Clinton D Clarksville , VA November 05, 2018 Appliance: Maytag Slide-In Electric Range JES9800CAS00 Several keys did not work on my Jenn Air electric stove Reseated ribbon cable; did not fix problem. Replaced front control panel which fixed stove. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Timothy E Waterford , MI November 05, 2017 Appliance: Maytag Slide-In Electric Range JES9800CAS01 Control panel on jenn air stopped working It was very easy. First, researched the problem online and found a great video on YouTube which clearly showed the same problems we were having. Went to AppliancePartsPros.com and ordered the new Front Control Panel for about $230 along with a new oven door gasket for about $20 (YouTube video talks about how heat escapes quite easily and it is best to replace the gasket often). To replace the control panel you have to remove 2 side screws (1 on each side likely hidden by the counter) and 4 ratchet screws on the underneath. From there, you just remove the control knobs and 2 screws for each, slide the light indicators that show the burner is on, pop out the little red plastic pieces, unplug the control panel and remove the 4 screws. All-in-all, it takes about 30 minutes and probably saves at least $100 of labor doing it yourself. Additionally, if you have a down draft model, no matter how much Jenn-Air/Whirlpool screwed up the slide in range by putting it close to where the heat escapes, paying out $250 to replace these parts every 4-5 years is still cheaper than $3000 for a new model. Range works perfectly and looks still rather new so not going to spend money to replace the range any time soon if I can help it. Good luck, it is easy and worth the quick repair. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers, Socket Set
Mark P Elko , NV December 17, 2016 Front control panel was broke Replaced panel Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Horace B Shreveport , LA September 25, 2018 Oven control display failed. Ordered replacement display and installed. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Justin H Sheridan , WY August 10, 2016 The problem was key pad got wet and quit working How i fixed it was got on to your web site, put in the right info and found the right part it came two days later i installed it and it worked good Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers