Parts for Frigidaire FFRE2233S2E0: Unit Parts

This refrigerator water filter removes common impurities from the ice and water supply so you get cleaner-tasting water and clearer ice. Designed to fit inline/replaceable filter housings used in many Frigidaire refrigerators. What it does:

• Reduces chlorine taste and odor for improved drinking water flavor
• Helps reduce sediment and particulates that can affect ice clarity
• Keeps water flowing properly when replaced as part of routine maintenance
• Addresses symptoms like cloudy ice, bad-tasting water, or reduced water quality

• One replacement refrigerator water filter cartridge

• Replace filter according to your refrigerator manufacturer's instructions; typically twist or push in to seat and lock
• Run several gallons of water through the dispenser after installation to flush the system and remove loose carbon fines
• If water flow is restricted after installation, check filter orientation and seating; do not force
• For safety, disconnect power to the appliance before accessing internal filter housings

This louver is the molded vent trim that directs airflow and covers an appliance air opening, keeping the interior airflow organized and the opening finished. It restores proper venting and the appliance's exterior appearance. What it does:

• Directs airflow from the appliance's fan or vent to help consistent cooling or ventilation
• Covers and finishes an exterior or interior vent opening for a clean look
• Helps keep large debris or objects from entering the vent opening
• Cracked, broken, or missing louvers can cause rattling noises or disrupted airflow

• One louver piece

• Disconnect power to the appliance before starting any work
• Access may require removing trim or a cover panel; keep fasteners for reassembly
• Handle plastic trim gently to avoid cracking; use proper trim tools or a flat tool to pry if needed
• Verify orientation and fit before securing; do not force part into place

This refrigerator door handle provides a stable grip for opening and closing the door and restores the door's original appearance and function. Designed as a direct-fit replacement where this OEM-style handle is specified. What it does

• Replaces a damaged, cracked, or loose refrigerator door handle to restore safe, reliable opening and closing.
• Provides a secure grip and proper alignment for the door during normal use.
• Helps prevent further wear to the door edge and surrounding trim by restoring correct handle function.
• Compatible with factory handle mounting points when the OEM part number matches.

• One refrigerator door handle

• Installation typically requires removing the old handle screws or clips and securing the replacement in the same mounting locations.
• Use appropriate hand tools; avoid overtightening fasteners which can crack the handle or strip threads.
• Keep the door supported during removal/installation to avoid hinge or door damage.
• Turn off power to any nearby components (ice maker lights, etc.) before working.

This handheld remote control lets you operate compatible Frigidaire appliances from a distance, restoring convenient control of modes, temperatures, and timers without touching the main unit. What it does:

• Sends remote commands to the appliance so you can change modes, fan speed, temperature, or timers from across the room
• Replaces a lost, cracked, or unresponsive remote to regain full remote functionality
• Helps when the appliance doesn't respond to the existing remote or when buttons stick or fail
• Uses standard battery power

• One handheld remote control

• Insert fresh batteries and aim the remote at the appliance's IR receiver; check batteries first when troubleshooting
• Re-pairing or simple setup may be required per the appliance owner's manual—follow OEM instructions if prompted
• Keep remote dry and avoid dropping; remove batteries if storing long-term
• Recycle or dispose of old batteries and electronics according to local regulations

This power cord connects your appliance to household power, restoring electrical supply so the unit can run. It's a direct-fit style cord designed to replace a damaged or missing power lead. What it does:

• Provides the main electrical connection from the wall outlet to the appliance
• Replaces frayed, cut, or burned cords that can cause shorts or loss of power
• Helps resolve symptoms such as the appliance not powering on or intermittent power
• Restores a secure plug and strain relief for safe operation

• Always disconnect power at the breaker or unplug the appliance before installation
• Route the cord and secure any strain relief per the appliance's wiring diagram

This electronic control board replaces the oven/range control assembly that manages cooktop and oven functions, restoring reliable control and display operation. It helps stop erratic cycles and restores normal user-interface responsiveness. What it does:

• Controls oven and cooktop cycles, temperature sensing inputs, timers and display functions
• Replaces a failed control that causes no display, unresponsive touchpad/buttons, or inability to start heating
• Regulates relays and signals to burners and bake/broil elements for proper operation
• Works with the appliance's wiring harness and sensors to restore normal electronic control

• One electronic control board (assembly) as pictured

• Disconnect power at the breaker or unplug the appliance before servicing to avoid shock
• Handle the board by the edges and avoid electrostatic discharge; use an ESD strap if available
• Verify connectors and wire harness orientation before removal; take photos to aid reassembly

The Thermistor is an OEM replacement part for Frigidaire room air conditioners. Located within the air conditioner unit, the thermistor accurately monitors and regulates the equipment's internal air temperature. Precisely calibrated at the factory, the thermistor allows the unit to continuously achieve and maintain the preset cooling level preferred by the user. 

Symptoms of a bad thermistor include:  

• Inconsistent or fluctuating room temperatures
• Difficulty reaching or maintaining desired temperatures  
• The control panel shows abnormal temperature readings

Causes can be age-related deterioration of sensing components, moisture exposure damaging circuitry, or loose wiring connections preventing exact temperature measurement over time. This OEM thermistor restores precise temperature control.

Replacing a faulty thermistor prevents improper compressor cycling which wastes energy. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This oven temperature sensor detects the internal temperature and sends readings to the range control so the oven can maintain accurate cooking temperatures. Replaces a failed or intermittent sensor to restore reliable temperature control. What it does:

• Senses oven cavity temperature and provides temperature data to the control board
• Helps the control maintain set bake/roast temperatures
• Common symptom: oven temperature is incorrect or fluctuates during cooking
• Common symptom: cook cycles take too long or oven does not reach set temperature
• Common symptom: oven displays a temperature sensor or sensor fault code

• One oven temperature sensor (1 each)

• Disconnect electrical power to the appliance before removing or installing the sensor
• Handle the sensor carefully to avoid damaging the probe or wiring and ensure proper connector seating
• Inspect wiring and connector for damage; replace if frayed or corroded

This replacement capacitor stores and releases electrical energy to support proper operation of the appliance's circuit. Replacing a weakened or failed capacitor restores reliable startup and smooth performance in the affected component.

• Stores electrical energy and delivers a brief boost during startup as designed by the circuit
• Helps stabilize operation, reducing humming, stalling, or overheating from a weak capacitor
• Common signs include motors that hum but won't start, intermittent operation, breaker trips
• Visual clues of failure: swollen case, leaking oil, or burnt odor

• Disconnect power and verify no voltage is present before servicing
• Properly discharge the old capacitor using safe, approved procedures
• Note wire positions or take a photo; transfer leads to the matching terminals securely
• Mount securely in the existing bracket/strap; keep terminals clear of contact and test operation

This replacement water fill tube routes water from the refrigerator supply to the ice maker, restoring proper ice maker fill and preventing leaks at a damaged or clogged tube. Easy to swap with the original part. What it does:

• Directs water flow from the inlet valve to the ice maker fill cup
• Restores consistent ice maker fills and helps reduce underfilled or overfilled trays
• Replaces cracked, split, kinked, or clogged tubing that can cause leaks
• Works with the refrigerator's existing water supply and mounting points

• Disconnect power and shut off the refrigerator water supply before starting
• Inspect fittings and clamps; replace any worn connectors for a watertight seal
• Route tubing to avoid sharp bends or pinches that could restrict flow

This replacement water supply tube routes water from the refrigerator's valve to the ice maker or dispenser, restoring proper water flow and preventing leaks when the original tube is cracked or blocked. What it does

• Carries water from the inlet/valve to the ice maker or dispenser assembly.
• Restores normal water flow when a damaged or clogged tube causes slow fill or no fill.
• Helps stop leaks and drips caused by cracks, splits or loose connections.
• Compatible with OEM connections and fittings used on affected Frigidaire refrigerators.

• One replacement water supply tube.

• Turn off the refrigerator and shut off the water supply before starting any work.
• Unplug the appliance to avoid electrical shock when accessing internal components.
• Replace only with the exact part number; secure all fittings to prevent leaks.
• After installation, restore water, check for leaks, and run a test fill to verify correct operation.

This condenser coil assembly helps remove heat from the refrigerant so your refrigerator can cool efficiently. A properly working condenser supports normal cooling and helps prevent the compressor from overworking. What it does:

• Dissipates heat from the refrigerant to allow proper cooling
• Helps maintain normal compressor cycling and appliance temperature
• Can cause reduced cooling or an overworking compressor when damaged or clogged
• Works with the refrigeration system; not an electrical or fan motor component

• One condenser coil assembly

• Disconnect power to the appliance before starting any service
• Handle carefully; fins are sharp and the coil can be bent or damaged
• May require removing the rear access panel or toe grille and repositioning nearby components

This scroll is the replaceable spiral element used inside a refrigeration compressor to compress refrigerant and restore proper cooling performance. It's the OEM-design component that engages with the mating scroll to form the compression chambers. What it does:

• Forms the moving or stationary spiral surface in a scroll-type compressor to compress refrigerant
• Restores internal compression when the factory scroll is damaged or worn
• Can help resolve symptoms such as loss of cooling, excessive compressor noise, or failed compression when diagnosis confirms scroll damage
• Works only as part of a compatible scroll compressor assembly; not a standalone drop-in pump solution

• Replacement requires compressor disassembly and reassembly
• Follow OEM torque, alignment, and sealant procedures; improper installation can cause compressor failure
• Observe all safety precautions for handling pressurized refrigerant and electrical components

This blower wheel moves air through the dryer cabinet so clothes dry efficiently and the appliance vents properly. Replacing a worn or damaged wheel restores airflow and helps prevent overheating and long dry times. What it does:

• Spins on the blower motor shaft to draw air across the heating element and through the drum
• Restores proper airflow when a chipped or bent wheel causes reduced drying performance
• Reduces rattling or vibration caused by imbalanced or cracked fins
• Helps prevent overheating and extended cycle times due to restricted airflow

• One blower wheel

• Disconnect power (and gas if applicable) before servicing to avoid electric shock or injury
• May require removal of the dryer front or blower housing and loosening the motor to slide the wheel onto the shaft
• Ensure the wheel is oriented and seated correctly on the motor shaft and that set screws or clips are tightened as required
• Inspect motor shaft and housing for debris; spin the new wheel by hand to ensure free rotation before reassembly

This replacement blade fan moves cold air across the evaporator to help maintain even temperatures inside the compartment. It restores proper airflow for more consistent cooling and helps reduce frost buildup when working with a good motor. What it does:

• Circulates air across the evaporator to distribute cold air through the compartment
• Restores airflow when a cracked, warped, or missing blade reduces cooling efficiency
• Helps reduce uneven temperatures and localized warm spots caused by poor airflow
• Can reduce abnormal noises caused by damaged or unbalanced blades

• One replacement blade fan

• Disconnect power to the appliance before starting any repair
• Remove the evaporator cover/panel to access the fan assembly per your model's service instructions
• Handle the replacement blade carefully to avoid bending the blades or contaminating the evaporator
• If the fan motor or mounting hardware is damaged, replace those parts as well for reliable operation