Parts for Lg 35452: Top Cover Assembly Parts

Protective cover for washer control panel or component housing. Replaces cracked, broken, or missing covers. Shields internal parts from damage.

This rear cabinet panel replaces the damaged or worn outer back cover on your appliance, restoring structural protection and keeping internal components shielded from dust and debris. It helps maintain safe operation and appliance appearance. What it does:

• Covers and protects internal components at the back of the appliance
• Prevents dust, dirt, and small objects from entering service areas
• Restores proper airflow paths and enclosure integrity when the original panel is dented or missing
• Reduces vibration noise caused by loose or damaged rear panels

• Disconnect power (and water supply if applicable) before beginning any repair
• Use appropriate fasteners and torque to secure the panel; do not overtighten to avoid cracking
• If sharp edges are present, wear gloves and eye protection during installation

Secures washer components in place. Replace if loose, broken, or missing to prevent rattling and part displacement. Verify fit with your model number.

Replace your washer's control panel housing case if cracked, broken, or damaged. This protective cover secures and shields internal components.

The Lid Assembly is an OEM part part for LG washing machines. The lid includes all necessary components that provide an effective barrier during washing cycles.

Causes of a bad lid assembly can be cracks or breaks from repeated use, damaged hinges that affect proper sealing, or missing gaskets that compromise water tightness.

Symptoms of failure include:

• Water leaks from around the lid during operation
• Inability to securely close or lock the lid in place
• Excessive noise or rattling from a loose fitting lid

This OEM LG part is also compatible with some Kenmore models.

Secures internal washer components in proper alignment. Replace this mounting bracket if cracked, rusted, broken, or missing to restore stability.

Fix unresponsive buttons or blank display issues. This washer display power control board restores front-panel functions and display illumination.

Secures internal components to the washer frame. Replace if your bracket is cracked, rusted, broken, or missing to restore stable support and alignment.

Fix detergent not dispensing or a cracked drawer with this washer detergent dispenser. Slides out for easy replacement in most front-load models.

Replaces the worn, cracked, or missing cap that covers the fabric softener chamber in your washer dispenser. Restores proper containment and function.

This knob assembly replaces a worn or broken control knob so you can reliably set and adjust appliance settings. It restores a secure, easy-to-turn interface for the appliance's control shaft. What it does:

• Fits onto the control shaft to allow manual selection of settings and temperatures.
• Replaces cracked, stripped, or loose knobs that no longer grip the control shaft.
• Helps resolve issues where the control won't turn smoothly or slips while changing settings.
• Restores tactile feedback for accurate user control.

• Disconnect power to the appliance before removing or installing the knob.
• Pull the old knob straight off the control shaft.
• Align the knob's internal splines with the control shaft and push until fully seated.
• If knob does not seat or control still slips, inspect shaft splines and replace damaged components as needed.

Suppresses electrical interference on your washer's AC power line to protect control boards. Replace if washer won't power on, stops mid-cycle, or controls malfunction. Verify fit by model number.

Molded trim piece that shields and supports the washer guide track assembly. Replace if cracked, broken, or missing to maintain smooth alignment.

Leaking water behind your washer? A cracked inlet hose is often the culprit. This hose channels water from your supply line into the machine during fill.

This rubber fill hose connects the household hot water supply valve to the washing machine's water inlet valve. It delivers hot water into the wash tub during the fill cycle. Replace this hose if it is cracked, leaking, bulging, or showing signs of deterioration to prevent water damage.

Fix detergent leaks or dispenser jams with this washer detergent housing assembly. Routes detergent properly and replaces cracked or warped housings.

This genuine OEM control board manufactured by LG is intended to replace a broken or faulty part in washing machines. The control board needs to be kept in proper working order, as it directly controls and monitors the washing machine functions, including the draining and spinning cycles. Over time or with regular appliance use, this part could deteriorate to the point of failure, causing the machine to stop working. Unplug the appliance from power and water before proceeding with replacements or repairs. This control board has been sourced from the manufacturer and is compatible with washing machine models manufactured by LG and other brands. This part has been made from high-quality, durable, non-corrosive materials and is only sold individually.

Fix a leaking or cracked fabric softener dispenser with this washer softener cap. Easy DIY repair with no tools needed—just remove and replace in minutes.

This small cover cap conceals an exposed fastener or opening on your appliance, restoring a clean, finished look. It also helps protect the area from dust and splashes for a tidy, long-lasting installation.

• Covers and protects an open screw hole or attachment point on a panel or door
• Restores a clean, factory appearance
• Helps keep dust and moisture out of the opening
• Common signs it's needed: missing cap, cracked/broken cap, loose cap, won't stay clipped

• Disconnect power (and water, if applicable) before servicing exterior panels or doors
• Note the cap's orientation and any retaining tabs before removal
• Use a plastic pry tool to gently release the old cap; press the new cap until fully seated
• Avoid forcing the cap or overtightening any underlying fastener to prevent damage

Dispenses detergent, softener, and bleach during wash cycles. Replace if cracked, clogged, or disintegrated. Confirm fit with your model number.

Fix dispenser overflow or leaking issues with this washer detergent drawer assembly. Channels water through detergent and softener compartments. DIY repair.

Connects water inlet valve to tub in your washer. Replace if cracked, leaking, or ports are stripped. Ensures secure, leak-proof connection during cycles.

Fix DL error code or washer that won't start with this lid switch and lock assembly. DIY repair in about 20 minutes with basic tools and video guide.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Washer won't fill or won't stop filling? This water inlet valve controls water flow into the tub. DIY-friendly repair, typically takes 10-15 minutes.