Parts for Lg LD3653SP: Upper Cavity Parts

This insulator cushions and isolates appliance components to reduce vibration, prevent metal-to-metal contact, and protect parts from wear. It helps stop rattling and keeps mounted components seated properly. What it does:

• Cushions mounted components to reduce vibration and noise
• Provides a non-conductive barrier to help prevent unwanted contact
• Helps maintain proper alignment of panels or assemblies
• Can prevent wear where parts would otherwise rub or chafe

• Disconnect power to the appliance before starting any repair
• Typically installs with simple push-fit or screw mounting; keep existing fasteners if re-using

This single wiring harness connects electrical components to restore power and signal paths in your appliance. It replaces a damaged or worn harness to help appliances operate reliably and safely. What it does:

• Routes power and signal between controls, sensors, and motors
• Replaces frayed, burned, or broken wiring that causes intermittent power or failures
• Helps stop shorts, erratic behavior, or components that won't receive power
• Matches OEM connector ends and wire colors for a direct replacement when the OEM part is specified

• Disconnect power and unplug the appliance before starting any repair
• Compare the harness to the original before installing
• Secure routing to avoid pinching, chafing, or contact with hot surfaces

Replace your wall oven door gasket to restore proper heat seal and cooking efficiency. Install when you notice heat escape or uneven cooking results.

Wall oven not heating or display blank? This main power control board assembly regulates all oven functions. Moderate DIY repair, 1-2 hours with basic tools.

Replace your wall oven's vent assembly if it's cracked, damaged, or missing. This assembly installs at the top or rear to ensure proper ventilation.

Door hinge bracket for wall ovens. Secures and supports the door hinge mechanism. Replace if bracket is cracked, bent, or broken causing door misalignment.

Oven not cooling properly or overheating? This fan assembly restores airflow and temperature control. Includes motor and blade for complete repair.

Replace a broken or damaged motor bracket causing loose or misaligned oven fan motor. Straightforward repair that restores proper motor mounting and support.

Replacement mounting nut for cooktops and ranges. Secures components during installation. Order a new nut if yours is stripped, missing, or damaged.

Fixes power connection issues or arcing at the terminal block. This socket connects your range power cord to internal wiring. Moderate DIY repair.

This is a circular wire harness holder that secures and organizes internal wiring within the range. It clips onto the frame or mounting points to keep wires routed properly and away from heat sources. Replace this part if it is broken or missing, which can cause loose wiring or potential contact with hot surfaces.

Replace your worn range oven door gasket to restore proper heat sealing and improve cooking efficiency. Verify fit with your model number before ordering.

Wall oven stopped moving or cycling intermittently? This AC synchronous motor assembly restores precise rotation and timing. Moderate DIY repair.

Replace your oven's halogen light bulb to restore bright interior lighting. Essential when the bulb burns out or dims. Verify fit with your model number.

This customized screw secures appliance components where a standard fastener won't fit, helping keep panels, brackets and small assemblies stable. It's a direct-fit replacement when the original specialized screw is missing or damaged. What it does:

• Fastens and holds appliance panels, brackets or small parts in place
• Prevents rattling, loose trim or misaligned components caused by a missing or stripped screw
• Matches the OEM fit and thread pattern for proper engagement and alignment
• Used in locations that require a non-standard or customized fastener

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten securely but do not overtighten; overtightening can strip threads or crack parts
• Keep removed hardware organized so you can reinstall in the original location

The Screw is an OEM component specifically designed for LG ranges. It plays an important mounting and fastening role by securely attaching internal components together.

The screws utilized within the range cabinet ensure sturdy construction and reliable mechanical cohesion. They allow for simple assembly and proper alignment of inner parts. 

Causes of bad screws can include wear and tear over time, or damage from overtightening leading to stripped threads or heads.

Symptoms of bad screws include:

• Loose, detached, or misaligned inner parts  
• Hardware that does not fit or interface as designed
• Unintended noises or movement during the operation

This OEM LG replacement part is also compatible with Sears/Kenmore and some GE ranges utilizing similar fasteners. Replacement ensures the range remains mechanically sound.
 

Packing gasket creates a secure seal to prevent leaks and air loss in your oven. Replace if worn, cracked, or damaged to restore proper function. Verify fit.

The convection fan blade is the spinning component inside your oven that circulates hot air evenly throughout the cooking cavity during convection cooking. By moving air continuously, it helps food cook faster and more evenly than standard bake mode. Replace this part if you notice uneven cooking results, longer bake times, or if the fan is making a rattling or grinding noise during operation.

This hardware washer helps distribute fastener load and maintain proper spacing in your LG appliance. Replacing a missing or worn washer restores secure mounting and alignment, reducing vibration and rattling from loose assemblies.

• Distributes the load of a screw or bolt and protects mating surfaces to maintain alignment
• Helps keep components secure and at the correct spacing
• A damaged or missing washer can lead to loosening, vibration, or rattling during operation
• Ensures correct hardware stack-up during reassembly after service

• Disconnect power and shut off water or gas before servicing
• Note the order and orientation of any washers/spacers; take a reference photo
• Use the correct driver or wrench and tighten snugly—do not overtighten
• Replace companion hardware if corroded, stripped, or damaged

Fix an oven with no display or unresponsive controls by replacing the power transformer. Restores proper voltage to control circuitry for reliable operation.

This is a sheath-style heating element mounted at the top of the oven cavity that provides high, direct heat for broiling. It glows red when functioning properly and is responsible for searing and browning food from above. Replace this element if it no longer heats up, heats unevenly, has visible cracks or blistering, or if the broil function stops working entirely.

Oven won't heat, turns off randomly, or completely dead? This power control board manages heating elements and oven functions. Moderate difficulty repair.

The Common Nut is an OEM part for LG ranges. It secures the fan blade to the motor shaft. This nut maintains the fan's stability and preventing it from becoming dislodged during use.

Causes of a bad common nut can include loosening over time due to vibration, improper installation, or damage from impact or mishandling.

Symptoms of a bad common nut include:

• Excessive noise or vibration from the fan assembly
• The fan blade becoming loose or detached, causing poor air circulation
• Potential risk of the fan blade becoming a projectile if completely detached

This OEM LG part is also compatible with some Kenmore models.a

Oven not heating or cooking unevenly? This heating element generates the heat needed to cook food. Common fix for temperature issues in electric ovens.

Replace your burned-out microwave cooktop light to restore bright illumination under your over-the-range unit. Confirm fit by model number before ordering.

This is the motor housing or support bracket that holds the convection fan motor in place inside the oven. It secures the motor and ensures proper airflow for even cooking during convection baking. Replace this housing if it is cracked, warped from heat exposure, or if the convection fan vibrates excessively or sits loosely.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

Fix F9 error code or oven not heating issues. This thermal safety thermostat monitors temperature to prevent overheating. DIY repair in 15-60 minutes.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.