Parts for Ge PS96PZR1SS: Upper Door Parts

This oven back insulation panel fits behind the oven cavity to help contain heat and protect surrounding components. It restores proper thermal shielding so your oven can heat more efficiently and reduces heat transfer to the cabinet. What it does:

• Replaces damaged or missing rear oven insulation to help maintain internal oven temperature and improve cooking consistency.
• Protects wiring, electronics, and exterior cabinet parts from excess heat.
• Can reduce hot spots or higher-than-normal exterior temperatures around the oven.
• Eliminate burning smells caused by insulation deterioration or exposed hot surfaces.

• Disconnect power to the appliance before starting and allow the oven to cool completely.
• Access usually requires removal of the oven back panel or slide-in range rear cover; follow OEM service instructions.
• Handle insulation gently and wear gloves and a dust mask if material is dusty or deteriorated.
• Do not block ventilation openings when reinstalling; ensure panel is seated as OEM intended.

This Cover Vent Trim is the outer trim piece that finishes and protects the appliance vent opening, restoring a clean appearance and helping keep the vent area sealed against debris and dust. What it does:

• Replaces damaged, bent, or missing vent trim to improve the look and fit of the vent opening
• Helps keep lint, dust and large debris from collecting at the vent edge
• Restores proper alignment of the vent opening trim for a secure fit
• Useful when the existing trim is dented, cracked or cosmetically worn

• One cover vent trim piece as shown

• Designed for a direct replacement; check that part number matches the old trim before installation
• Requires only basic hand tools; remove fasteners or clips holding the old trim and secure the new piece in place
• Disconnect power to the appliance before working in the vent area
• If vent damage extends beyond the trim, inspect the vent and surrounding components and replace additional parts as needed

This 10-24 machine screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. Small, service-grade fastener for repeatable repairs and safe operation. What it does:

• Fastens control panels, trim pieces, brackets, or assemblies that use a 10-24 threaded screw
• Restores secure mounting when a screw is missing, stripped, or damaged
• Helps stop panel rattling, misalignment, or intermittent contact caused by loose parts
• Compatible with repair or replacement tasks requiring the standard 10-24 thread size

• Unplug or disconnect power to the appliance before starting repairs
• Use the correct driver or socket to avoid stripping the head; do not overtighten
• Replace only like-for-like 10-24 fasteners to maintain proper fit and thread engagement
• If threads in the receiving part are damaged, repair or replace the mating component rather than relying on a longer or different screw

This is a replacement screw used to secure panels and components on compatible appliances, providing reliable fastening to stop loose parts and noise. It restores proper fit where the original fastener is missing or damaged. What it does:

• Fastens control panels, brackets, or trim to appliance chassis
• Keeps components aligned to prevent rattling or vibration
• Replaces stripped or corroded mounting screws
• Restores secure connections that can cause gaps or poor fit

• Disconnect power before servicing the appliance
• Use the correct-size driver or socket to avoid stripping the head
• Thread in carefully and avoid over-tightening to prevent damage
• Check that the screw seats flush and secures the component fully

This handle mounting bracket secures the appliance handle to the door, restoring a stable grip and normal operation. Replace a cracked or worn bracket to stop a loose, wobbly or detached handle and make the door easier to open. What it does:

• Provides the structural support that fastens the exterior handle to the appliance door
• Stops handle wobble or play caused by a broken or worn bracket
• Restores proper handle alignment and secure attachment
• Helps prevent further damage to the handle or door trim by replacing a failing mount

• Unplug the appliance or disconnect power before beginning any repair
• Remove the handle and any trim to access the bracket; keep mounting screws for re-use unless replacement screws are specified
• Install bracket with correct orientation and torque; avoid overtightening to prevent cracking

This bracket handle is the replacement mounting bracket that secures a refrigerator/freezer door handle, restoring proper handle alignment and support. It helps stabilize the handle and prevent movement or looseness for reliable daily use. What it does

• Secures the door handle to the appliance cabinet so the handle stays firmly in place
• Restores correct handle alignment and feel after a broken or worn bracket
• Reduces handle wobble, prevent further damage to the handle or door
• Matches OEM fit and form for direct replacement where this bracket is specified

• Basic hand tools required; remove power and empty door pockets before starting
• Follow OEM disassembly steps to avoid damaging trim or the door finish
• Keep hardware and screws from the original assembly; replace only with manufacturer-specified fasteners

This oven door inner insulation cushions the inner door panel and helps maintain proper cooking temperatures while reducing heat transfer to the outer door. Replaces damaged or missing insulation to improve heating consistency and help keep the exterior cooler. What it does

• Fills the cavity behind the oven door's inner panel to limit heat loss and stabilize internal temperatures.
• Helps reduce outer door surface temperature for safer handling during and after use.
• Reduces drafts and uneven cooking caused by compromised or missing insulation.
• Works with the door inner panel and outer door assembly to restore proper sealing and performance.

• One door insulation

• Remove power to the appliance and allow the oven to fully cool before beginning work.
• Handle carefully to avoid tearing the insulation; use caution around sharp sheet metal and door glass.
• Follow manufacturer service manual or OEM instructions for door disassembly and reassembly.

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold