White Westinghouse Dryer Gasket & Seal
Genuine Frigidaire part
By: Frigidaire
Part Number: 137513300
The Drum Glide is an OEM part for Frigidaire dryers. It is designed to support the front of the dryer drum as it rotates, allowing the drum to turn smoothly with minimal friction and noise. This is a single glide. Your dryer uses two so it is recommended to replace both at the same time.
Causes of a bad drum glide can include wear and tear from regular use, excessive loads that put undue strain on the drum and its components, or accumulation of lint and debris that can interfere with the glide's movement.
Symptoms of a bad Drum Glide can include:
- Unusual noises, such as screeching or squealing, during operation
- Increased difficulty in turning the drum, leading to longer drying times or incomplete cycles
- Visible wear or damage to the glide itself, indicating it is time for a replacement
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937182
The Upper Felt Seal is an OEM part for Frigidaire dryers. It provides a seal between the dryer drum and the front panel, helping to retain heat and ensure efficient drying performance. This felt seal also minimizes friction between the drum and the front panel, reducing wear on the drum and the appliance itself. The seal measures approximately 16.5" long x 1" wide. The adhesive is included as well.
Causes of a bad upper felt seal can include wear and tear over time, exposure to high heat, or damage from foreign objects caught in the drum. A compromised felt seal can lead to inefficient drying and increased energy consumption.
Symptoms of a bad upper felt seal include:
- Clothes taking longer to dry
- Excessive lint accumulation inside the dryer
- Unusual noises during the drying cycle
- Visible damage or gaps in the felt seal
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Also available in maintenance kit: Part Number 5304457724.
Do-It-Yourself Stories from Customers like You
Dryer makes thumping noise when rotating and catching buttons zippers and snaps and ripping them off Rodney H. • Pike Road , AL • September 23, 2014
Replaced the upper and lower felt strips and drum glides. Dryer running much quieter and not tearing clothes.
Read more
More
$28.95
- Compare At:
-
$34.74
- You Save:
-
$5.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 134440200
The Upper Felt Seal is an OEM part for Frigidaire dryers. This felt seal is located at the top edge of the dryer drum and is designed to create a tight seal between the drum and the dryer cabinet. This helps prevent clothes from getting caught in the gap and ensures efficient drying by maintaining proper airflow within the drum. For High Temp adhesive order part number: [AP2153130].
Causes of a bad upper felt seal can include regular wear and tear from frequent use, friction and heat exposure over time, and damage from foreign objects inadvertently caught in the dryer. A compromised seal can lead to inefficient drying, increased wear on clothes, and potential damage to the drum.
Symptoms of a bad upper felt seal include:
- Clothes getting snagged or torn during drying
- Unusual noises such as squeaking or rubbing from the drum area
- Decreased drying efficiency or longer drying times
- Visible wear, thinning, or detachment of the felt seal
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Constant beeping no heat Amy N. • Pike Road , AL • March 27, 2018
My 12 year old Frigidaire stack on top dryer had been beeping distress messages in some unintelligible code for about a year when it completely stopped producing heat. It also had a long standing issue with delicate fabrics and thin straps or drawstrings getting caught in the drum. After using this site to troubleshoot and viewing the useful how-to videos, I ordered and replaced the heating element, thermal limiter, and felt seals. Based on others' stories, I decided to also replace the rear...
Read more
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937139
The Front Felt Glide Assembly is an OEM part for Frigidaire dryers. This part allows smooth operation of the dryer drum, providing a felt pad that the drum glides on as it rotates. This not only helps to support the drum but also minimizes friction and noise, contributing to the efficient and quiet operation of the dryer.
Over time, the felt portion of the glide assembly can wear down, leading to increased friction between the drum and the dryer's front panel.
Symptoms of a bad Front Felt Glide Assembly include:
- Unusual noises during operation, such as squeaking or grinding
- The dryer drum may catch or hesitate during rotation
- Increased wear and tear on clothing due to the drum's rough movement
- The dryer may take longer to dry clothes efficiently due to the drum's impaired rotation
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More