer to provide more support for a wide range of different lawn appliances. Washers are usually used in conjunction with a nut and a bolt and act as a barrier between those two parts. Washers help to redistribute pressure to prevent the bolt from giving out over time, as well as to provide a stronger grip. Washers can begin to corrode over time, and when this happens, the washer can fuse together with the bolt or nut. This would make the connection difficult to disengage in the case of a bigger repair. It is good practice, then, to replace washers anytime the nut or bolt is also replaced. This way, all parts age at the same rate and will not have to be individually changed out. Use a wrench to unthread the nut and change out a washer. This part is a top of the line replacement washer for a Husqvarna, Weed Eater, Ryobi, Jonsered, or Poulan engine. It comes sourced from the original manufacturer and does not include any other hardware.

This replacement part is a flange nut. This is a genuine replacement part made by Husqvarna. This part is small but important in many types of machinery and appliances. Flange nuts work with other small parts to keep things secure and in place during use. A new flange nut might be needed if the current one is missing or damaged in any way. It is possible that the nut becomes stripped or worn down over time and should be replaced. Be sure the engine is completely powered down before replacing any part. This should be a simple repair and only require common household tools such as a screwdriver or pliers. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure a proper fit and long-lasting use.

Here is a left-hand draglink that is used specifically for riding mowers and garden tractors. The draglink is an essential part of the mower used to connect the gear selector plate to the spindle. This ensures that the driver can steer the mower. The part is made from metal, and it is highly durable. However, there is always the chance that part of it could break or that it could become corroded. If this happens, and the draglink breaks, it will be impossible to steer the mower. If there are any issues with the draglink, owners should replace it right away. It may be a good idea for the owner to replace the right-hand draglink at the same time. This is a genuine OEM replacement left-hand draglink. It is important for buyers to keep in mind that the left-hand draglink is sold individually. It does not include the right-hand draglink, or the hardware needed to add it to the mower. The part is compatible with more than 150 machines from Husqvarna, Ariens, Craftsman, and Poulan.

A drag link is a part of the steering mechanism, in this case for lawn tractors and riding mowers. It attaches the gear selector plate to the spindle, allowing for the riding mower to be placed into a forward gear. The drag link is also part of the steering assembly, enabling the user of the riding mower to turn the mower. Apart from the cutting deck of the mower, the drag link experiences more movement and more stress than any other part of a lawn tractor. Upon occasion, either through wear or striking objects, the drag link becomes warped or is broken and thus becomes inoperable. In these cases, the drag link must be replaced. In order to replace the drag link, lower the cutting deck completely, remove the steering plate and bushing, and the old steering link. Insert the new link through the proper slots and secure with existing hardware. Replace both bushings. After making sure the wheels are straight, replace the steering plate and raise the cutting deck. This drag link is a genuine OEM part, designed to be an exact replacement for the original drag link. This part is compatible with Jonsered, Poulan, Weed Eater, and Husqvarna riding mowers.

A hex screw can be used on a variety of different types of lawn and garden equipment. On small machines, it can be used to hold the housing together while on larger machines, it might be used to mount on the gas tank. It's versatile with the ability to secure items including wood, plastic, metal, and brick together. The screw is made of high-quality metal and measures 5/16-18 x ¾ inches. Sometimes these screws can become stripped, get damaged, or even break and will need to be replaced.Inspect the screw for any damage, looseness, or debris that might be causing issues. If the damage is major or the screw is stripped, it will need to be replaced. In most cases, the screw can be removed using nothing more than a screwdriver before inserting the replacement screw. For stripped screws, pliers may be needed to get the original screw out of the equipment.This hex screw is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The screw is compatible with lawnmowers, string trimmers, snowblowers, and tillers by Craftsman, Ariens, Husqvarna, Poulan Pro, Weed Eater, and Poulan.

This replacement part is a bushing. This is a genuine replacement part made by Husqvarna. Bushings are small but important to the overall workings of many appliances. This part adds space between certain parts and reduces noise and friction while the engine is running. A new bushing might be needed if the current one is visibly missing or damaged. If the user is noticing unusual noises coming from inside the machine, it is possible that a bushing is out of place. This can be due to normal wear and tear over time and should be replaced if this is the case. Work gloves are recommended during this simple repair. A screwdriver and possibly a plier will be needed to replace any bushing. This bushing is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This washer is used in the steering column of lawn mowers and lawn tractors. It is silver with smooth edges, and it fits bolt shoulders crafted by Husqvarna. Washers are flat pieces of steel used to prevent stripping of bolts and screws.This part is intended to be used in conjunction with a bolt shoulder and bracket deck suspension. Place the washer against the bracket deck suspension and screw the bolt shoulder through the hole in the washer. This keeps the washer in place and creates a buffer between the bolt and the bracket. Failure to use a washer will prevent the bolts from tightening appropriately and negatively impact load suspension. These washers are expertly crafted. Still, washers may need to be replaced due to rusting or corrosion. These issues, combined with regular wear and tear, can cause the washers to fail or break over time.This washer is compatible with numerous mower models and personal use tractors, including Husqvarna, Poulan, Ariens, and Craftsman. This piece fits any model produced by Husqvarna that requires part #532199162. Sold individually. This part is guaranteed, genuine Husqvarna. This is an OEM replacement part sourced directly from the manufacturer.