Parts for Craftsman 24919: Two Bin Rear Bagger Parts

This upper chute assembly is part of a riding lawnmower bagging system. As the grass is mowed, it is pulled up and through the upper chute, where it is deposited in the grass bag. This is an OEM replacement part sourced directly from the manufacturer. If the upper chute has become damaged due to age or exposure to the elements, this part should be installed to repair the lawnmower.If the upper chute is damaged, grass clippings may not be fully bagged. Cracks in the chute can reduce efficiency, and some of the clippings may remain on the ground or eventually clog the tube. If the bag doesn't appear to be catching clippings after mowing, the upper chute assembly should be inspected. To repair the upper chute assembly, remove the machine's bagger and locate the damaged upper chute. Remove the damaged upper chute and dispose of it. Install the new upper chute and replace the mower bag. This upper chute assembly is a black plastic molded part that is sold individually. It is designed for use on lawnmowers manufactured by MTD and Craftsman.

This replacement part is an upper chute. It is a genuine replacement part made by MTD. This part is used on the outside of many different lawn mowers and protects the parts inside of the machine. This part is made of durable plastic so that it lasts a long time. A new upper chute might be needed if the current one is damaged in any way including being dented, cracked, chipped, or snapped. If the previous part is damaged it is recommended that working gloves be used to prevent injury. This part should be fairly easy to replace and shouldn't require a lot of tools. Be sure the engine is powered down before replacing this part. This is a genuine OEM replacement part and is sourced directly from the manufacturer. This part is sold individually and is only intended for use in lawn mowers.

This carriage bolt is a fastener with a flat tip and a round head with threading along the shank. Also known as coach bolts and plow bolts, the item can be used with many types of lawn and garden equipment. This is a 5/16 carriage bolt that resists turning after the bolt has been tightened. Wear and tear or impact can cause damage to a carriage bolt and lead to the need to replace them.Removing a carriage bolt requires twisting the nut loose from the end of the bolt and then hitting the nut with a hammer. This will begin to move the shoulder out of the lawn equipment. Continue the process until the bolt is loose enough to remove. Installing a new carriage bolt simply requires sliding the bolt into the hole, adding the nut, and tightening things up.This carriage bolt is designed for use with Craftsman, MasterCut, Toro, Yard-Man, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines lawn and garden equipment. It can be used with lawnmowers, chainsaws, snowblowers, edgers, and tillers. This is a genuine OEM product sourced directly from the manufacturer as an individual component.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

This replacement part is a clevis pin intended for use in lawn equipment. This is a genuine replacement part made by MTD. Clevis pins are responsible for keeping different parts in place and secure so that the user is safe while using the appliance. Clevis pins are different from screws in that they attach using a fastening system as opposed to how a screw spins into place. A new clevis pin might be needed if the current one is damaged or broken in any way. It is also possible for the screws to become loose or stripped overtime and will need replacing. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.

This replacement part is a bagger adapter. It is a genuine replacement part made by MTD. This bagger adapter is specifically found in lawnmowers and helps attach the bagger chute to the frame of the lawnmower. This allows for the leaves and other debris to be disposed of through the proper channels.A new bagger adapter might be needed if the current one is damaged or missing. If leaves and debris are escaping the bagging area, it is possible that the adapter is damaged and might need replacing. This should be a fairly easy repair and shouldn't require any uncommon tools. Be sure to reference any user manual provided for more information.This bagger adapter is a genuine OEM replacement part and is sourced directly from the manufacturer so that it fits. This part is sold individually.

This replacement part is a torsion spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. A torsion spring is very common in many different types of machinery and appliances. These types of springs exert a rotary or torque force. This is one of the many parts that allow the engine to run properly and smoothly. A new torsion spring might be needed if the current one is damaged or missing. The most common reason for needing to replace this part is wear and tear. Because this part is very heavily relied on during use, it is common that it be replaced frequently. Be sure to wear work gloves while replacing this part as it could snap and cause injury. This torsion spring is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This genuine replacement part is a MTD flat washer flange sized .339 X .640 inch X .033 inch. This MTD flat metal washer flange has a variety of applications for many types of equipment including lawn mowers, snow blowers, tillers, edgers, and log splitters. Washers are important to the proper functioning of the product. They spread the load of a threaded fastener, such as a bolt or nut, or can be used as a spacer. However, they can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This MTD flat washer flange has multiple applications in a wide range of products from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery, Wards, Bolens, Yard-Man, Turf King, MasterCut, and more. Please note: original part number 166763 is now obsolete, and manufacturer has replaced the original part number with this part.

This replacement part is a washer. This is a genuine replacement part made by MTD. Washers are a very important part of many different types of machinery. These small pieces work together with other small parts to help the pieces of the machine stay in place and secure so that everything operates smoothly.A new washer might be needed if the current one is missing or damaged in any way. Washers can become stripped over time and might not stay in place after a while. If this is the case it is recommended that it be replaced as soon as possible. This repair should be fairly easy and only require a screwdriver and possibly pliers. Be sure to wear work gloves during this repair. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.