Whirlpool Range Hinge Parts

Genuine Whirlpool part

Whirlpool Door Hinge

By: Whirlpool

Part Number: WPW10299225

This door hinge supports and pivots the appliance door so it opens smoothly and closes securely. Replacing a worn hinge restores proper alignment and sealing to help the door latch correctly and operate as designed.

Provides the pivot point and maintains door alignment
Helps ensure smooth opening/closing and proper latching
Supports a tight seal to prevent gaps, rattles, or temperature/moisture loss
Typical failure signs: door sags, binds, squeaks, or won't stay closed/aligned

What's included: 1 door hinge Install notes:

Disconnect power before service; wear gloves to protect from sharp edges
Support the door and control any spring tension; remove mounting hardware and the old hinge
Install the new hinge in the same orientation; transfer any reusable hardware
Adjust as needed

$55.36

Compare At:: $65.88
You Save:: $10.52

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Whirlpool Door Hinge

5.0 (1)

By: Whirlpool

Part Number: WPW10299226

This door hinge supports and guides the appliance door so it opens and closes smoothly and stays aligned with the latch and gasket. Replacing a worn hinge restores proper fit and closing action to reduce rubbing and poor sealing.

Provides the pivot point and supports the door's weight during operation
Maintains alignment for an even gap and consistent seal
Helps correct sagging, scraping, or a door that won't close flush
Common signs of wear: bent/cracked hinge, squeaking or popping, misalignment

What's included: 1 door hinge Install notes:

Disconnect power before servicing and support the door to prevent strain or damage
Remove mounting fasteners; transfer any reusable screws, spacers, or covers from the old hinge
Install and snug fasteners, then check door alignment and closure; adjust as needed
Open and close the door several times to verify smooth operation and recheck fasteners

Also known as: Hinge-Act, Door (OEM terminology)

Do-It-Yourself Stories from Customers like You Hinge broke on stove Jack B. • Dallas , TX • April 03, 2020

With part ordered from your website. Read more

$52.30

Compare At:: $62.24
You Save:: $9.94

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Whirlpool Oven Door Hinge, Single

By: Whirlpool

Part Number: WPW10485733

This oven door hinge restores smooth, controlled door movement and a proper seal. Worn hinges can cause a sagging door, poor closure, or binding—replacing the hinge helps maintain safe operation and consistent cooking performance.

Supports the oven door with a spring mechanism for controlled opening and closing
Helps pull the door tight against the gasket for an effective seal when closed
Works with the opposite hinge to keep the door aligned and stable
Common symptoms include door not closing fully, sagging or dropping, hard-to-open/close action, or heat escaping around the door

What's included: One oven door hinge assembly Install notes:

Disconnect power and allow the oven to cool completely before servicing
Remove the door following your model's instructions; engage hinge locks or use retaining pins if provided
Replace the hinge in the same orientation; ensure hinge arms are fully seated in the receivers
Reinstall the door and verify smooth motion and a complete seal

$43.95

Compare At:: $52.30
You Save:: $8.35

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Whirlpool Oven Door Hinge

By: Whirlpool

Part Number: WPW10485732

This oven door hinge restores smooth, controlled movement so the door opens easily and closes fully for a reliable seal. Replacing a worn hinge helps reduce heat loss and supports consistent cooking performance and safe operation.

Provides the pivot and spring-assisted action for opening and closing the oven door
Helps pull the door closed and hold it at intended stop positions
Maintains even gasket contact to keep heat inside the cavity
Common symptoms of a failing hinge: door won't close fully or sit flush, drops or slams open, binds or pops when moving, or shows an uneven gap

What's included: One oven door hinge assembly Install notes:

Disconnect power and allow the oven to cool completely before servicing
Support the door; open to the removal position and release hinge locks, then lift the door off
Use caution—hinge springs are under tension; wear hand and eye protection
Install in the same orientation and verify door alignment and smooth operation after reassembly

$43.95

Compare At:: $52.30
You Save:: $8.35

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Whirlpool Door Removal Pin Kit

4.6 (13)

By: Whirlpool

Part Number: 814381

Kit includes 4 pins.

Do-It-Yourself Stories from Customers like You Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016

I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more

$10.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart