Whirlpool Range / Cooktop / Oven Gas Conv Kit Parts

This conversion orifice spud kit contains three precision orifice spuds used to change the gas flow profile for compatible cooktop/oven burners. It helps restore correct burner flame size and performance after a fuel-type conversion. What it does:

• Replaces worn or incorrect orifice spuds to set proper gas flow for burner operation
• Used in fuel-type conversion to match burner jets to the correct gas pressure/type
• Can resolve uneven or weak flames and burners that won't reach expected heat
• Works with each burner where a standard orifice spud is specified

• Turn off gas supply and disconnect power before servicing; follow all safety procedures
• Installation may require burner removal and a proper wrench or driver for the spuds
• After installation, check all fittings for leaks using a gas leak detector or soapy water

This orifice is a small gas flow fitting for a range or cooktop burner that helps regulate fuel delivery for proper flame performance. It restores correct burner operation when the existing orifice is clogged or damaged. What it does:

• Controls the amount of gas delivered to a specific burner for correct combustion
• Helps restore even, steady flame or consistent heat output
• Commonly replaced when burners sputter, produce weak flames, or will not light reliably
• Works as a direct-fit replacement for the matching OEM orifice on compatible gas ranges/cooktops

• One orifice

• Turn off the gas supply and unplug the appliance before beginning service
• Use correct-sized wrenches and avoid overtightening; follow OEM torque if available
• After installation, check all connections for leaks with a soap solution or approved gas leak detector

NAT to LP gas conversion kit

This orifice spud directs gas flow into the burner for consistent ignition and flame control. It restores proper burner performance so cooking heats evenly and burners light reliably. What it does:

• Seats the burner orifice to control gas flow to the burner
• Helps maintain a steady, even flame for consistent cooking
• Can resolve weak or uneven flames and burners that struggle to light
• Works as the sealed interface between the gas manifold and burner tube

• One orifice spud

• Turn off the gas supply and disconnect power before servicing
• Inspect surrounding seals and gaskets for damage and replace if necessary
• Use basic hand tools; avoid overtightening to prevent damage

This orifice spud directs gas flow to a burner for correct flame performance, restoring safe, consistent ignition and heat. It's a direct-replacement component used where the factory orifice has become damaged or worn. What it does:

• Controls the gas flow to a specific burner for proper flame size and combustion
• Helps restore consistent ignition and even heating when a burner burns low or unevenly
• Can stop symptoms like weak or unstable flames and uneven cooking
• Does not alter appliance settings—matches OEM flow characteristics when installed

• Turn off the gas supply and power to the appliance before starting any work
• Use appropriate tools and thread sealant rated for gas joints if required by the manufacturer
• After installation, check all connections for leaks with a soap solution or approved leak detector
• Gas-system repairs are safety-sensitive; perform the replacement

This orifice spud is the small gas jet used in LP conversion kits to regulate propane flow to a burner, helping restore correct flame size and combustion after converting to liquid propane. It's a direct-fit component for affected burners. What it does:

• Replaces the burner jet that meters propane for safe, consistent flame
• Restores proper flame height and prevents oversized or sooting flames after LP conversion
• Helps burners light reliably and maintain even heat
• Works as part of an approved LP conversion to match appliance fuel type

• Turn off gas supply and power before starting any gas appliance service
• Use the correct orifice size and follow the appliance LP conversion instructions or service manual
• Hand-tighten and then torque per manufacturer spec if provided; avoid overtightening

The Holder Orifice is an OEM component specifically designed for Whirlpool ranges. Located inside the gas burner unit, the orifice holds the brass valve that regulates gas flow to each burner flame. Its sturdy construction and precisely sized opening ensure a stable, controlled fuel supply.  

Causes of a bad holder orifice can include mineral deposits building over time which diminish sizing accuracy or cracks developing that cause leaks.

Symptoms of a bad holder orifice include:  

• Burners emitting unstable or sporadic flames of abnormal sizes
• Inability to efficiently ignite or achieve proper burner settings  
• Strong gas or fuel smells coming from the range top
• Discolored or corroded brass components

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore cooking appliances. 

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Conversion Kit is an OEM part for Whirlpool gas ranges and cooktops. It allows the unit to be converted from natural gas to liquid propane fuel. The kit includes all 5 orifices.

Causes of needing a new conversion kit include a change in fuel source from natural gas to propane or vice versa. It may also be required if any gas system parts like valves or regulators become damaged or fail inspection. 

Symptoms of improperly converted or missing conversion components include:

• Incorrect burner flame pattern or color 
• Inefficient or irregular heating 
• Gas smell 
• Visible yellow flame instead of blue

This Whirlpool OEM kit is compatible for use on Whirlpool, Maytag, KitchenAid, and some Jenn-Air and Kenmore models.

The LP Cnvrsn-Kit is an OEM part compatible with Whirlpool ranges. It allows a range to use liquid propane gas instead of natural gas. The kit includes all necessary components to safely convert the range.

Symptoms of a bad conversion kit include:

• Gas leaks around pipe connections 
• Unable to light burners or ovens due to issues with gas flow
• Changes in flame color or uneven cooking performance

Causes of a bad conversion kit can include damaged or worn-out components that no longer regulate gas pressure properly or provide a secure connection. 

This replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Orifice meters gas flow to a cooktop or range burner, helping maintain correct flame size and reliable ignition. Replacing a clogged or damaged orifice restores consistent heat and more stable burner performance. What it does:

• Meters and controls the gas flow to a single burner so the flame burns at the proper height.
• Helps maintain steady ignition and even heating across the burner.
• Common symptoms indicating replacement: weak or uneven flames, difficulty lighting, or burners that won't stay lit.
• Clogged by debris or corroded over time, causing restricted gas flow.

• Turn off the appliance power and shut off the gas supply before attempting any service.
• Verify the correct orifice size and gas type for your appliance using the OEM diagram; use proper seals and avoid overtightening.
• If you smell gas, stop immediately, ventilate the area.