Parts for Lg 31463: Top Cover Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This detergent dispenser box is the molded housing that holds and guides liquid or powder detergent inside the washer dispenser assembly, helping deliver detergent into the wash at the proper time. What it does

• Houses detergent and channels it to the washer's wash tub during the cycle
• Prevents detergent from spilling or pooling in the dispenser area
• Helps ensure measured detergent flows into the machine when the cycle starts
• Common symptom: detergent stays in the drawer or does not fully dispense

• Disconnect power (and water if applicable) before service
• Handle the housing carefully to avoid cracking plastic tabs or seals
• Inspect adjoining seals, slides, and mounting clips and replace if worn
• Refer to the washer's service manual or exploded parts diagram for correct removal and reassembly

Top cover replaces a damaged or worn cabinet top to restore the appliance's appearance and protect internal components from dust and moisture. It's a direct-fit exterior panel used where the cabinet top is cracked, dented, or warped. What it does:

• Covers and protects internal components from debris, moisture, and everyday wear
• Restores the appliance's cosmetic appearance by replacing a scratched or dented top
• Eliminates rattling or movement caused by a loose or damaged top panel
• Provides a secure surface for control panels, hinges, and trim to mount to

• Disconnect power before servicing; work on a cool, dry surface
• Remove any trim, control panel, or hinges that block access per your model's service instructions
• Lift off the old top and align the replacement; secure with the original fasteners

Customized screw that secures washer panels, trim pieces, and brackets. Replaces lost or damaged fasteners to restore stability and reduce rattling.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fixes detergent not dispensing or leaking during wash. This washer dispenser drawer assembly holds and releases soap at the right cycle time.

Secures washer components in place. Replace if loose, broken, or missing to prevent rattling and part displacement. Verify fit with your model number.

Replaces the worn, cracked, or missing cap that covers the fabric softener chamber in your washer dispenser. Restores proper containment and function.

This noise filter assembly is an electronic component that suppresses electromagnetic interference generated by the washer's motor and control board. It is typically mounted near the power inlet and helps protect other household electronics from electrical noise. Replace this assembly if your washer fails to start, trips a breaker, or if the filter housing appears burned or damaged.

Secures hose connections to maintain watertight seals in your washer. Replace if you notice leaks or loose hoses during operation. Verify fit with model number.

This is a friction oil damper assembly that mounts at the lid hinge of a top-load washer. It provides controlled resistance so the lid opens and closes slowly and smoothly instead of slamming shut. Replace this part if the lid drops down abruptly, the hinge feels loose, or the damper mechanism no longer provides resistance when lifting or lowering the lid.

Fix detergent not dispensing or residue buildup. This washer dispenser assembly releases detergent and fabric softener at the right time during cycles.

Fix detergent leaks or dispenser jams with this washer detergent housing assembly. Routes detergent properly and replaces cracked or warped housings.

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

• Directs incoming water from the fill valve to the dispenser/tub during wash cycles
• Maintains a sealed path to prevent internal or external leaks
• Helps the washer reach proper fill levels and timing
• Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error

• Unplug the washer and turn off both hot and cold water supplies
• Keep towels or a pan handy; relieve residual water pressure before disconnecting
• Note the original routing; fully seat the hose on fittings and secure with existing clamps
• Restore water and power, then run a quick fill to check for leaks

Fix a leaking or cracked fabric softener dispenser with this washer softener cap. Easy DIY repair with no tools needed—just remove and replace in minutes.

Washer won't start and shows door error code? This door interlock switch assembly fixes DE or DL errors when the lid won't lock. 10-15 minute repair.

Fix a washer lid that won't stay open or close properly with this door hinge. Restores smooth operation and proper door alignment. DIY-friendly repair.

Connects water inlet valve to tub in your washer. Replace if cracked, leaking, or ports are stripped. Ensures secure, leak-proof connection during cycles.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Washer won't fill or won't stop filling? This water inlet valve controls water flow into the tub. DIY-friendly repair, typically takes 10-15 minutes.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.