Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Whirlpool 7MMGDC410BW0: 02 - Top And Console Parts

Parts for Whirlpool 7MMGDC410BW0: 02 - Top And Console Parts

Location on Diagram
Part Description
Price & Availability
2
Best Seller
Product photo
4.9 (43)
By: Whirlpool
Part Number: WPW10117655

Dryer won't start when you push the button or stops running when released? This push to start switch fixes both issues. DIY-friendly, 5-15 minute repair.

More
$59.48

IN STOCK
Ships Today Guaranteed
Add to Cart
3
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP694419

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

  • Produces audible tones for cycle end, timers and other appliance notifications
  • Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
  • Helps you hear and identify completed cycles and timed alerts
  • Small, mountable unit that fits behind the control panel and connects to the control board
What's included:
  • One adjustable buzzer kit
Install notes:
  • Disconnect power before servicing to avoid shock risk
  • Access may require removing the control panel; keep fasteners organized for reassembly
  • Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
  • Test buzzer function with power restored before fully reassembling

More
$71.95

IN STOCK
Ships Today Guaranteed
Add to Cart
4
Product photo
By: Whirlpool
Part Number: WPW10251358
$34.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
5
Product photo
5.0 (2)
By: Whirlpool
Part Number: WPW10327522

This timer knob mounts on the appliance's mechanical timer shaft and lets you select cycles and settings. Replace a cracked or stripped knob to restore smooth, positive control of the timer and accurate cycle selection.

  • Attaches to the timer shaft so you can set cycle and time
  • Provides a secure grip for selecting and adjusting settings
  • Common symptoms: knob spins without moving the timer, feels loose, cracked, or missing
  • Helps restore proper engagement when the hub is worn or stripped
What's included: 1 timer knob Install notes:
  • Disconnect power before servicing
  • Pull the old knob straight off the timer shaft
  • Align the flat/splines of the new knob with the shaft and press on firmly
  • Rotate through a full turn to confirm proper engagement

More
$47.41

IN STOCK
Ships Today Guaranteed
Add to Cart
6
By: Whirlpool
Part Number: W10103406

Rear panel for dryers. Covers the back of the cabinet. Replace if cracked, damaged, or missing to restore the outer appearance and structure.

More
$62.61

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
7
Product photo
By: Whirlpool
Part Number: 8530169

Dryer not heating properly or overheating? This temperature switch regulates heat levels to restore safe, effective drying. Simple DIY repair.

More
$69.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
8
Product photo
By: Whirlpool
Part Number: WPW10251355
$34.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
9
Best Seller
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP693995

This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
10
Best Seller
Product photo
4.9 (171)
By: Whirlpool
Part Number: WPW10717210

Captures lint during each cycle to maintain airflow and prevent overheating. Replace if torn, warped, or damaged. Verify fit using your model number.

More
$59.73

IN STOCK
Ships Today Guaranteed
Add to Cart
11
Best Seller
Product photo
4.9 (22)
By: Whirlpool
Part Number: WP8536939

This is a D-shaped knob insert or spring clip that fits inside a control knob and connects it to the control shaft on the dryer's front panel. It ensures the knob grips the shaft properly so you can turn the timer or selector. Replace this insert if your control knob spins freely without engaging the shaft or if the knob feels loose and won't stay in position.

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
12
Best Seller
Product photo
4.6 (8)
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
13
Product photo
5.0 (5)
By: Whirlpool
Part Number: W11693756

Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.

More
$12.54

IN STOCK
Ships Today Guaranteed
Add to Cart
14
Best Seller
Product photo
4.9 (15)
By: Whirlpool
Part Number: WP8312709

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

  • Loose console assembly that is not securely fastened  
  • Misaligned or dangling controls that do not sit flush
  • Dislodged console at risk of detaching from housing
  • Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$20.38

IN STOCK
Ships Today Guaranteed
Add to Cart
15
By: Whirlpool
Part Number: W10071310
$188.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
16

Top

By: Whirlpool
Part Number: WPW10112599
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

17
By: Whirlpool
Part Number: W10316616

This is a foam seal that fits along the control panel area of a dryer, creating a barrier against moisture, lint, and air leaks. It helps protect internal control components from heat and debris. Replace this seal if it is cracked, compressed, or missing, which can allow lint buildup near controls or cause air leaks that reduce drying efficiency.

More
$17.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
18
Product photo
By: Whirlpool
Part Number: WPW10327523

A replacement selector knob selection assembly that restores a secure, easy-to-turn control for cycle or setting selection. Replaces a cracked, loose, or missing knob so you can confidently select functions again. What it does:

  • Replaces a worn, broken, or missing selector knob used to choose cycles or settings
  • Provides a secure grip and positive engagement with the control shaft
  • Helps stop slipping, wobbling, or a knob that won't turn properly
  • Restores normal control operation when the original knob is damaged
What's included:
  • One selector knob selection assembly
Install notes:
  • Disconnect power to the appliance before starting any repair
  • Most knobs pull straight off the control shaft; align the splines and press on until fully seated
  • If the knob resists, verify orientation—do not force to avoid shaft damage

More
$38.95

IN STOCK
Ships Today Guaranteed
Add to Cart
19
Product photo
By: Whirlpool
Part Number: WP3405156

This rotary on/off switch controls the dryer's Finish Guard (also called Wrinkle Guard/Wrinkle Shield) feature. Replacing it restores proper control of the post-cycle intermittent tumbling that helps reduce wrinkles, preventing the feature from being stuck on or off.

  • Provides 2-position on/off selection for the Finish Guard/Wrinkle Guard function
  • Failure can cause the feature not to engage or to stay on after the cycle ends
  • Knob may feel loose or fail to click when the switch is worn
  • Mounts in the control console and interfaces with the external selector knob
What's included: 1 rotary switch Installation notes:
  • Disconnect power before servicing
  • Access through the control console; remove paneling as needed
  • Transfer wires one at a time or photograph connections for reference
  • Reinstall using the existing knob and mounting hardware

More
$69.95

IN STOCK
Ships Today Guaranteed
Add to Cart
20
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP3400818

Fixes loose or wobbly timer controls by securing the timer assembly to its mounting bracket. Simple 5-minute repair restores proper cycle operation.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
21
Best Seller
Product photo
4.9 (153)
By: Whirlpool
Part Number: WP8566184

Dryer won't stop running or timer knob doesn't advance? The timer control regulates cycle duration. Moderate DIY repair, about 30 minutes to replace.

More
$177.95

IN STOCK
Ships Today Guaranteed
Add to Cart
22
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPW10476828

Dryer stops early on auto cycle but works on timed? The moisture sensor control board monitors dryness levels. DIY-friendly repair, 15-20 minutes.

More
$192.35

IN STOCK
Ships Today Guaranteed
Add to Cart
23
By: Whirlpool
Part Number: W10592516
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

24
By: Whirlpool
Part Number: W10123956

Sound absorber insulation pad for dryers. Installs inside cabinet to dampen noise and vibration. Replace if torn, compressed, or missing.

More
$22.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
25
Product photo
By: Whirlpool
Part Number: W10113080
$26.21

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google