Parts for Troy-Bilt 25A-258J766: 22" String Trimmer Mower Parts

Clutch control cable for gas line trimmers. Connects handle to clutch mechanism for operator control. Replace if cable is frayed, broken, or stuck.

Nylon nut for lawn equipment. Secures and connects components throughout the machine. Replace if cracked, stripped, or missing for proper assembly.

Rope guide eyebolt for lawn mower recoil starters. Guides the starter rope smoothly during pull starts. Replace if bent, broken, or missing.

This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Handle insulator for lawn mowers and trimmers. Replaces cracked, worn, or missing insulators that protect the handle grip area from wear and damage.

This durable metal screw is designed to be used on many types of lawn and garden equipment, such as lawnmowers and snowblowers. The screw can be used to attach different components together so they stay stable and connected to ensure the equipment works correctly. It can be used on a variety of materials including metal, plastic, bricks, and wood. If the screw needs to be replaced, a visual inspection will indicate that. Screws often become damaged over time or can even break. Some screws also become stripped and no longer do what they are intended for. A hex wrench can be used to remove this screw from the machine so the new one can be installed. After installing the replacement screw, it should be tightened to ensure the materials it brings together are kept flush.This screw is made for use with lawnmowers, snowblowers, chipper shredders, and lawn tractors manufactured by MTD, Yard Machines, Yard-Man, and Troy-Bilt. It is sold as an individual part. This is an authentic OEM replacement part that is sourced directly from the manufacturer. A hex wrench may be needed for the replacement.

Hex screw for lawn mowers and outdoor power equipment. Secures components and panels. Replace if stripped, rusted, or missing for proper assembly.

Self-tapping hex screw for securing components on lawn mowers, tractors, tillers, and outdoor power equipment. Replace when stripped, missing, or worn.

Wheels wobbling or height adjustment not working? This axle assembly secures wheels and enables deck height control on trimmers and mowers. Moderate DIY.

This replacement part is a flywheel combo. This is a genuine replacement part made by MTD. This part is a flywheel connected to a pulley. The combination makes it an important part of many engines and is used to transfer forces to different objects so that the user may operate the machine properly during use. A new flywheel combo might be needed if the current one is no longer working. If the pulley area of this part has been stripped down due to friction, it would be a good idea to replace the flywheel combo. Be sure the engine is turned off before replacing this part to prevent injury during the repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Metal spring washer designed to absorb vibration between nuts and surfaces on lawn mowers and garden equipment. Replace when worn or flattened.

Replace worn spring bell washers causing loose parts or rattling noises. This conical washer cushions heavy loads in lawn equipment. Simple DIY fix.

With small gasoline-powered tools that require control panels, this hex screw attaches the panel to the handles of the tools. Machined to be durable, important screws such as these take a real beating. In their locations at critical points on the handle, the hex screws are considered "wear items," and thus periodically, they must be replaced. The control panel itself is often a location of extreme forces, jostling, and abrupt movement in unpredictable directions. The constant movement, with sheet metal rubbing against the hex screws from every direction, make wear inevitable. The manufacturers recommend that spare screws of this type be kept on hand if the heavy use of the equipment is expected. Among the gasoline-powered tools that use these screws are snowblowers, yard tractors, mowers, tiller, chippers, shredders, and other tools requiring hand-maneuvered levers. These screws are compatible with a number of equipment brands and manufacturers, including MTD, Ryobi, Poulan, Yard-Man, Bolens, Troy-Bilt, and Yard Machines.

Hex head screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if missing, stripped, or damaged during maintenance.

Replace your broken or missing trimmer deflector assembly. Shields operator from grass clippings during use. Direct replacement for worn deflectors.

Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.

Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.

Flat washer for lawn mowers and tractors. Replace if missing, corroded, or damaged during maintenance. Ensures secure fastening of components.

Idler pulley for gas line trimmers and wheeled trimmers. Guides and tensions drive belts. Replace if worn, cracked, or causing belt misalignment.

Idler bracket assembly for gas line trimmers. Supports the idler arm and maintains proper belt tension. Replace if bent, cracked, or broken.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

This is a wheeled string trimmer belt compatible with many brands. The belt's purpose is to drive the unit, transferring power from the engine to the cutting head. Over time, belts are subject to wear and tear, heat, and humidity. This can make the belt brittle and eventually it will snap. In other instances, belts will stretch after being used for long periods and need to be replaced. Replacing the belt is a simple process. Start with the engine off and the spark plug disconnected. Remove the screw holding the chassis cover in place and then the screws holding the debris shield. With the debris shield out of the way, the belt should be clearly visible. Remove the engine pulley, but make sure to note the pulley's position for replacement. Install the new belt and reassemble the trimmer. This part is a genuine OEM part sourced directly from the manufacturer and sold individually. This belt is compatible with Craftsman, Bolens, Remington, Ryobi, and Yard-Man brands.

Replacement cutting line for trimmer mower heads. Threads through the trimmer head to cut grass and weeds. Replace when worn, broken, or depleted.

Replacement spacer for lawn tractors and garden equipment. Maintains proper component alignment and spacing. Order now if original is missing or worn.