Parts for Frigidaire GLEFM97FPBC: 07 - Top / Drawer Parts

This inner cabinet liner replaces a cracked, warped, or otherwise damaged refrigerator interior surface to restore a clean, smooth food-storage area and help maintain proper shelving fit. Fits the refrigerator's fresh-food compartment. What it does

• Replaces a damaged or cracked interior surface that can trap spills or odors
• Restores smooth mounting surfaces for shelves, bins, and door components
• Helps maintain a clean, sanitary interior that's easier to wipe and sanitize
• Addresses visible liner damage, delamination, or large cosmetic defects

• Disconnect power and remove all food, shelves, and door parts before starting
• Handle carefully; liner edges and clips may be sharp or brittle on older units
• Some installations require adhesive, clips, or trim fasteners—retain original hardware

This inner oven door glass replaces a cracked or damaged oven door window to restore visibility and help the door seal properly. It fits behind the exterior door panel and provides a clear view of the oven cavity while resisting heat. What it does:

• Replaces cracked, chipped, or shattered inner oven door glass
• Restores clear visibility into the oven for safe cooking monitoring
• Helps maintain proper oven door seal and reduces heat loss
• Prevents loose glass fragments from entering the oven cavity
• Compatible with oven door assemblies that use a single inner glass panel

• Disconnect power to the appliance and ensure the oven is completely cool before beginning.
• Wear cut-resistant gloves and eye protection when handling glass to avoid injury.
• Removal usually requires opening the oven door and removing fasteners or clips; keep track of all screws and brackets.

This oven bake element is the heating element that warms the oven cavity for baking and roasting. Replacing a damaged element restores proper oven heating and helps return cooking performance to normal. What it does:

• Heats the oven interior for baking, roasting and browning.
• Replaces elements that are visibly burnt, cracked, broken, or no longer glow when the oven is on.
• Common symptoms it can fix: little or no heat from the oven, uneven cooking, or an element that sparks or shows burn spots.
• Works as the direct heater inside the oven cavity; connects to the oven terminal block.

• Disconnect power at the breaker or unplug the appliance before starting any repair.
• Access typically requires removing the oven interior panels or rear access panel; support the element while disconnecting terminals.
• Handle terminals and sharp sheet metal carefully; use insulated tools and secure terminal connections.

The Dual Element is an OEM part for Frigidaire ranges. This element features two heating zones, allowing for versatile cooking options by providing both high and low heat settings on the same burner. It ensures efficient and consistent heating, making it ideal for various cooking tasks. It contains a 9-inch, 1200-watt element and a 6-inch, 1300-watt element, combining for 2500 watts at 240 volts

Causes of a bad dual element can include electrical issues, wear and tear from regular use, or physical damage such as cracks or breaks in the heating element. These issues can lead to inconsistent heating or complete failure of the element.

Symptoms of a bad dual element include:

• Burner not heating up
• Inconsistent or uneven heating
• Element not switching between high and low heat
• Visible damage to the element

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Sensor Probe is an OEM part for Frigidaire ovens and ranges. This sensor is essential for monitoring the oven's internal temperature and communicating with the control board to maintain accurate cooking temperatures. It helps ensure that your oven heats to the desired setting and maintains consistent temperatures throughout the cooking process.

You should replace this sensor probe if it becomes faulty. Common issues that lead to a bad sensor probe include regular wear and tear, exposure to high temperatures over extended periods, or electrical failures within the sensor itself. Physical damage from accidental impacts during cleaning or maintenance can also compromise the sensor's functionality.

Symptoms of a bad sensor probe include:

• Inaccurate oven temperature readings
• Oven not reaching the set temperature
• Error codes related to temperature control
• Oven overheating or underheating

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement part is a black element mounting clip used in ranges or wall ovens. This clip is used for surface elements on electric ranges and ovens. The clip itself connects the surface of the element to the support bracket which allows the stove to heat up. The user might need a new clip or clips if the heating element on the stove is loose, if the heating element is completely detached, or if the clip itself is bent or broken. This clip is black and made of sturdy metal that can withstand heat as well as strain on the clip itself. Installation of this clip is very simple as it just requires replacing the old one with a new one and making sure it is secure. Pliers might be required if the old clip is bent or stuck near or on the heating element. There are no special tools needed for this repair. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from Frigidaire and other brands like Electrolux, Gibson, Kelvinator, Crosley, Westinghouse, and more.

Size: 10-24 x 1.375 inch.

This bake element heats the oven cavity so your range can reach and maintain baking temperatures for cooking and roasting. Replaces a worn or damaged oven element to restore consistent oven heating. What it does:

• Heats the oven interior during bake cycles to cook food evenly
• Restores expected oven temperature when a faulty element prevents heating
• Helps eliminate uneven baking or no-heat symptoms caused by a broken element
• Visible signs to watch for: blistering, breaks, or burn marks on the element

• One bake (oven) heating element

• Disconnect power to the appliance at the breaker or unplug before servicing
• Handle the element carefully to avoid bending or damaging terminals
• Verify correct part fit and terminal type for your model before installation

This replacement control panel restores the appliance's front console so you can access controls and maintain the unit's appearance. It fits where the original panel mounted and matches OEM form and function. What it does:

• Provides the front console surface and button/selector openings for normal control operation
• Replaces cracked, scratched or cosmetically damaged panels to restore appearance
• Helps resolve issues where the panel surface is broken or buttons cannot be used due to damage
• Matches OEM mounting points for a direct-fit replacement

• Disconnect power to the appliance before beginning any repair
• Handle edges gently; panels can have sharp sheet-metal or plastic edges
• Basic hand tools are typically required; keep mounting screws and clips for reuse

This flat washer is a small hardware component used in Frigidaire laundry appliances to secure fasteners and maintain proper spacing. It helps keep connections tight and reduces wear between joined parts. What it does:

• Provides a smooth bearing surface for bolts, screws or nuts
• Distributes load to prevent fastener pull-through or damage
• Helps maintain correct spacing and alignment of assembled components
• Reduces wear and abrasion between mating metal parts

• Wear safety gloves and eye protection when working on appliances
• Disconnect power and water supply before accessing internal components
• Inspect mating parts (bolt, nut, surrounding surfaces) and replace any damaged hardware
• Tighten fasteners to secure fit; avoid over-tightening which can deform the washer

Size: 6-20 x 0.312 inch.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.