Parts for Frigidaire LEEFM389FEF: 07 - Top / Drawer Parts

This inner cabinet liner replaces a cracked, warped, or otherwise damaged refrigerator interior surface to restore a clean, smooth food-storage area and help maintain proper shelving fit. Fits the refrigerator's fresh-food compartment. What it does

• Replaces a damaged or cracked interior surface that can trap spills or odors
• Restores smooth mounting surfaces for shelves, bins, and door components
• Helps maintain a clean, sanitary interior that's easier to wipe and sanitize
• Addresses visible liner damage, delamination, or large cosmetic defects

• Disconnect power and remove all food, shelves, and door parts before starting
• Handle carefully; liner edges and clips may be sharp or brittle on older units
• Some installations require adhesive, clips, or trim fasteners—retain original hardware

Replaces cracked, chipped, or shattered inner oven door glass. Installs behind the exterior door panel to restore visibility and proper sealing.

Replaces cracked or missing sound dampening insulation in your range. Installs inside cabinet to reduce noise and vibration during operation.

Sound dampening insulation for ranges. Installs inside the cabinet to reduce operational noise. Replace if torn, compressed, or missing for quieter use.

Sound dampening insulation for ranges. Installs inside the range cavity to reduce noise. Replace if worn, torn, missing, or damaged during repairs.

The primary heating component that generates hot air for clothes drying, typically consisting of metal coils housed in a protective casing. Located inside the dryer cabinet, replace when clothes won't dry, take excessive time to dry, or the dryer runs but produces no heat.

This 100W radiant element replaces a failed warming element to restore gentle, even heat in the appliance's warmer/drawer. It delivers low-profile radiant heat for keeping food warm between cooking and serving. What it does:

• Radiates low-level heat to maintain food temperature in the warmer or drawer
• Replaces a broken or non-heating warmer element
• Common symptom: warmer drawer not holding temperature or not heating
• Works as the heating element that sits under the warming surface to provide consistent warmth

• Disconnect power to the appliance before attempting service
• Inspect mounting and wiring; replace any damaged connectors or mounting hardware as needed
• Handle the element carefully to avoid bending or damaging the heating surface

Dual element not heating or only outer ring works? This cooktop surface element fits both heating zones. DIY repair typically takes 15-30 minutes.

Burner not heating? This 6-inch surface heating element restores cooktop function. DIY repair in 10-30 minutes with basic tools and simple instructions.

Replacement glass main top for your range cooktop. Installs on the cooking surface. Order a new top if yours is cracked, chipped, or broken.

Spacer for range oven doors that maintains proper clearance and alignment. Replace if missing, cracked, or worn to restore correct door positioning.

Mounting bracket for electric and gas ranges. Secures components in place. Replace if bent, cracked, or broken to restore proper fitment and stability.

Replace the channel trim on your range door when it becomes cracked, broken, or damaged. This structural component installs along the door edge for a secure fit.

Fix F10 error codes and inconsistent oven temperatures with this sensor probe. Monitors internal temp for accurate cooking. Moderate DIY repair.

This replacement part is a black element mounting clip used in ranges or wall ovens. This clip is used for surface elements on electric ranges and ovens. The clip itself connects the surface of the element to the support bracket which allows the stove to heat up. The user might need a new clip or clips if the heating element on the stove is loose, if the heating element is completely detached, or if the clip itself is bent or broken. This clip is black and made of sturdy metal that can withstand heat as well as strain on the clip itself. Installation of this clip is very simple as it just requires replacing the old one with a new one and making sure it is secure. Pliers might be required if the old clip is bent or stuck near or on the heating element. There are no special tools needed for this repair. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from Frigidaire and other brands like Electrolux, Gibson, Kelvinator, Crosley, Westinghouse, and more.

Mounting screw for range oven door handles. Secures the handle to the door panel. Replace when stripped, corroded, missing, or if handle is loose.

Oven not heating properly or baking unevenly? This bake element heats the oven cavity to reach and maintain baking temperatures for cooking and roasting.

Replace your damaged or worn range side panel. This exterior cabinet panel installs on the side of your range to restore its appearance and structure.

This replacement control panel restores the appliance's front console so you can access controls and maintain the unit's appearance. It fits where the original panel mounted and matches OEM form and function. What it does:

• Provides the front console surface and button/selector openings for normal control operation
• Replaces cracked, scratched or cosmetically damaged panels to restore appearance
• Helps resolve issues where the panel surface is broken or buttons cannot be used due to damage
• Matches OEM mounting points for a direct-fit replacement

• Disconnect power to the appliance before beginning any repair
• Handle edges gently; panels can have sharp sheet-metal or plastic edges
• Basic hand tools are typically required; keep mounting screws and clips for reuse

This flat washer is a small hardware component used in Frigidaire laundry appliances to secure fasteners and maintain proper spacing. It helps keep connections tight and reduces wear between joined parts. What it does:

• Provides a smooth bearing surface for bolts, screws or nuts
• Distributes load to prevent fastener pull-through or damage
• Helps maintain correct spacing and alignment of assembled components
• Reduces wear and abrasion between mating metal parts

• Wear safety gloves and eye protection when working on appliances
• Disconnect power and water supply before accessing internal components
• Inspect mating parts (bolt, nut, surrounding surfaces) and replace any damaged hardware
• Tighten fasteners to secure fit; avoid over-tightening which can deform the washer

This flat washer is a small hardware component used in Frigidaire laundry appliances to secure fasteners and maintain proper spacing. It helps keep connections tight and reduces wear between joined parts. What it does:

• Provides a smooth bearing surface for bolts, screws or nuts
• Distributes load to prevent fastener pull-through or damage
• Helps maintain correct spacing and alignment of assembled components
• Reduces wear and abrasion between mating metal parts

• Wear safety gloves and eye protection when working on appliances
• Disconnect power and water supply before accessing internal components
• Inspect mating parts (bolt, nut, surrounding surfaces) and replace any damaged hardware
• Tighten fasteners to secure fit; avoid over-tightening which can deform the washer

Touch-up paint for electric ranges. Covers scratches, chips, and worn spots on exterior surfaces. Essential for restoring appearance after damage.

Touch-up paint for electric ranges. Covers scratches, chips, and worn spots on exterior surfaces. Essential for restoring appearance after damage.

Size: 6-20 x 0.312 inch.

Size: 6-20 x 0.312 inch.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.