Whirlpool WPW10110491 Spark Module OEM Part

Replaced module: Although the new module was slightly different due to a third or ground terminal that was not on the original I managed to figured out that I did not need to worry about the ground since the existing wiring had already allowed for the connection. Easy repair. I ordered the part one day and it was delivered the next and that was using the least expensive delivery service. You guys are great

Sealed burner gas cooktop has to be removed from the counter top in order to disassemble. This means disconnecting the gas line. To disassemble the unit you will have to remove the gas line regulator. Once the unit is separated you will see the spark module. I replaced the module. Note: Because the new module has been updated from the original it does look different. I suggest you put the new module along side the old taking one wire at a time from the old to the new. If your unit is as old as mine (15yrs) I suggest replacing all the burner ignitors while you have the unit apart. All said and done the new spark module fixed the problem.

Replaced spark module.

After a bit of web research, I purchased a new spark module for my gas range. Installation was very easy, although the new replacement was a bit longer than the pre-existing part. I also needed to replace the screw that holds the module in place with a longer one because of the design of the module housing, but that was no big deal. The repair was extremely easy, anyone would be able to do it. I can once again light my burners!

With AppliancePartsPros,com of course.