Whirlpool Range Knob, Dial & Button

The Knob is an OEM part for Whirlpool ranges. It allows for easy adjustment of settings with a turn of the hand. 

Causes can relate to normal wear and tear over time from frequent adjustments. Exposure to heat, cleaning chemicals, or physical impacts may also damage knobs.

Symptoms of a bad knob include:

• The knob being loose, wobbly, or falling off completely
• Difficulty selecting temperatures accurately due to instability
• Inability to read corresponding numerals or graphics
• Blackening or burning on one side of food

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bushing is an OEM replacement part for Whirlpool wall ovens. This component acts as a sleeve to reduce friction and ensure smooth movement in various mechanical parts of the oven, such as door hinges or rotating elements. Properly functioning bushings help maintain the alignment and durability of these parts over time.

Causes of a bad Bushing can include wear and tear from repeated use, lack of lubrication leading to increased friction, or damage caused by misalignment or heavy loads. A failing bushing can lead to inefficient operation or damage to connected components.

Symptoms of a bad Bushing include:

• Squeaking or grinding noises during oven door movement
• Difficulty opening or closing the oven door smoothly
• Misalignment of moving parts

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Knob is an OEM part for Whirlpool ranges. Offers precise control over your temperature settings. This part is essential for the accurate operation of your range, allowing you to set and adjust cooking temperatures with ease.  

A common cause for the need to replace the oven knob can be attributed to physical damage or wear over time. With repeated use, knobs can become loose, making it hard to select the correct temperature settings.  

Symptoms of a bad Oven Knob include:

• Difficulty in turning the knob, which may feel stuck or overly tight
• The knob slipping or not catching onto the spindle, preventing accurate temperature adjustments
• Visible wear or damage, such as cracks or melting, which can occur from exposure to high temperatures or accidental impact

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Surface Knob is an OEM part for Whirlpool ranges and cooktops. It allows users to control the heat level of the surface burners, providing precise adjustments for cooking. The knob fits securely onto the control valve stem, ensuring accurate and reliable operation.

Common causes of a bad surface knob include frequent use, physical damage from impacts, or exposure to high heat. A faulty knob can hinder your ability to control the burner accurately, affecting cooking performance.

Symptoms of a bad surface knob include:

• Difficulty turning the knob
• The knob not staying in place or slipping off
• Inaccurate heat control
• Visible cracks or damage to the knob

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Burner Knob is an OEM part designed for Whirlpool ranges. It fits onto the burner control valve, allowing you to adjust the flame level and temperature while cooking.

Color: Black

Burner knobs can suffer damage or malfunction due to regular use, accidental impacts, or heat exposure over time. These conditions can cause the knob to crack, become loose, or stop rotating smoothly.

Symptoms of a faulty burner knob include:

• Difficulty adjusting the burner flame level
• Knob slipping or not turning smoothly
• Knob falling off or feeling loose
• Burner not responding accurately to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The knob is an OEM part for Whirlpool ranges. It provides an accessible interface for temperature and function selection via an easy to grip design. The knob allows for setting of temperature for the surface elements.

Causes of a bad knob can include wear and tear over time, exposure to excessive heat warping the surface, or accidental damage compromising integrity.

Symptoms of a bad knob include:

• Looseness, wobble or inability to secure firmly on the stem
• Faded or illegible markings limiting functionality
• Cracks or breaks that could be a hand safety hazard

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This control knob barrel is the inner sleeve that connects the knob to the control shaft. Replacing a worn or cracked barrel restores a snug fit so the knob turns the switch or valve reliably without slipping.

• Couples the knob to a D-shaped or splined control shaft
• Restores positive engagement for smooth, accurate adjustments
• Replaces a stripped, cracked, or missing inner sleeve
• Common symptoms: loose or wobbly knob, knob spins without changing settings, or falls off

• Disconnect power; for gas appliances, shut off gas supply
• Pull the knob straight off; remove the damaged barrel from the knob
• Align the new barrel with the shaft shape and press it fully into the knob
• Push the knob back onto the shaft until seated; verify proper operation

This grommet is located between the glasstop and the knobs. Color: White. Measures about 2 inches in diameter. For black order W10854242. For biscuit order 3191817.

Color: White. This knob measures about 2 inches in diameter. For black use WP98006100. For biscuit use WP98008208. Sold individually.

Color: Stainless Steel

The Knob is an OEM part for Whirlpool ranges. It provides selection of cooking functions and specific temperature levels.  

Causes of a bad knob can include cracked or warped knobs due to high heat exposure over time, loose/worn internal mechanisms, or damage from impact or moisture.

Symptoms of a bad range knob include:

• Knob that feels loose, wobbly or dysfunctional when selecting functions
• Inability to reliably set desired cooking temperatures
• Knob detaching from shaft or assembly during use
• Unintended changes or engagement of cooking functions

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Top Burner Control Knob is an OEM part for Whirlpool ranges. This knob allows you to control the heat level of the stovetop burners, providing precise adjustments for cooking.

You should replace the control knob if it becomes damaged or worn out. Causes of a bad control knob can include frequent use, accidental impact, or exposure to high temperatures, which can result in the knob becoming loose, cracked, or difficult to turn.

Symptoms of a bad top burner control knob include:

• Difficulty turning the knob
• The knob not staying in place
• Cracks or visible damage
• Inconsistent heat levels when adjusting the burner

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This control knob attaches to the switch shaft so you can select settings on your appliance. Replacing a cracked or stripped knob restores a secure grip and smooth, accurate operation when turning the control.

• Attaches to the control shaft/stem to adjust settings
• Provides a clear pointer and handhold for precise selection
• Common symptoms: cracked/split knob, spins without engaging the control, wobbly/loose feel, missing knob
• Restores normal feel and alignment at the Off/selected positions

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Pull the old knob straight off the control shaft—avoid prying tools that could damage the panel
• Align the new knob with the shaft orientation and press firmly until fully seated
• Check pointer alignment at Off and reseat if needed

The Range Knob is an OEM part for Whirlpool electric ranges and cooktops. Located on the range's control panel, this knob provides an interface for users to select cooking modes and easily adjust temperature settings on the oven and surface units. 

Causes of a faulty range knob include repeated exposure to heat and steam over time which causes plastic components to degrade and labels to fade. Mechanical wear from frequent use can also negatively impact knob operation.

Symptoms of a problematic range knob include: 

• Difficulty turning the knob to the desired setting  
• Knob continuously slipping out of selected position
• Illegible or missing graphics on the knob face

This genuine OEM Whirlpool replacement knob also fits select Maytag, KitchenAid, Jenn-Air, and Amana models.

Range surface unit knob. Color: Black. Size: 2 inches in diameter. It measures about 2 inches in diameter. For white order WP3196232. For bisque order WP3196233.

This OEM Replacement Part is a Whirlpool-manufactured knob intended for ranges, stoves, and ovens. This part serves as a replacement for a lost, broken, or defective knob. The knob plays a crucial role in turning the stove on and off and adjusting the flame intensity from the burner head. It features a D-shaped shaft and requires no tools for replacement.

Causes of a bad knob can include wear and tear from frequent use, accidental damage from forceful turning or impact, or degradation of the internal mechanism that secures the knob to the control panel. A faulty knob can make it difficult to adjust settings or may prevent the appliance from operating correctly.

Symptoms of a bad Knob include:

• Knob not turning smoothly or slipping
• Difficulty in selecting or changing settings
• Knob falling off or not staying in place
• Cracks or visible damage to the knob

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: brushed chrome. It measures about 2 inches in diameter.