Parts for Kitchenaid KDTE204KBS0: Tub And Frame Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replace your dishwasher's junction box cover if the original is cracked, broken, or missing. This cover installs over the electrical connection box.

Fix water leaks at the inlet connection with this dishwasher water inlet tube nut. Secures the inlet tube to the water valve for proper supply.

Fix a dishwasher door that won't stay closed during cycles with this latch strike plate. Simple slide-in installation takes minutes. Restores tight seal.

Replacement screw secures dishwasher panels, brackets, and internal components. Replaces missing, stripped, or corroded fastening hardware.

Drip tray that installs under the front of the dishwasher tub. Collects excess water and rinse aid, protecting internal components. Replace if cracked or worn.

Secures your dishwasher to the underside of the counter. Replace if bracket is broken, cracked, or missing to prevent the unit from shifting forward.

Protective corner cover that installs at the base of the dishwasher tub wall. Replace if cracked, chipped, or damaged from repeated door contact.

Fix dishwasher overflow or no-fill issues with a float switch replacement. Detects water levels and prevents floods. Simple repair for most DIYers.

This small black cap covers a screw or fastener opening inside the dishwasher tub. It provides a finished look and prevents water or debris from collecting in the screw hole. Replace it if the cap is missing, cracked, or no longer stays in place.

Adjustable leveling leg that supports and stabilizes your dishwasher under counters. Replace if cracked, stripped, or unable to hold level position.

Pronged cup washer for securing internal dishwasher components. Provides reliable retaining force for assembly hardware.

Replacement mounting screw for dishwashers and ranges. Secures panels, brackets, and internal components when original hardware is stripped, missing, or corroded.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replacement 8-32-thread screw used to secure panels, brackets and small components in compatible household appliances. Restores missing or stripped fasteners so panels and parts stay firmly attached during normal use. What it does:

• Secures trim, panels, brackets and control housings to maintain proper assembly.
• Replaces missing or damaged screws that can cause rattling, loose panels or misaligned components.
• Fits locations that require an 8-32 threaded fastener; correct length and head style for your application.
• Helps restore stable, vibration-free operation when worn or stripped fasteners are replaced.

• Disconnect power and water before servicing; wear eye protection and gloves.
• Use the correct screwdriver or driver bit to avoid stripping the screw head.
• Do not overtighten—turn until snug and secure to avoid damaging threads or surrounding parts.
• If the original used a washer or nut, reuse or replace as needed and the screw length and head type match the original.

Molded mounting bracket that secures internal dishwasher components and keeps assemblies aligned. Replace if cracked, broken, or causing misalignment.

Structural bracket that secures internal dishwasher components and maintains proper alignment. Replace if cracked, broken, or missing to restore fit.

This insulation and sound shield wraps around the dishwasher tub to reduce noise and retain heat during wash cycles. It helps muffle operating sounds and improves energy efficiency by maintaining water temperature. Replace this part if your dishwasher has become noticeably louder or dishes aren't drying properly.

Replacement tub wheel that supports and guides the washer drum for smooth, aligned rotation. Replace worn wheels to reduce drum noise, rubbing and uneven spinning. What it does:

• Supports and guides the washer drum so it turns smoothly and stays aligned.
• Reduces friction between the drum and cabinet, helping prevent scraping or binding.
• Replace if the drum squeaks, drags, rubs, or wobbles during spin cycles.

• Disconnect power and turn off water supply before servicing the appliance.
• Access may require removing the cabinet, front or rear panel depending on model.
• Inspect adjacent shafts, bearings and mounts for wear and replace if needed.
• Reassemble and test the washer after installation to ensure proper drum movement.

This is a metal mounting bracket used to secure the dishwasher to the underside of the countertop or adjacent cabinetry during installation. It prevents the dishwasher from tipping or shifting when the door is opened or during operation. Replace this bracket if it is bent, broken, or missing, which can cause the dishwasher to move or feel unstable.

Fix a loose heating element with this dishwasher heater terminal nut. Secures element studs to the tub exterior. Simple fix for missing or corroded nuts.

Fix dishwasher not heating or running cycles with this terminal block. Connects electrical wiring to enable heating, pumps, and controls. DIY repair.

The Sound Shield is an OEM part for Whirlpool dishwashers. It is designed to fit around the dishwasher tub and help shield surrounding areas from noise generated during washing cycles. The sound shield works to absorb sound vibrations and maintain a consistent noise level by insulating sensitive components.

Causes of a bad sound shield can include cracks or splits in the insulating material over time, or damage to the shield itself from external impact or stresses.

Symptoms of a bad sound shield include:

• Increased noise levels emanating from the dishwasher
• Discrete rattling or vibrating sounds localized to certain areas
• Failure of the sound shield to perform its insulating functions properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Dishwasher rack track guides and supports the lower or upper rack as it slides. Replace if cracked, bent, or causing rough rolling. Confirm fit with your model.

Secures dishwasher racks to the tub wall for smooth sliding. Replace if cracked, broken, or causing racks to bind. Installs inside tub cavity.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.