White Westinghouse Dryer Bearing Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281153
The Rear Drum Bearing Kit is an OEM replacement part for Frigidaire dryers. It contains a set of parts responsible for supporting the rear end of the dryer drum, allowing it to rotate smoothly and efficiently during the drying cycle.
Symptoms of a faulty Rear Drum Bearing Kit include:
- Excessive noise or grinding sounds coming from the rear of the dryer
- Difficulty in rotating the drum or drum not turning at all
- Visible signs of wear or damage on the existing bearings
- Increased vibrations or shaking during the drying cycle
Causes of needing to replace the rear drum bearing kit can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.
NOTE: The metal plate holes are not threaded. Use the self-tapping screws provided in the kit to thread the plate.
This part fixes the following symptoms
-
Noisy
-
No heat or not enough heat
-
Marks left on clothes
See more...
Do-It-Yourself Stories from Customers like You
After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing.
I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation.
I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years...
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 131825900
The Dryer Drum Bearing is an OEM part for Frigidaire dryers. It supports the dryer drum, ensuring smooth rotation during the drying cycle. This part attaches to the inside of the rear panel of the cabinet, offering support to the dryer drum.
You should replace the drum bearing if it becomes worn out or damaged. Causes of a bad drum bearing can include normal wear and tear, overloading the dryer, or lack of lubrication.
Symptoms of a bad drum bearing include:
- Loud squeaking or grinding noises during operation
- The drum not turning smoothly or becoming misaligned
- Increased friction causing overheating or burning smells
- The dryer not tumbling clothes properly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Marks left on clothes
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible.
Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem.
Next step was to...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 131777700
The Rear Drum Support Shaft is an OEM part for Frigidaire dryers, specifically designed to ensure the stability and smooth rotation of the dryer drum. This component plays a pivotal role in the dryer's operation by supporting the rear of the drum, allowing it to turn evenly and quietly during cycles. Note: The rear drum bearing kit is 5303281153.
The causes behind these issues often stem from normal wear and tear, excessive loads that strain the dryer's components, or lack of regular maintenance. Over time, the support shaft can wear down, become loose, or even corrode, leading to operational inefficiencies and potential damage to the dryer.
Symptoms of a failing Rear Drum Support Shaft include:
- Unusual noises, such as thumping or squeaking, during operation
- The dryer drum struggling to rotate or not rotating at all
- Increased wear on other components, such as the belt or motor, due to improper drum alignment
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible.
Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem.
Next step was to...
Read more
More
$113.73
- Compare At:
-
$136.48
- You Save:
-
$22.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281019
The Ball is an OEM part for Frigidaire dryers. This part helps the drum to rotate smoothly and evenly. It provides a stable and low-friction contact point, allowing the drum to turn efficiently during drying cycles. This is a drum-bearing ball only. For a complete drum bearing and shaft kit order 5303281153.
Causes of a bad ball can include regular wear and tear, friction from continuous drum rotation, or physical damage.
Symptoms of a bad dryer ball include:
- Squeaking or grinding noises during operation
- The drum not rotating smoothly or becoming unbalanced
- Increased friction leading to higher energy consumption
- Visible wear or damage to the ball
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019
I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros.
Read more
More
$12.95
- Compare At:
-
$15.28
- You Save:
-
$2.33
White Westinghouse dryer bearing replacement parts are essential for maintaining the efficiency and performance of your dryer. Imagine your dryer running smoothly, load after load, thanks to these critical components. Bearing parts in your White Westinghouse dryer play a vital role in reducing friction and ensuring the drum spins effortlessly. Without them, your appliance would struggle to perform, potentially leading to more significant issues down the line.
White Westinghouse dryer parts are meticulously designed to match the precise requirements of your dryer model. Opting for OEM (Original Equipment Manufacturer) replacement parts guarantees you're getting the quality and compatibility needed to keep your dryer running at its best. These bearings are engineered to endure the rigors of daily use, ensuring durability and long-lasting performance.
Whether you're a DIY enthusiast or calling in a professional, knowing that you can rely on the availability and quality of White Westinghouse dryer bearing replacement parts helps keep your dryer in top shape. With these reliable parts on hand, you can rest easy, knowing your dryer is always up for the task.
More