Parts for Kitchenaid KDTM604KPS1: Upper Rack And Track Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This is the upper dish rack assembly that slides in and out of the dishwasher on rails and holds cups, glasses, and smaller items during the wash cycle. It includes the rack frame with tines and support bars for organizing dishes. Replace this rack if the tines are broken, the coating is peeling and causing rust, or the rack no longer slides smoothly on its tracks.

The Tine Clip is an OEM part specifically designed for Whirlpool brand dishwashers. This small but important piece secures individual tines to the upper dish rack for stability during washing.

Repeated use causes plastic clips to become brittle or dislodge over time from heavy loads. This jeopardizes proper rack assembly and performance. 

Causes of a bad tine clip could be normal wear and tear, damaged pads from sharp dishes, or improper loading of heavily soiled cookware.

Symptoms of a failing tine clip include:

• Loosened or detaching dishrack tines that shift positions 
• Gaps allowing collected food and particles to fall through
• Reduced support for delicate or small dishes in affected areas

This OEM Whirlpool replacement restores the rack's fully functional design. Compatible with Maytag, KitchenAid, Jenn-Air, and other models, it improves washing coverage and optimizes usable space.
 

If your dishwasher spray arm wobbles or doesn't rotate properly, the positioner may be worn. This part centers and stabilizes the spray arm for proper water distribution.

Replacement clip that secures the adjuster arm assembly in your dishwasher. Needed when the original clip is broken, cracked, or missing.

Fix rattling or misaligned parts with this dishwasher mounting bracket. Secures internal components to reduce vibration and restore proper positioning.

Right-side upper rack adjuster for dishwashers. Mounts to the rack system to raise or lower the upper rack and maintain level alignment. Replace if broken, cracked, or missing.

This is the left-side rack adjuster and wheel assembly for the middle dishwasher rack. It allows you to raise or lower the rack height to accommodate different dish sizes and ensures the rack slides in and out smoothly. Replace this part if the rack is difficult to slide, sits unevenly, tilts to one side, or the wheels are cracked or broken.

This is a rail track that supports and guides the 2nd and 3rd level dish racks as they slide in and out of the dishwasher. It mounts inside the tub and allows smooth movement of the rack assemblies. Replace this part if the dish racks are difficult to slide, sit unevenly, or if the existing rail is cracked or broken.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Replaces a broken or missing dishwasher rack tine. Snaps into the lower or upper rack to restore adjustable dish support. Ideal for cracked tines.

Retainer clip secures wiring, tubing, or trim panels inside your dishwasher. Replace if cracked, broken, or missing to prevent loose components from shifting.

The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This clip functions to hold the upper dish rack in place during washing cycles.

Symptoms of a bad dishrack stop clip can include:

• Movement or vibration of the upper dish rack during washing
• Visible damage, bending or broken tabs on the mounting clip itself  
• Inability to smoothly slide or remove the upper dish rack

Causes of a bad dishrack stop clip usually stem from normal wear and tear over extended use. Overtight loading of dishes could also put excessive stress on the clip.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Secures the sliding dishwasher rack at the rear of the tub. Replace if your clip is cracked, broken, or missing to keep the rack properly positioned.

Replace cracked or worn dishwasher dishrack wheels that guide the upper rack in and out smoothly. Single wheel for convenient loading and unloading.

Replacement mounting screw for dishwasher panels, brackets, and trim assemblies. Secures loose or missing fasteners on internal and external components.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.