Thermador Range Hood Parts

Exterior touch pad control panel for range hood. Mounts on the front of the unit. Replace when the fascia is cracked, broken, or worn to restore appearance.

This is a genuine OEM replacement o-ring sourced directly from the manufacturer for use on range vent hood switches. The o-ring provides a tight seal for the switch and keeps smoke from escaping through the switch connection. If the o-ring becomes worn or damaged, the vent will not remove smoke during cooking and should be replaced. Heat and debris pulled through the vent may cause the o-ring to warp. O-rings are not designed to last forever and may need to be replaced during the life of the appliance to keep it functioning correctly.To start, disconnect the power to the vent hood and dismantle the vent in order to reach the switch. To start, disconnect the switch and locate the o-ring. Remove the old one and dispose of it. Place the new o-ring in the groove and press firmly to seal the part. Lubrication is not necessary for installing the new o-ring. Reassemble the switch and put the vent hood back in place. Connect the power and try the switch to make sure it works. This o-ring is made of heavy-duty black rubber is and sold individually. It is designed for use in range hoods manufactured by Thermidor.

Captures grease and cooking vapors to keep air fresh and prevent buildup. Replace when clogged or discolored. Verify fit by model number and dimensions.

The Lamp Holder is an OEM part for Bosch range hoods. It secures interior lighting fixtures in place above the stovetop, managing connecting wires neatly out of the way. Proper holder positioning ensures consistent task illumination.

Causes of failure can include normal wear from sustained vibration in the kitchen environment. Periodic replacement preserves essential visibility above the cooktop.

Symptoms of a faulty lamp holder are:

• Interior hood light failing to illuminate or flickering inconsistently
• Visible damage or deterioration of mounting clips/anchors
• Loosening of lighting unit from repeated cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Mount, Vibration Rubber Range Hood is an OEM part for Bosch range hoods. It plays a crucial role in mounting the range hood itself and reducing noise and vibrations produced during operation. The rubber vibration mount is designed to absorb shocks and isolate noises, providing a smooth, quiet ventilation experience.  

Symptoms of a bad mount can include looseness or detachment of the range hood, increased vibration transfer to surrounding cabinetry, or failure of the rubber material itself.

Symptoms of a bad mount include:

• Noisy operation from the range hood that transfers to cabinets
• Visible vibration of the range hood body during ventilation  
• Eventual detachment or loosening of the range hood mount
• Reduced vibration damping translating to a rougher ventilation cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
 

Metal mesh grease filter for range hood. Captures airborne grease and cooking particles to protect the ventilation system. Washable and reusable.

Captures cooking grease and particles to protect your range hood blower. Replace when clogged to restore airflow and ventilation. Confirm fit by model number.

This Control Unit is an OEM part for Bosch vent hoods. Serving as the central control hub, this unit governs the various functions and settings of the vent hood. 

A common issue with a malfunctioning Control Unit involves electrical malfunctions or component failure.  

Symptoms of a defective Control Unit may include:

• Inoperative fan or lighting functions
• Unresponsive control buttons or settings
• Erratic behavior or intermittent functioning of the vent hood

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Drive link assembly connects the internal drive system to the blower fan in your range hood. Replace when worn, cracked, or causing uneven motion.

This TH capacitor is an electrical control-circuit capacitor used on compatible Bosch appliances to help stabilize voltage and filter electrical noise for reliable control-board operation. Replacing a failed capacitor can address intermittent control issues. What it does

• Stabilizes control-board voltage and helps filter electrical noise that can cause erratic behavior.
• Supports reliable startup and operation of control circuits.
• Common symptom link: intermittent or unexplained control-board errors, erratic or non-responsive controls.
• Common symptom link: appliance displays control or error codes related to electronics or intermittently fails to start.

• Disconnect power to the appliance at the breaker before servicing to avoid shock.
• Discharge any capacitors and allow boards to sit before touching components; use appropriate ESD precautions.
• Only replace with the exact part number; confirm orientation and connector fit before reassembly.

Protective boot that covers the capacitor terminal on your range hood. Replace if cracked, torn, or missing to shield connections from moisture and dirt.

Fix weak ventilation or excessive noise in your range hood with a new blower wheel. Restores proper airflow and reduces operating sound levels.

Fix range hood lights that won't turn on or buzz loudly with this 120V to 12V transformer. Common fix for halogen light failures. DIY-friendly repair.