White Outdoor String Trimmer Parts

This throttle housing & trigger assembly is a genuine MTD replacement part for a handheld gas lawn trimmer. A lawn trimmer is designed to cut grass, shrubs, bushes, and weeds. The throttle housing & trigger assembly is a kit containing a black plastic throttle housing, a trigger, a spring, and the screws to bind the pieces together. The function of a throttle housing is to house the throttle for the lawn trimmer, which spins the blades at specific velocities, with a full throttle corresponding to full blade velocity. The trigger assembly consists of the trigger itself, the hammer, the disconnector, and the springs, and the function of the trigger is to activate the engine, thereby engaging the throttle.In order to replace the throttle housing, the engine must not be running and the oil should be emptied from the tank. If the throttle housing & trigger assembly is damaged to the point that the lawn trimmer is unusable, the throttle housing & trigger assembly should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This throttle housing & trigger assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Bolens. This part sold individually.

This throttle trigger spring is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. This throttle trigger spring is designed for use with edgers or trimmers. It is compatible with products from brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.The throttle trigger spring part is crucial to the proper functioning of the throttle. The purpose of the throttle trigger spring is to help the throttle trigger to retract. The replacement or repair process of the throttle trigger spring should be straightforward, but a screwdriver and pliers will be necessary to complete the replacement. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This throttle trigger spring is made out of metal.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

This reel spool assembly is specifically designed for use with string trimmers and comes with all necessary parts, including the trimmer line and the spool. The line itself is used when the trimmer is in use to cut grass and foliage. The spool is the component that the string is wrapped around to keep it secure while using the trimmer.If the reel spool or the line is damaged or broken, the reel spool assembly should be replaced. A wrench or a screwdriver will be needed to go through the process. When replacing the parts in the reel spool assembly, the spool cover will need to be removed. Make sure the string trimmer is on a sturdy surface and the spark plug wire has been disconnected. Place the spool assembly in the housing, feed the line, and replace the cap.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The reel spool assembly is compatible with many string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

This fuel line hose is an authentic OEM replacement part for various lawn mowers, tractors, and snow blowers. The fuel line is responsible for carrying fuel from the fuel tank to the carburetor. It is made of a thick vinyl rubber material and clamps onto the exterior of the lawn appliance. Although they are usually made of durable rubber, fuel lines can tear if they are caught on something while the appliance is in use. If the fuel line rips, fuel will leak from the fuel tank and carburetor onto the appliance and the operator. This has the potential to start a fire and should be fixed as soon as possible. It is recommended that all fuel be drained from the appliance before making this repair. Using a pair of needle-nosed pliers, detach the damaged fuel line from the appliance and pull it out from the carburetor and through the fuel tank. Reassemble with the new hose using the pliers. This part is a high-quality replacement hose sourced from its original manufacturer and is compatible with Cub Cadet, Huskee, Yard Man, MTD, Troy-Bilt, and Yard Machines appliances. This part does not ship mounting clamps or any additional hardware.

This fuel line assembly is created for use with string trimmers and is used to bring gasoline to the small engine in a lawn and garden tool. As the string trimmer is used, the fuel line assembly can start to break down, which may result in cracks in the fuel lines or discoloration. This can cause the fuel line to stop working the way it should, which will affect the performance of the trimmer. If the fuel lines are no longer the correct color or seem brittle, a replacement is likely needed. The line can be pinched to see if there are any visible cracks. In some cases, the primer bulb will no longer seal the way it should and will create more air than expected when priming the trimmer. Another sign that the fuel line assembly is damaged is lower power when someone uses the throttle. This is a genuine OEM part that comes directly from the manufacturer. It is a single part that is designed for use in Troy-Bilt, Craftsman, MTD, and Yard-Man string trimmers. No additional tools are needed to make the replacement.

The torsion spring is designed to create tension between various components in lawn and garden equipment engines. This spring may have multiple applications depending on the type of machine. The torsion spring typically connects levers and other things that need pressure to operate properly. They create torque and help support various items in lawn and garden machines. Over time, they can become worn or the springs can stretch or snap. This will require a replacement of the entire spring, since the unit will typically not be able to function without a properly working torsion spring. This genuine OEM replacement spring is manufactured to exact standards by MTD. This part can be found in hundreds of models from MTD, Yard Machines, Cub Cadet, Troy-Bilt, Husky, Bolens, and Yard-Man. Check the parts diagrams and equipment manual for the exact location and application of this torsion spring. This high-quality spring is made of metal and is sold as an individual unit. Always wear gloves when performing repairs on lawn and garden machines. Beware of pinching and crushing injuries when working with springs, which are typically under a lot of pressure.

This genuine OEM replacement part is an extension spring for a Craftsman snowblower idler pulley assembly. The idler pulley attaches to a part of the snowblower's housing and is helps to transfer energy throughout the belt drive. This extension spring helps to redistribute some of the back-and-forth motion created in the pulley as the snowblower runs. This keeps the assembly from shifting out of place and potentially slipping. This extension spring is attached at two points and, if pulled in both directions too far, can eventually lose some of its tension. When this happens, the idler assembly can begin to shake and even slip out of place. Replacing the extension spring is an easy job that will only require a socket wrench to remove the idler pulley. A pair of pliers may help to remove the spring from its clips. This part is only compatible with Craftsman snowblowers and is sourced from its original manufacturer. It ships individually and any additional parts needed will have to be purchased separately.

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

This is a genuine OEM idler arm bracket sourced directly from the manufacturer; it is used on various lawnmowers and garden tractors to support the idler arm, which applies tension to the blade drive belt and allows the belt to turn. If the idler arm bracket bends or breaks, the idler arm will not stay in place and the blades will not turn. The idler arm is essential to the mower being able to do its job and cut the lawn. The idler arm support brackets can be damaged by debris and stationary objects encountered while in operation.A wrench set is needed to remove and reinstall the idler arm support bracket. Before starting, remove the fuel from the gas tank and take the spark plug out. The idler arm support bracket is located under the idler arm and is found on the deck of the mower. Detach the deck from the lawnmower to access the idler arm support bracket. Remove the damaged support bracket and install the new one with the screws from the original bracket. Reinstall the mower deck, spark plug, and fuel.This idler arm bracket is made of heavy-duty metal and sold as an individual unit. It is compatible with push lawn mowers and riding lawn mowers manufactured by Yard-Man, Troy-Bilt, MTD, and Cub Cadet.