Whirlpool Range Knob, Dial & Button

The Knob Bezel is an OEM Replacement Part designed for Whirlpool cooktops. This part is located behind the burner knob and serves the crucial role of labeling different burner settings. 

Causes of a bad bezel-knob can include regular wear and tear, accidental impacts, or exposure to heat and cleaning chemicals. Over time, the bezel may crack, discolor, or become loose.

Symptoms of a bad bezel-knob include:

• Cracks or breaks in the bezel
• The bezel becoming loose or falling off
• Discoloration or fading
• Difficulty in turning the control knobs due to misalignment

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black

This black surface burner control knob restores easy, precise control of your cooktop or range heat settings. Replace a cracked or missing knob so you can securely turn the valve from Off to your desired temperature.

• Attaches to the surface burner valve stem to select Off through Low–High settings
• Provides a clear pointer and secure grip for everyday adjustments
• Helps restore smooth engagement when turning the control
• Replace if the knob is cracked, stripped, loose/falls off, melted, or hard to turn

• Disconnect power and shut off gas; allow all surfaces to cool before service
• Pull the old knob straight off the valve stem—avoid prying or twisting forcefully
• Align the new knob with the stem flats/D-shape and press straight on until fully seated
• Test each setting for proper engagement before use

Color: Black. It measures about 2 inches in diameter.

This replacement control knob restores safe, easy adjustment of your appliance's settings after a worn, broken, or missing knob. Simple to install and gives a secure grip for precise control so your appliance works the way you expect. What it does:

• Replaces a cracked, damaged, loose, or missing control knob so you can change settings reliably.
• Provides a positive grip to reduce slipping or spinning on the control shaft.
• Helps restore intuitive tactile feedback for temperature, timer, or cycle selection.
• Works as a like-for-like replacement when the original knob is worn or lost.

• One control knob.

• Disconnect power (unplug the appliance or shut off breaker) before starting any repair.
• Pull the old knob straight off the control shaft; align the replacement indicator with the shaft and press firmly until fully seated.
• If the old knob is stuck, use a cloth for grip and apply steady, even force; avoid metal tools that could damage the control panel.

Replacement control knob for select Whirlpool appliances that restores safe, reliable operation of the control shaft. Replace a cracked, stripped or missing knob so you can accurately select cycles, temperatures or functions. What it does:

• Snaps onto the control shaft to let you turn and set appliance functions or temperature settings.
• Replaces knobs that are cracked, melted, stripped, loose or missing and no longer provide positive engagement.
• Restores the indicator pointer so you can clearly see the selected setting.
• Compatible with matching splined control shafts.

• Always disconnect power (unplug or shut off breaker) before servicing controls.
• Pull the old knob straight off the shaft; align the replacement's indicator with the shaft flat/spline and push on firmly until seated.
• If the knob won't seat or turns loosely, inspect the control shaft for damage—replace the switch or shaft assembly if needed.

This is a replacement control knob that restores a secure grip and smooth adjustment of settings when the original is cracked, stripped, wobbly, or missing. Simple press-on design refreshes both function and appearance. What it does:

• Attaches to the control shaft to turn a switch or valve and select settings
• Restores accurate selection when the original knob is worn or damaged
• Common symptoms: cracked knob, stripped insert, loose/wobbly fit, falls off, hard to turn

• 1 control knob

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the shaft; avoid bending or twisting the control shaft
• Align the new knob with the shaft shape (flat/D or spline) and press straight on until fully seated
• Inspect the shaft or insert for damage or debris

• Knobs that look similar may have different shaft shapes and orientations—match by part number for your model.

The Range Control Knob is an OEM replacement part for Whirlpool electric ranges. It fits over the infinite switch to control the heat levels of the surface elements. This knob allows precise adjustment of temperature settings, enabling users to easily select the appropriate heat levels for cooking.

Color: Black

Over time, the control knob can become damaged or worn out due to regular use. Issues like a loose or cracked knob, difficulty in turning it, or the knob not staying securely in place could indicate the need for replacement.

Symptoms of a faulty Range Control Knob include:

• Difficulty turning the knob or selecting heat levels
• The knob feels loose or wobbly
• The knob is cracked or visibly damaged

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This white control knob attaches to a surface burner's infinite switch. It turns the element on/off and selects heat levels; replacing a worn or broken knob restores smooth, accurate control of the surface burner.

• Attaches to the surface burner's infinite switch to control heat settings
• Restores on/off and temperature selection when the original knob is damaged or missing
• Common symptoms: knob cracked, stripped, loose/wobbly, or missing

• Turn all controls off and disconnect power to prevent accidental activation
• Pull the old knob straight off the switch shaft—do not pry sideways
• Align the new knob with the switch shaft and press firmly until fully seated
• Test the control through the full range of settings

Color: black. Measures about 1-1/2 inches in diameter.

This black surface burner control knob replaces a worn or broken knob on your cooktop or range. It lets you securely turn the valve stem to start the burner and adjust the flame with normal feel and control. What it does:

• Attaches to the burner valve stem to control on/off and flame level
• Common fix for a knob that is cracked, loose/spins freely, or missing
• Helps restore proper feel when turning and selecting burner settings

• 1 black control knob

• Ensure all burners are off and the surface is completely cool before servicing
• Pull the old knob straight off the valve stem; align the new knob and push straight on—do not force
• If the valve stem is damaged or seized, the gas valve will need service; the knob alone will not correct that issue

Color: Black. For biscuit use WP8522567. For white use WP8522565.

This replacement control knob restores a worn or damaged gas range control interface so you can safely and accurately adjust burner/oven settings. It gives a secure grip and reliable rotational control for normal operation. What it does:

• Fits onto the gas control shaft to allow manual selection of burner or oven settings.
• Restores proper tactile feel and alignment when the original knob is cracked, stripped, or missing.
• Helps prevent accidental slips or imprecise adjustments that make flame/temperature control difficult.
• Common symptom: knob spins, won't engage the valve, or is physically broken and cannot be used.

• Turn off gas supply and electric power to the appliance and allow all surfaces to cool before attempting replacement.
• Remove the old knob by pulling it straight off the control shaft; align the new knob to the splines and push it firmly into place.
• Do not force the knob if it doesn't seat smoothly; double-check alignment.

This control knob replaces a damaged or missing range/oven control knob to restore safe, reliable control of temperature and cooking settings. It provides a secure grip and direct engagement with the control shaft for accurate adjustment. What it does:

• Fits onto the appliance control shaft to select temperature, burner or oven settings
• Restores grip and tactile feedback when the original knob is cracked, stripped or missing
• Prevents accidental setting changes caused by a loose or damaged knob
• Works with split-shaft or D-shaft style controls depending on your original knob design

• Pull-off style: firmly pull the old knob straight off the control shaft; push the replacement knob on until fully seated
• Verify shaft type and alignment before forcing the knob onto the control; do not hammer or over-torque
• Disconnect power or follow appliance safety procedures when working near heating elements or live controls

This replacement control knob lets you select settings again when the original is cracked, stripped, or missing. It fits onto the control shaft to provide a secure, easy-to-grip interface for everyday operation.

• Replaces a broken, worn, or missing selector knob
• Restores smooth, positive turning of the control shaft
• Helps ensure the pointer aligns with settings and the Off position
• Common symptoms: knob cracks, spins freely, slips, or falls off

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off; avoid prying or twisting past the stops
• Align the new knob with the stem shape and push straight on until fully seated
• Verify smooth operation and proper alignment with the Off position after installation

This is the thermostat knob that mounts on the control shaft so you can set the temperature. Replace a cracked, stripped, or missing knob to restore smooth, reliable adjustments and clear control of your settings.

• Attaches to the thermostat shaft to select and adjust temperature
• Restores secure engagement if the original knob is cracked or stripped
• Helps ensure settings can be changed as intended
• Common signs include a loose, wobbly, broken, or missing knob

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying that could damage the shaft
• Align the new knob with the keyed/flat side of the shaft and press on firmly
• If your model uses a set screw, align the knob and tighten it before testing operation