Troy-Bilt Parts

This is an authentic OEM replacement flange bearing sourced directly from the manufacturer that is a component in many different lawn and garden machines. The flange bearing is used to tightly fit between two connected components. This connection creates an airtight seal. Over time and with normal wear and tear, the flange can become worn and lose the seal. When this happens, the flange will need to be replaced. The flange helps to distribute the weight load in some instances and if it is damaged, the weight would be displaced and could lead to serious energy.Replacement depends on the location of the flange that needs to be replaced. Place the equipment on a flat surface and disconnect the spark plug wire. Take the machine's components off as needed to access the flange and remove it using a pair of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Reassemble the machine using a reverse process.This flange is a heavy-duty part that is sold as an individual item. The flange bearing can be used with lawnmowers and other lawn and garden machines manufactured by Craftsman.

17.90-inch high-lift mower blade for lawn tractors and riding mowers. Replace worn, bent, or dull blades to restore cut quality and deck performance.

Clutch control cable for rear-tine tillers. Connects handlebar lever to clutch mechanism. Replace if frayed, stretched, broken, or disconnected.

Control cable for edgers. Connects the handle controls to the engine or blade mechanism. Replace if cable is frayed, broken, stretched, or disconnected.

Control cable for walk-behind mowers. Connects handle controls to engine mechanisms. Replace if frayed, punctured, torn, or damaged for proper operation.

Variable speed control cable for self-propelled walk-behind mowers. Replace if your cable is frayed, broken, or won't engage speed adjustment properly.

Drive control cable for rear-tine tillers. Connects drive engagement mechanism with durable wire and metal end connectors. Replace if broken or worn.

Control cable for gas walk-behind mowers. Connects control lever to mower mechanism. Replace if cable is frayed, broken, kinked, or not engaging properly.

Reverse control cable for rear-tine tillers. Connects the reverse lever to transmission. Replace if cable is frayed, stretched, or broken.

Replacement clutch cable that connects the control lever to the drive clutch on your snow thrower. Needed when the original cable is frayed, broken, or worn.

Steering control cable for gas snowblowers. Connects steering mechanism to handlebars. Replace if cable is frayed, broken, kinked, or disconnected.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

Control cable for gas walk-behind mowers. Installs to operate speed control or drive engagement. Replace if cable is frayed, broken, or stretched.

Fixes snow blower drive issues caused by worn or damaged adapter pulley. Restores proper belt tension and transmission engagement for smooth operation.

Reel spool assembly for gas line trimmers. Holds and feeds trimmer line during operation. Replace if spool is cracked, worn, or missing components.

The drive V-belt, manufactured by Craftsman, is used in one- and two-stage snow blowers as well as tillers. This is a drive belt that connects the engine to the auger of the tiller or snowblower via a pulley at either end. This turns the blades of the tiller or the auger blades of the blower to expel snow. As a flexible, hardened rubber part connecting other moving parts, a V-belt is considered “replaceable,” meaning that users should expect to have to replace this part during normal use of the equipment. Signs that a drive V-belt may be going bad are a squealing sound when the blower's auger or the tiller's blades are first engaged, or if the auger is slow to engage and loses power during use. To replace the V-belt, the equipment must be secured and the spark plug caps removed. Tilt the device to reveal the location of the belt. It must detached from the engine pulley and the transmission pulley. When replacing the V-belt, before tightening the pulley, make sure all moving parts are properly aligned. This genuine OEM part is compatible with machines sold by MTD, Yard Man, Craftsman, and Yard Machine.