Whirlpool W11808483 Head-Filtr OEM Part

Fixing it was extremely easy, I just followed the instructions provided in the AppliancePartsPros video. After getting the part I simply shut off the water to the fridge, unhooked the part's water lines, unclipped the head inside the fridge, installed the new one and reconnected the lines. Took about 15 minutes and likely saved $300 (what a service person would have charged). It was simple.

Starting off with I made my own problem as I did not replace the filter in over two years. I started the repair by replacing the filter. Solved it for a couple of days then the issue returned. Then purchased the filter Head from Appliance Parts Pros, who had a very informative video on how to replace the filter Head. After replacing the filter head the issue is gone and has not returned after a few days of use. I'll be replacing the filter regularly from now on.

Replaced water filter head. Had some difficulty removing tube from quick grip collar.

My fridge had a loud noise when getting water, low water flow. I replaced the water filter head and everything was addressed. It worked perfectly, quick and easy repair. I needed the block-fill foam piece, since the original one broke during the repair. Shipping was fast. The repair video from Appliance Parts Pros helped a lot too. Thanks!

Installed new water filter head following APP video. My filter holder was actually somewhat different but a quick study (best done with at least one shelf below removed), allowed easy release of the existing part. Rear arrangement of the water lines didn’t match 100% but it is a simple 2 line part and no way to install incorrectly. TIP: make sure you push the plain end tube firmly into place in the locking collar, it will bottom out. If not you may get a little wet. LOL. Time approximately 40 min due to slightly different arrangement and “ciphering’” time, plus you need to allow cleaning time to make the work area a dust free zone.