Parts for Ge GTWN8150D0WS: Top Panel & Lid Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This shield pressure sensor detects and reports pressure changes to the appliance control so water and air systems operate correctly. Replacing a failing sensor restores accurate pressure feedback for proper cycle control and performance. What it does:

• Monitors pressure changes and sends a signal to the control board for correct cycle operation
• Helps the appliance detect fill level, drain status or airflow depending on application
• A faulty sensor can cause incorrect cycles, error codes, or fill/drain problems
• Works as the system-level feedback component between plumbing/air paths and electronics

• Disconnect power to the appliance before starting any repair
• Handle the sensor and electrical connector carefully to avoid damage
• Ensure hoses/lines and electrical connectors are routed and seated as originally installed

This rubber lid bumper cushions the washer lid to prevent metal-on-metal contact and reduce noise and wear. It restores proper lid seating and helps stop banging or rattling during operation. What it does:

• Cushions the lid edge to absorb impact and reduce noise
• Helps align the lid for secure closing and proper latch engagement
• Prevents lid wear and chipping from repeated contact
• Simple replacement for visible cracking, compression, or missing bumpers

• One rubber lid bumper

• Designed for top-load washer lids; install by pushing into the lid hole or slot until seated
• No special tools typically required; inspect mating surfaces and replace any damaged fasteners
• Disconnect power before performing any repairs that expose electrical components or switches

Size: 8 - 18 ab.

This genuine replacement clip secures interior appliance parts so panels and components stay in place and operate quietly. It restores proper fit and helps stop rattles or loose trim caused by a broken or missing retainer. What it does:

• Secures and aligns panels, trim, or internal components to prevent shifting
• Stops rattling or vibration caused by a loose or missing clip
• Restores proper fit where the original fastener has broken or worn
• Fits the original mounting point and snaps into place for a firm hold

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access the clip location by removing the panel or trim per your model's service instructions
• Press the clip into the mounting slot until it snaps; replace any damaged surrounding hardware

This lid lock bezel is the molded trim that snaps into the washer's top panel opening and holds the lid lock in place. Replace a cracked or missing bezel to keep the lock secure and ensure consistent lid-closed detection during cycles.

• Secures and aligns the lid lock within the top panel opening
• Covers the cutout for a finished look and protected edges
• Helps prevent the lock from wobbling or falling through the opening
• Common signs of failure: broken/missing bezel, loose lid lock, intermittent "lid open" errors, or cycles that won't start because the lock can't seat

• Disconnect power and water supply before service
• Lift or hinge the top panel per model instructions to access the lock from below
• Detach the lid lock from the underside, release the old bezel tabs, and remove
• Snap in the new bezel, reinstall the lock with proper orientation, and test operation

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Includes 12 screws.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This flexible dispenser hose carries water from the refrigerator supply to the door dispenser and ice/water valve, restoring reliable water flow for dispensing and ice-making. Replaces a cracked, kinked, or leaking dispenser line. What it does:

• Delivers water from the household inlet to the dispenser/valve for normal dispensing and ice operations
• Prevents leaks and maintains proper water pressure when intact
• Stops water leaks caused by cracks, splits or worn tubing
• Helps eliminate intermittent or no-water symptoms at the dispenser

• Turn off water supply and unplug the appliance before replacing the hose.
• Inspect fittings and seals; replace any damaged clamps or gaskets for a secure connection.
• Route the hose to avoid sharp bends or pinching that can restrict flow or cause wear.

This bulk replacement hose provides a plain-language replacement for damaged or worn appliance hoses. Use it to restore a secure water connection and stop leaks or restricted flow where the original hose is failing. What it does

• Carries water between components to maintain normal flow
• Replaces cracked, split, or brittle hose sections that can leak
• Helps resolve symptoms like visible leaks, reduced water flow, or pooling near the hose
• Designed for cutting and fitting when a specific hose length is required

• One bulk hose (cut-to-length)

• Cut to the exact length required and secure ends with appropriate clamps or fittings
• Inspect mating fittings and clamps for wear; replace if damaged
• Turn off power and water supply before installation and test connections for leaks after restoring service

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

A flat washer used at the water valve connection to create a reliable seal and help prevent leaks. Small, simple replacement that restores a tight water inlet connection and reduces drip or seepage around the valve. What it does:

• Seats between the water valve fitting and hose or tube to form a watertight seal
• Helps stop leaks or slow drips originating at the valve connection
• Stabilizes the connection to reduce movement-related wear
• Common symptom: visible leaking or dripping at the valve or hose connection

• Turn off water supply and unplug the appliance before servicing
• Remove the hose or fitting, replace the old washer, and reseat the connection
• Hand-tighten fittings, then snug slightly with a wrench—avoid over-tightening
• Inspect valve/gasket surfaces for debris or damage and replace if worn

This flat washer seals the water valve connection to help prevent leaks and ensure a reliable water supply. It's a simple replacement that restores a watertight seal where the valve meets the hose or fitting. What it does

• Creates a flat, compressible seal at the water valve connection to stop drips and leaks.
• Replaces a worn or flattened washer that can cause slow leaks or pooling under the appliance.
• Helps maintain proper water flow by ensuring a tight, leak-free joint.
• Useful when replacing or servicing the inlet valve or supply fittings.

• Turn off water supply and unplug the appliance before replacing the washer.
• Inspect mating surfaces and the valve seat; clean debris before installing the new washer.
• Seat the washer flat against the connection and tighten fittings by hand, then snug with a wrench—avoid overtightening.
• If leaks persist after replacement, recheck seating and replace damaged fittings or seals as needed.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.