Thermador Refrigerator Parts

This ice maker assembly produces and harvests ice for compatible refrigerators, replacing a failed or damaged ice-making unit to restore normal ice production and cycling. Designed as a direct-replacement service part for units that use this OEM assembly. What it does:

• Forms, freezes, and harvests ice automatically as part of the freezer's ice-making cycle.
• Common symptoms it addresses: little or no ice production, ice maker not cycling, or ice trays not filling.
• Works with the refrigerator's water inlet and control signals to dump ice into the bin when ready.
• Replaces a defective ice-making module to stop intermittent operation or visible damage to the ice tray.

• Disconnect power and shut off the water supply before beginning replacement.
• Remove the ice bin and interior trim panels as needed to access the ice maker; keep track of mounting screws.
• Disconnect the wiring harness and water inlet tube carefully; avoid forcing connectors or pinch points.
• After installation, restore power and water, check for leaks, and run the ice-maker test/diagnostic cycle per the refrigerator's service instructions.

This magnetic door gasket seals the appliance door to help keep water and heat inside and maintain proper door closure. It replaces a worn or damaged gasket to reduce leaks and improve sealing performance. What it does:

• Creates a tight seal around the door using embedded magnetic strips
• Helps prevent water or steam from escaping during operation
• Restores proper door alignment and closure when old gasket is warped or torn
• Commonly replaced for visible gaps, persistent leaks, or a door that won't stay closed

• Disconnect power and water supply before starting any repair
• Remove outer door trim or retaining clips as required to access the gasket channel
• Press gasket fully into the door channel, ensuring the magnetic edge seats evenly around the perimeter
• Inspect the door channel for corrosion or debris and replace any damaged mounting hardware

This roller set replaces worn or broken rack wheels so your dishwasher rack slides smoothly and stays aligned. It restores quiet, stable rack movement and prevents the rack from catching or tipping when pulled. What it does:

• Replaces damaged or missing rack wheels to restore smooth sliding action
• Helps keep the rack aligned and prevents it from sticking or catching
• Reduces noise and wobble when opening or closing the rack
• Works with the rack's axle to support proper rolling motion

• Disconnect power and turn off water supply before starting repairs
• Remove the dish rack to access and replace the rollers; keep track of axle and clips
• Use basic hand tools; inspect the axle and track for debris or damage before reassembly

A small flat mounting washer that secures fasteners and provides a stable spacer for assemblies. Replaces worn or missing washers to restore proper part alignment and prevent movement. What it does:

• Acts as a flat spacer under a nut or bolt to distribute load and prevent loosening
• Keeps components aligned and properly spaced to reduce wear
• Helps stop rubbing or metal-on-metal contact that can cause noise or damage
• Commonly needed when fasteners are loose, panels shift, or assemblies wobble

• One flat mounting washer

• Shut off power to the appliance before beginning any service
• Remove any panels or components necessary to access the fastener; use hand tools appropriate for the fastener type
• Replace the washer with the same orientation and retighten the fastener to avoid over-torquing

This bottom refrigerator hinge secures and supports the lower door, restoring proper alignment and smooth opening/closing. It replaces a worn or damaged hinge to stop sagging doors and reduce binding or uneven gaps. What it does:

• Supports the lower edge of the refrigerator door and bears door weight
• Acts as the pivot point for normal door swing and alignment
• Helps stop door sag, rubbing, or uneven sealing caused by a worn hinge
• Reduces binding, scraping, and noise when opening or closing the door

• Turn power off to the appliance and remove food from the door area before starting
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use correct-size tools and follow OEM torque guidance; avoid over-tightening fasteners

The Storage Bin is an OEM part for Whirlpool refrigerators. It provides organized, adjustable storage space in the refrigerator door. The bin has been designed to hold condiments, beverages, snacks, and other small refrigerator items. 

Causes of a bad storage bin can include broken hinges or mounting clips, cracks or holes in the plastic material, or a bent or warped bin that no longer sits securely or organizes items well.

Symptoms of a bad storage bin include:

• Items falling out of the bin 
• Bin not sitting flush or securely in the door
• Difficulty removing or replacing the bin
• Cracked or damaged plastic that affects functionality

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Condenser Fan Motor is an OEM part for Whirlpool brand bottom-mount refrigerators. This motor powers the condenser fan which dissipates heat from the refrigeration system coils, maintaining cool interior temperatures.

Causes of failure include normal bearing wear from continuous rotations, or buildup obstructing free blade movement. 

Symptoms of a faulty motor include:  

• Elevated interior temperatures and frost propagation issues   
• Extended run times and higher energy consumption
• Grinding or buzzing noises emanating from the refrigeration system area

This Whirlpool replacement restores efficient heat removal and preserves food freshness. Compatible with KitchenAid, Maytag, and some Kenmore models too, it prevents future repair bills.
 

This fan motor circulates air inside the appliance to maintain proper airflow and cooling. Replaces a failed blower motor to restore normal air movement and help the unit reach stable temperatures and performance. What it does

• Spins the blower fan to move air through the appliance's airways and heat-exchange areas.
• Helps maintain consistent internal temperature and prevents hotspots.
• Commonly replaced when fan noise increases, fan won't start, or airflow is weak.
• Works with the control system to run at designed speeds for effective performance.

• One fan motor

• Disconnect power before servicing to avoid shock or injury.
• Handle wiring and connectors carefully; reconnect wires to the original terminals.
• Verify fan blade is secure and spins freely after installation.