Whirlpool Mixer Parts

This kit replaces the slide-style speed selector lever on a stand mixer, restoring smooth, positive speed selection. Use it when the selector is cracked, loose, or missing so you can reliably choose and maintain mixing speeds. What it does:

• Provides the external speed-selector interface for your mixer
• Links to the internal control so speeds change as you move the lever
• Helps with symptoms such as a broken/missing lever, difficulty changing speeds, or the selector not staying in position
• Restores a firm, positive feel when selecting speeds

• One speed control lever kit

• Unplug the mixer before servicing and remove any attachments/bowl
• Remove the rear cover/end cap to access the control area
• Note the lever's orientation and any spring/retainer positions; transfer parts carefully and secure fasteners
• After reassembly, test speeds starting on low

Restore your stand mixer's drive system with this gearcase. It serves as the transmission, routing motor power to the planetary while enclosing and supporting the gears for smooth, consistent mixing performance. What it does:

• Directs motor power through the gear train to the planetary/attachment hub
• Encloses, supports, and aligns the gears; retains transmission grease
• Helps address grinding/rumbling, grease leaking from the mixer head, weak or stalled planetary, or excessive vibration

• 1 gearcase

• Unplug the mixer; remove bowl and attachments; protect the work area from grease
• Remove the motor head cover and fasteners; separate the case and note gear stack orientation
• Transfer gears/seals as needed and repack with food-grade grease if servicing the gear train
• Reassemble, tightening screws evenly; test at low speed before normal use

This gearcase is the main transmission assembly that transfers motor torque to the washer's tub and agitator, restoring normal agitation and spin performance when the original gearcase fails. What it does

• Converts motor rotation into the gear reductions needed for agitation and spin cycles.
• Commonly replaced for symptoms like no agitation, slow or failed spin, grinding or clunking noises during cycles.
• Contains internal gears and bearings that can wear or break, causing irregular movement or loss of drive.
• Works with the washer's motor coupling and drive components to re-establish reliable drum motion.

• One gearcase (transmission) assembly.

• Disconnect power and water supply before beginning any repair.
• Support the washer cabinet and tub when removing the old gearcase to avoid damage or injury.
• Gearcase assemblies are heavy and contain grease—expect some lubricant exposure; clean hands and work surfaces after installation.
• Use model-specific service manual or exploded parts diagram for proper alignment and reassembly; replacement may require transfer of seals or mounting hardware.

A replacement whip wire that restores the electrical connection between the appliance wiring harness and the power/element circuit for reliable operation. Helps address intermittent power, poor connections and arcing at the connector. What it does:

• Provides a dedicated insulated lead to carry voltage between the main harness and the controlled component
• Replaces cracked, burned or frayed wiring that can cause intermittent power or component failure
• Eliminates loose or corroded connector ends that create poor contact or arcing
• Restores a safe, secure electrical connection when the original wire or terminal is damaged

• Disconnect power at the breaker or unplug the appliance before starting any work
• Secure wire away from moving parts, sharp edges and high-heat surfaces using existing clips or fasteners

This threaded nut is a genuine fastener used to secure appliance components and restore proper attachment. It replaces worn or missing hardware to stop loose parts and help the appliance function safely. What it does:

• Secures panels, brackets, and assemblies to prevent rattling or movement
• Restores proper thread engagement for stable mechanical connections
• Prevents components from working loose during operation
• Useful when replacing stripped or missing nuts that cause vibration or misalignment

• Disconnect power to the appliance before beginning any repair
• Match nut thread size and type to the mating bolt or stud before installation
• Tighten with the correct socket or wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit

This 6 Wire Whip incorporates air into ingredients for fluffy whipped cream, perfect for frostings and cakes with whipped egg whites. Fits KitchenAid 3.5 Quart Tilt Head models KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.

This pin guard is a small replacement guard that protects and secures a hinge or pivot pin on compatible Whirlpool appliances, helping the door or drawer operate smoothly and stay aligned. It prevents metal-on-metal wear and keeps the pin seated. What it does:

• Covers and protects a hinge/pivot pin from wear and damage
• Keeps a hinge pin seated to reduce door/drawer wobble or misalignment
• Helps minimize noise from a loose or rubbing hinge
• Commonly replaced when a guard is cracked, broken, or missing

• One pin guard

• High-level replacement—usually snaps or slides onto the hinge/pin; no special tools typically required
• Disconnect power (and water if applicable) before working near electrical or water connections
• Inspect the hinge pin and surrounding parts; replace damaged pins or fasteners as needed for a secure fit

A replacement trim band that restores the finished edge around the appliance door or front frame for a clean, factory appearance. Helps protect the cabinet edge and keeps the panel aligned for smooth operation. What it does:

• Covers and finishes the door or front-frame edge to restore original appearance
• Helps hold the panel trim in place and prevents gaps or rubbing at the edge
• Reduces the chance of snags on clothing or items near the door opening
• Useful when trim is cracked, bent, or cosmetically damaged

• Disconnect power to the appliance before beginning any work
• Remove the outer panel or door trim per the service manual to access the trim band
• Replace the band carefully to avoid damaging adjacent trim or painted surfaces
• Use appropriate hand tools and follow OEM instructions

The Wire Whip works with 6 Quart KitchenAid Bowls and quickly incorporates air into ingredients for fluffy whipped cream, perfect boiled frostings and cakes with whipped egg whites. Fits KitchenAid 6 Quart models KF26M1, KF26M2, KP26M1, KSM6521 and 5KSM6521.

This lever latch is the replacement latch used to secure and release the appliance door or access panel, restoring proper door engagement and user operation. It fits the OEM latch location and matches the original white/storm-gray finish. What it does:

• Replaces a broken, cracked or worn latch lever that prevents the door from closing or latching securely
• Restores smooth open-and-close action for the affected door or panel
• Prevents rattling or misalignment caused by a damaged latch
• Matches the original finish to maintain the appliance appearance

• One lever latch (white/storm-gray), as shown

• Disconnect power to the appliance before beginning any repair
• Remove the damaged latch and install the replacement using the factory mounting points; fasteners or clips may be required depending on model
• Handle small plastic parts carefully to avoid breakage during installation
• Refer to your model-specific parts diagram or service manual for exact removal and reassembly steps

This blender drive rod transfers motor rotation to the blade assembly so your blender mixes ingredients efficiently. It's a direct-replacement part that restores proper coupling between the motor shaft and blender jar. What it does:

• Connects the motor's output to the blender blade assembly so the jar rotates and blends
• Restores reliable transfer of torque when the original rod is bent, worn, or broken
• Helps eliminate slipping, wobbling, or inconsistent blending caused by a damaged rod
• Works as the mechanical linkage inside countertop blender units that use a removable jar/drive system

• Disconnect power before servicing and remove the blender jar and blade assembly
• Inspect seals, couplers, and adjoining components for wear; replace damaged parts as needed
• Reassemble carefully, ensuring the rod seats correctly in the drive coupler and blade assembly
• Test on low speed first to ensure proper engagement and quiet operation

Coated Dough Hook for KitchenAid Bowl-Lift Stand Mixer 7 Quart Bowl. The Coated Dough Hook is used to mix and knead yeast dough with ease, saving time and effort of hand kneading. It is dishwasher safe on the top-rack and fits KitchenAid Stand Mixer models KSM7581, KSM7586, 5KSM7581, 5KSM7586, 5KSM7591, 7KSM7586.

Flex Edge Beater is used with 3.5 Quart KitchenAid Tilt Head Stand Mixers. The Flex Edge Beater is designed to reduce mixing time when mixing with this beater. The beater features a flexible edge that thoroughly scrapes ingredients from the sides of the bowl and fits KitchenAid Stand Mixer models KSM3311 and KSM3316.

This Coated C-Dough Hook mixes and kneads yeast dough with ease, saving you both the time and effort of hand kneading. The dough hook is top-rack dishwasher safe. Fits models KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.