Thermador Drip Pan

This replacement tray restores the original fit and support in your appliance. It provides a stable surface for items and replaces a damaged or missing tray to keep things organized and functioning as intended.

• Provides a secure surface to hold items where the original tray sits
• Restores proper fit so items don't tip, slide, or fall
• Direct replacement for a cracked, warped, or missing tray
• Helps ensure the section operates as designed once the tray is seated correctly

• Disconnect power if accessing internal areas or moving the appliance
• Remove the old tray and clean the supports/rails before installing
• Align with existing guides or tabs and press/slide into place until fully seated
• Verify a level, secure fit before loading items back onto the tray

This 6-inch trim ring frames the surface element opening on your cooktop, giving it a clean, finished edge and helping center the element. Replace a discolored or warped ring to restore appearance and proper fit. What it does:

• Frames the 6-inch surface element opening and helps center the element
• Protects and covers the cutout edge for a clean, finished look
• Replaces rings that are rusted, stained, warped, or dented
• Helpful when the element doesn't sit level or gaps appear around the burner

• 1 trim ring (6-inch)

• Disconnect power and allow the cooktop to cool completely before servicing
• Lift/remove the surface element per your product's instructions to access the ring
• Remove the old ring and seat the new ring in the opening with correct orientation
• Reinstall the element and confirm it sits level and securely

A replacement drain pan that captures defrost and condensation water to keep it contained and away from the cabinet and floor. Restores the appliance's normal water-collection path and helps reduce leaks. What it does:

• Collects melting ice and condensation from the evaporator to prevent water from pooling under the appliance.
• Channels collected water toward the drain system so it evaporates or exits as designed.
• Stops common symptoms like puddles or moisture under the unit and musty odors caused by standing water.
• Fits under the evaporator/coil area to restore proper water management.

• Disconnect power to the appliance before service to avoid electrical hazards.
• Remove the required access panels or move the appliance per the manufacturer's guidance to reach the pan.
• Lift out the old pan carefully—it may contain standing water—and position the replacement so the drain outlet and routing match the OEM layout.
• After installation, restore power and check for proper water flow during a defrost cycle; inspect surrounding seals and tubing for proper seating.

This is a replacement grease trough that collects and channels grease and food soil away from the wash area, helping keep the dishwasher base cleaner and preventing buildup around components. Fits the 16.75-inch trough opening. What it does:

• Captures and directs grease and runoff toward the drain area to reduce pooling under the tub
• Helps prevent grease buildup on lower components and sensors that can affect performance
• Restores proper flow path when a cracked or warped trough causes leaks or overflow
• Maintains a cleaner interior environment, reducing odors linked to trapped grease

• One grease trough (16.75 in.)

• Designed as a direct-replacement part; inspect surrounding seals and fasteners while installing
• Disconnect power and water to the appliance before beginning any service
• Handle edges carefully and use recommended tools; replace any damaged clips or seals for a secure fit
• If you see persistent leaks after replacement, recheck alignment and mounting hardware before returning the appliance to service

This grease catch tray collects drips and overflow from the grill/broiler area to help keep the oven or grill cavity cleaner and reduce grease buildup. It fits into the grill assembly to channel grease away from heating elements. What it does:

• Catches grease and drippings from the grill or broiler surface to protect the cavity floor
• Helps reduce smoke and flare-ups caused by grease contacting hot surfaces
• Keeps grease contained for easier cleanup and routine maintenance
• Restores proper grease control when the original tray is damaged, warped, or missing

• One grease catch tray

• Allow the appliance to cool and disconnect power before servicing
• Remove oven racks or grill components as needed to access the tray slot
• Slide the tray into place until it seats securely; no special tools typically required
• Dispose of heavy grease safely and clean the tray regularly per owner manual guidance

This overflow switch is a dishwasher water-level safety sensor that detects excess water and helps stop overfilling. Installing the correct sensor restores proper high-water detection and reduces the risk of leaks or water damage. What it does:

• Detects abnormal high water levels inside the dishwasher tub and signals the control to stop fill or trigger a fault.
• Helps prevent flooding and leak-related damage by shutting off fill when water rises past the sensor.
• Commonly linked to symptoms such as persistent filling, water leaks under the appliance, or error codes related to overfill.
• Works with the dishwasher's control and drain system to keep water level within safe limits.

• Disconnect power (unplug or shut off breaker) and turn off the water supply before beginning.
• Access typically requires removing the lower kick panel or toe panel; follow your model's service instructions.
• Replace the sensor and any associated mounting clips or wiring connectors exactly as removed; ensure secure electrical connections.
• After installation, restore power and run a short cycle to ensure proper operation and that no leaks occur.

This drain pan collects and channels defrost and condensation water away from the evaporator to prevent leaking and overflow. Use this replacement to restore proper water flow and reduce pooling under the appliance. What it does:

• Catches defrost and condensate from the evaporator system
• Directs water toward the drain or evaporator heater for evaporation
• Helps prevent water leaks, puddling, and potential floor damage
• Supports normal defrost cycle drainage

• Disconnect power to the appliance before service
• Remove access panels or kickplate to reach the pan; keep small fasteners organized
• Clean surrounding area and drain path before installing the new pan