Need Help?
Call or text
The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.
Replacement foot pedal pad for lawn tractors and riding mowers. Installs on control pedals. Needed when original pad is worn, cracked, or missing.
Replacement shoulder screw for walk-behind mowers. Secures components in place. Order if your original screw is lost, stripped, or damaged.
Replace the steering tie rod on your lawn tractor. This rod connects steering components and requires replacement when bent, damaged, or worn.
This genuine OEM replacement bracket stop seat is for riding lawn mowers or tractors. The part is located underneath the seat on riding mowers or tractors. Its purpose is to provide a safety shut off function when the rider leaves the seat while the blade is engaged. Over time, constant use of the mower can cause wear on the bracket, requiring it to be replaced. If a mower is left in the elements over an extended period of time, the bracket could rust. This would require the bracket to need replacing. Failure to replace a worn or rusted bracket stop seat could cause potential safety hazards as the engine may to fail to shut off if the rider should leave the seat while the blade is engaged. Replacing a bracket stop seat requires a screwdriver to replace. It is a fairly easy repair that should take under 30 minutes to complete. This part serves as a replacement if needed for the original bracket stop seat. This bracket is compatible with Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Husky, Montgomery Wards, Bolens, Yard-Man, and Ryobi brands. This bracket is sourced directly from the manufacturer and is sold individually.
This is a replacement part for riding and push lawn mowers. This 21-inch deck assembly, made up of a durable metal, is the part of the lawn mower that covers the blades. It is designed to protect the user, as well as the engine, from the blades and debris that may be shot off from the blades. The deck may become compromised by rust if the lawn mower is not properly cared for. If the deck is loosened or becomes damaged it should be immediately replaced to avoid further damage to the lawn mower itself and personal injury to the operator. Before beginning this repair, ensure the fuel from the gas tank and the oil from the engine. On a push mower, begin by removing the pull rope from the handle and the control cable from the engine. Next remove the rear portion of the mower from the deck, including the rear housing, wheels, and the handle. Tip the deck onto its side, safely remove the blade and loosen the bolts connecting the engine. Place the deck flat again and remove bolts to disconnect the engine. Lastly, disconnect the side discharge door. Remove the new deck from the packaging and discard damaged the damaged one. Reattach all parts, beginning with the side discharge door. Work backward through the steps to reattach all parts. The mower is now ready to be used.This part is compatible with lawn mowers manufactured by Yard Machines, MTD, Bolens, and Yard-Man. This is an OEM part sourced directly from the manufacturer. It is sold individually.
Mower losing power or not self-propelling? This spur gear transfers rotation and torque for smooth operation across different surfaces. Direct fit.
This part is a replacement sphere bearing assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a worn out, damaged, or defective sphere bearing in a variety of outdoor power equipment.Sphere bearings have a variety of uses. They are particularly useful for equipment with a high load capacity that also requires high tolerance and self-aligning ability. They can be found in a wheel assembly, transmissions, or other machinery parts. Sphere bearings are subject to significant wear and tear, requiring replacement. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this sphere bearing assembly, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this sphere bearing assembly is suitable for use on several different models of small engine outdoor power equipment manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, Bolens, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.
Carburetor gasket seals the insulator and carburetor connection for proper engine compression. Replace if your engine runs rough, misfires, or leaks fuel.
Throttle control knob for snow throwers and gas snowblowers. Replaces broken, cracked, or missing throttle knobs for smooth engine speed adjustment.
Replace your leaking or cracked fuel tank causing starting issues or fuel odors. Direct fit for walk-behind mowers and tillers. DIY-friendly repair.
Replace your lawn mower's carburetor gasket to fix fuel leaks and restore proper engine performance. Verify fit with your model number before ordering.
Replacement oil drain plug for small engines on outdoor power equipment. Needed when original plug is stripped, cracked, or leaking. Installs at oil pan.
Carburetor assembly for snow thrower engines. Mounts to the engine block and mixes air with fuel. Replace if cracked, clogged, or leaking fuel.