Whirlpool Range Knob, Dial & Button

Color: Biscuit

Color: Grey/Chrome - This is a control knob that is used on many stoves, ranges, and ovens. The control knob is the component that controls the heating elements. The control knob is used to turn the elements from off to on and back. They also control the temperature settings. Regular use can start to strip the inside of the knobs so they do not fit properly over the shaft. When this occurs, the heating elements cannot be controlled. The control knob will need to be replaced to safely use the stove or oven. When replacing the control knob, the stove should be powered off and cool to the touch. Use a flathead screwdriver to pry the original knob off of the range so the control shafts can be seen. Use a degreaser to clean the control panel and shafts before placing the new control knob. Make sure the appliance is powered on before use. This control knob is sold as an individual product. It is an authentic OEM replacement component that is sourced directly from the manufacturer. The knob is made to be used with ranges, stoves, and ovens manufactured by Whirlpool.

This selector switch escutcheon is the black trim plate that fits around the control knob on the console. It restores a clean, finished look and proper alignment around the switch when the original bezel is cracked, missing, or faded.

• Finishes the opening around the selector switch and protects the panel edges
• Helps the control area look clean and aligned with the knob
• Replace when the bezel is cracked, warped, missing, or discolored
• Cosmetic component; the switch itself may be faulty

• Disconnect power before servicing
• Pull the control knob straight off the switch shaft
• Release tabs or remove screws (as applicable), lift off the old escutcheon, and align/install the new one
• Reinstall the knob and restore power; verify smooth knob movement

Color: Black

The Knob is an OEM part for Whirlpool ranges and cooktops. This knob allows for easy adjustment of temperature settings, ensuring that you can accurately select the desired level of heat for your cooking needs. 

Causes of a bad Knob can include physical damage from impact or excessive force, wear and tear from regular use, or environmental factors that cause the material to degrade over time.

Symptoms of a malfunctioning Knob include:

• Difficulty in turning or adjusting the knob
• The knob not engaging with the control mechanism properly
• Visible wear, damage, or breakage that affects functionality

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
 

Color: White. Other colors: For black knob use WP8053595, for almond knob use WP8053597.

This replacement control knob provides a secure, easy-to-grip interface for operating a range or oven control shaft so you can select heat and function settings confidently. Restores tactile control when an original knob is missing, cracked, or worn. What it does:

• Replaces a worn, cracked, or missing control knob so you can turn the control shaft easily
• Fits a standard push-on control shaft and transmits user input to the appliance control
• Helps stop slipping or spinning problems caused by stripped or damaged knobs
• Improves safety and usability by restoring a reliable grip and clear pointer position

• Push the knob straight onto the control shaft until it seats; do not force or twist excessively
• Always unplug the appliance or shut off power at the breaker before working near controls
• Inspect the shaft and splines for damage; replace the shaft or switch if the knob still slips
• Keep removed hardware and broken pieces away from children and pets

This is a control knob for select cooktops/ranges. It lets you set burner heat levels by turning the surface valve shaft. Replacing a worn or cracked knob restores accurate control and a clean, finished look.

• Attaches to the burner control valve stem to adjust flame/heat
• Worn splines or a cracked hub can cause the knob to slip or not turn the valve
• Cosmetic damage or missing knob can make settings hard to read or select
• Stiff, loose, or non-responsive operation can indicate the knob needs replacement

• Disconnect power and allow all surfaces to cool before servicing
• Pull the old knob straight off the valve stem; avoid twisting the stem
• Align the new knob's insert with the flat on the valve shaft, then press firmly
• Test each position for smooth operation before use

This replacement dial is the printed indicator plate that sits behind a control knob. It restores clear, easy-to-read setting marks so you can quickly choose the desired option and operate the appliance confidently.

• Mounts behind a selector/control knob to display settings and reference marks
• Helps ensure accurate selection and proper knob orientation
• Replace when markings are faded/illegible or the dial is cracked, warped, or missing
• Symptoms include difficulty reading settings and cosmetic damage on the control panel

• Disconnect power to the appliance before servicing
• Pull the control knob straight off the shaft
• Remove the old dial; align the new dial with the panel/indexing
• Reinstall the knob and verify pointer-to-mark alignment

RF White

This replacement control knob restores a secure, easy-to-grip interface for selecting settings on compatible appliances. It replaces a cracked, loose, or missing knob so you can reliably turn controls and change cycles or temperatures. What it does:

• Provides a firm grip for rotating a control shaft to select settings
• Replaces damaged, worn, or missing knobs that slip or won't engage
• Restores proper alignment with the control shaft splines for accurate selection
• Commonly used when a knob is cracked, loose, or completely broken

• Disconnect power to the appliance before servicing to avoid shock or injury
• Most knobs pull straight off the control shaft; align splines and push the new knob fully onto the shaft
• If knob is secured with a set screw, loosen/tighten with the appropriate screwdriver; do not overtighten

Color: White