Parts for Electrolux E30EW85ESS1: 05 - Upper Oven Parts

Broiler pan rack for electric ovens and ranges. Replaces cracked, warped, or missing racks. Installs inside broiler pan for elevated cooking.

Oven rack glide and support kit ensures smooth rack sliding and proper support. Replace when racks stick or wobble. Verify compatibility with your model.

Oven rack glide and support kit ensures smooth rack sliding and proper support. Replace when racks stick or wobble. Verify compatibility with your model.

Broiler pan for electric and gas ranges. Installs in oven cavity for broiling. Replace if cracked, warped, rusted, or heavily stained beyond cleaning.

This broiler insert is the oven pan insert that sits under the broiler burner to catch drips and help direct heat for even browning. It restores a stable cooking surface and keeps the broiler area cleaner. What it does:

• Holds food and catches grease and drips during broiling to prevent mess and flare-ups
• Directs heat from the broiler for consistent browning and searing
• Replaces damaged, warped, or corroded inserts that cause uneven cooking
• Helps prevent food from falling into the burner area

• One broiler insert

• Disconnect power to the appliance and allow the oven to cool completely before servicing
• Remove oven racks and slide the old insert out; position the new insert so it seats securely in the broiler cavity
• Wear heat-resistant gloves when testing the broiler after installation and inspect for proper fit before use
• Do not modify the part; use only as designed for the oven broiler assembly

This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.

• Directs power to the associated circuit when switched on or off
• Common symptoms: function won't turn on/off, intermittent operation, or the switch feels loose/sticks
• Helps restore positive, consistent control from the backguard/control panel

• Disconnect power at the breaker before servicing
• Access the switch from the control panel/backguard; retain screws/clips
• Label/photograph wire positions and transfer leads one at a time to the new switch
• Ensure firm terminal connections, reassemble, restore power, and test operation

Replacement oven door hinge bushing. Supports smooth door operation and prevents binding. Replace if door sags or squeaks. Verify fit with your model.

Fix F1, F3, or F10 error codes and inaccurate oven temperatures with this sensor. Simple DIY replacement takes about 30 minutes with basic tools.

This is the radiant surface heating element that powers one burner on a glass-ceramic cooktop. Replacing a failed element restores fast, even heat and reliable temperature control for everyday cooking.

• Converts electrical energy into heat for a single cooktop zone
• Works with the burner control to cycle on/off and maintain temperature
• Common symptoms include no heat, intermittent heat, or very slow heating
• Visible hot spots, blisters, or cracks on the element indicate failure

• Disconnect power to the range/cooktop before servicing; high voltage is present
• Allow the glass top to cool; lift or remove it to access the element as your model requires
• Transfer wires one at a time to the new element; secure using existing brackets/mounts
• Ensure the element is centered under the glass and test operation before reassembly

Oven won't heat to temperature or heats unevenly? This bake element provides consistent heat for proper baking. Easy 15-minute DIY repair—just 2 screws.

Secures cooktop surface elements to your range for stable contact and even heating. Replace if bent or worn to restore proper element positioning.

Replace your oven's door bumper if cracked, worn, or missing. This cushioning component protects the door frame and ensures a proper seal when closed.

Mounting plate that secures the oven to the cabinet or wall. Replace this metal support plate if it's bent, rusted, or missing to ensure proper installation.

This refrigerator interior liner replaces a damaged or worn plastic shell that forms the cabinet's inside surface and supports shelves and drawers. Restores a clean, sealed interior for proper storage and easy cleaning. What it does:

• Serves as the interior wall and mounting surface for shelves, bins, and trim
• Covers insulation and structural cavity to help maintain proper airflow
• Replaces liners that are cracked, warped, or gouged and causing hygiene or fit issues
• Helps prevent items from contacting insulation or wiring behind the wall

• Disconnect power and remove food, shelves, and removable trim before starting
• Replace using manufacturer-approved fasteners and follow OEM alignment so doors and drawers fit correctly
• Handle carefully to avoid cracking; some adhesives or clips may be used depending on model

This receptacle is the appliance electrical connector that provides a secure plug-in point for a wiring harness or component, helping restore reliable power transfer and proper operation. What it does

• Provides a secure electrical connection between a wiring harness and the component it serves
• Restores a solid plug-in interface when a connector is cracked, loose, or corroded
• Can cause intermittent power, component failure, or no power when worn or damaged
• Designed to mate with the matching harness or component socket for a stable connection

• Disconnect power to the appliance before inspecting or replacing the receptacle.
• Handle wiring and terminals carefully; avoid bending or damaging pins during installation.
• Ensure the mating connector is fully seated and any retaining clips or fasteners are engaged.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.

Oven won't heat or can't hold temperature? This thermal switch monitors oven temperature and protects internal components. Common fix for heat issues.

Adapter assembly for oven vent system. Installs in back wall to align vent components. Replace if cracked, broken, or missing to restore proper fit.

Replace your oven's broken or missing rack spring. This small metal spring helps support and stabilize oven racks during sliding and positioning.

Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.

Oven won't heat or bakes unevenly? This bake element restores reliable heat for even cooking. Direct replacement part—most DIYers complete in 30 minutes.

Positions and supports range components to maintain proper alignment. Replace if cracked, broken, or missing to prevent rubbing and ensure panels fit correctly.

This replacement mounting bracket secures internal components or panels to the appliance frame for proper alignment and stable operation. It restores a solid attachment point to reduce movement and prevent noise or part misalignment. What it does:

• Provides a secure mount for internal assemblies or trim panels.
• Keeps components aligned to prevent rubbing, rattling or vibration.
• Restores proper fit where a bent, broken or missing bracket caused loose parts.
• Helps maintain safe operation by keeping wiring and piping routed away from moving parts.

• One mounting bracket.

• Disconnect power to the appliance before beginning any repair.
• Basic hand tools commonly required; handle edges carefully to avoid cuts.
• Inspect surrounding fasteners and replaced parts; reuse original screws only if in good condition.

Spacer bumper for cooktops and ranges. Installs between components to provide proper clearance and prevent vibration. Replace if worn or missing.

Replacement mounting screws that secure your cooktop to the countertop or cabinet. Essential when original screws are stripped, missing, or damaged during installation or service.

Size: 3/4 inch od x 1/4 inch id.

This decorative trim piece finishes the appliance's exterior for a clean, factory look and helps conceal gaps or fasteners around the control or access area. It restores the original appearance after repair or replacement. What it does:

• Provides a finished, factory-style edge to cover seams or fasteners
• Helps prevent dirt and debris from collecting in exposed seams
• Restores the appliance's original visual appearance after part removal or repair
• Fits into place to align adjacent panels for a flush look

• One decorative trim piece as shown

• Typical installation requires removing the adjacent panel or door; retain all mounting hardware
• Align trim into position and secure with existing screws or clips; do not overtighten
• Wear gloves to protect finishes and avoid fingerprints during installation
• If any clips or fasteners are damaged or missing, replace them before final installation

This part has been discontinued by the manufacturer and is no longer available.

Mounting screw for electric range, oven, or wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged.

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.