Yard Machines Hose, Tube & Fitting

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

This is an OEM primer hose assembly replacement sourced directly from the manufacturer. It is used on various outdoor lawn and garden small engines. The primer hose is inserted into the fuel tank. This hose then connects to a bulb that forces the fuel to the carburetor to start the engine. Excess fuel is forced back into the fuel line. Normal wear and tear can cause the line and primer bulb to become brittle and crack, making it unable to move fuel into the carburetor.A Phillips screwdriver, long-nosed pliers, standard screwdriver, and a pan to drain the fuel are necessary to remove and replace the primer hose assembly. This project can be complete in less than half an hour. Drain the fuel from the fuel tank and fuel lines before starting the project. Remove the rear cover and take the carburetor and fuel lines off the engine. Install the primer hose and primer bulb. Reinstall the parts and fill the fuel tank. Pump the primer bulb to make sure it is installed correctly.This primer hose assembly is made of plastic and rubber and is sold as an individual kit. It is compatible with tillers and other small engines manufactured by MTD, Cub Cadet, and Yard Machines.

This is a genuine OEM primer hose replacement part sourced directly from the manufacturer. It is used on tillers and other outdoor power equipment with a primer bulb assembly. The hose is the part of the assembly that runs from the fuel tank to the carburetor. When the primer bulb is pressed, fuel is collected from the tank and pushed into the carburetor to start the engine. Any unused fuel is released back into the fuel tank. If the primer hose has cracks or holes in it, the vacuum inside the hose will be lost and the primer bulb will not force the fuel to the carburetor. These cracks or holes can occur over time due to fuel eroding the hose material. If the primer bulb is not working and fuel cannot be seen in the tube, the primer hose should be inspected and replaced if necessary.Before replacing a primer hose, empty the fuel from the fuel tank and fuel lines into a clean container. Remove the spark plug. Remove and replace the primer hose. After refueling, check the primer bulb to ensure the primer hose is pulling fuel. This primer hose is clear plastic material; it is sold as an individual unit. This hose is compatible with tillers, chippers, shredders, and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.